• Journal of Auto-vehicle Safety Association
• /
• v.13 no.3
• /
• pp.69-77
• /
• 2021

Although accident data from the National Police Agency and insurance companies do not know the vehicle safety, the damage level information can be obtained from the data managed by the bus credit association or the bus company itself. So the accident severity was analyzed based on the side impact accidents using accident repair cost. K-means clustering analysis separated the cost of accident repair into 'minor', 'moderate', 'severe', and 'very severe'. In addition, the side impact accident severity was analyzed by using an ordered logit model. As a result, it is appeared that the longer the repair period, the greater the impact on the severity of the side impact accident. Also, it is appeared that the higher the number of collision points, the greater the impact on the severity of the side impact accident. In addition, oblique collisions of the angle of impact were derived to affect the severity of the accident less than right angle collisions. Finally, the absence of opponent vehicle and large commercial vehicles involved accidents were shown to have less impact on the side impact accident severity than passenger cars.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.4
• /
• pp.39-47
• /
• 2020

In this study, crash situations of representative bus crash types were elicited by analyzing a total of 1,416 bus repair record which were collected in 2018~2019. K-means clustering was used as a methodology for this study. Bus repair record contain the information of repair term, type of bus operation, responsibility of accident, weather condition, road surface condition, type of accident, other party, type of road and type of location for each data. Also, by checking collision parts of each bus repair record, each record was classified by types of collision regions. From this, 760 record are classified to frontal type, 363 record are classified to middle-frontal type, 374 record are classified to middle-rear type and 331 record are classified to rear type. As mentioned, k-means clustering was performed on each type of collision parts. As a result, this study analyzed the severity of bus crash based on actual bus accident data which are based on bus repair record not the crash data from the TAAS. Also, this study presented crash situation of representative bus crash types. It is expected that this study can be expanded to analyzing hydrogen bus crash and defining indicators of hydrogen bus safety.

• Journal of Korean Society of Transportation
• /
• v.28 no.2
• /
• pp.123-133
• /
• 2010

The national standards for the installation of pedestrian crosswalks prohibits installation of crosswalks within 200 meters of nearby overpasses, underpasses, or crosswalks. In case the exceptional installation is required, the feasibility study is to be thoroughly conducted by the local police agency. However, it is an undeniable fact that the specific installation standards for optimal types and locations of crosswalks are not yet to be established. This paper examines the development of traffic accident prediction model applicable to different types and locations of bus stops(type A and type B) at mid-block intersections. Furthermore, it develops the poisson regression model which sets the "number of traffic accidents" and "traffic accident severity" as dependent variables, while using "traffic volumes", "pedestrian traffic volumes" and "the distance between crosswalks and bus stops" as independent variables. According to the traffic accident prediction model applicable to the type A bus stop location, the traffic accident severity increases relative to the number of traffic volumes, the number of pedestrian traffic volumes, and the distance between crosswalks and bus stops. In case of the type B bus stop model, the further the bus stop is from crosswalks, the number of traffic accidents decreases while it increases when traffic volumes and pedestrian traffic volumes increase. Therefore, it is reasonable to state that the bus stop design which minimizes the traffic accidents is the type C design, which is the one in combination of type A and type B, and the optimal distance is found to be 65 meters. In case of the type A design and the type B design, the optimal distances are found to be within range 60~70meters.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.29-38
• /
• 2018

This study aims to propose a method for the estimation of operational delay cost using transportation card data in bus accidents. Average operational delay time from bus accidents was surveyed among 12 bus companies through an interview method. Then, the operational delay cost was estimated using actual traffic accident data and transportation card data. Results showed that average loss time per bus accident was found to be 45 minutes. In addition, total occupancy of 659 was estimated for the accidents investigated using transportation card data, resulting a total loss time of 494.25 hours. An estimated operational delay cost was 186.9 thousand won per accident, which was 6.37% of social agency cost. The magnitude of this number implied that operational delay cost may have a significant impact on traffic accident cost if included.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.145-155
• /
• 2012

At present, Seoul City is putting the bus exclusive lane system into practice according to mass transit revitalization policy. Starting with the installation of roadside bus exclusive lane in the past, at present, even the road sections for central- lane bus exclusive lane system are on the increase. The purpose of this research is to analyze the factors giving impacts on bus accident on central bus exclusive lane and roadside bus exclusive lane. In case of the central bus exclusive lane, the 6 variables, such as the number of bus routes, number of access & entrance to central lanes patterns, whether the stop line of central lanes retreats or not, separated distance between the stop line of central lanes and crosswalks, traffic volume, and number of bus routes stopping at bus stops on reversible lanes, were found to have a significant influence on bus accidents. In case of roadside bus exclusive lane sections, the four variables such as the number of right-turn bus routes, whether to be chronic illegal parking & stopping, time for the walk signal, and forms of land use, etc. were found to have a significant influence on bus accident.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.1-11
• /
• 2019

The accident of mass transit such as a bus could draw the large casualties and this induces social and economic losses. Recently, severe bus accidents caused by tiredness and inattention of bus drivers occurred and those lead to growing interest in bus accidents and the drivers' work environment. Therefore, this study analyzes the accident based on the work environment of bus drivers and route-bus categories. For the research, this study collected digital tachograph data and the bus company information for 271 domestic bus companies in 2017 and used ANOVA test and chi-square test as statistical methodologies. As a result, we figured out there are statistically significant differences in the accident according to the working environments. Especially, the present study confirmed the intracity bus with working every other day has the most frequent accidents. We expect that the results of this study be used as foundations for the improvement of working conditions to reduce route-bus accidents in the future.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.4
• /
• pp.54-60
• /
• 2020

In a previous study, an investigation of occupant behaviors and injuries (to the head and chest) was performed during vehicle impact loading cases in order to ensure the safety of wheelchair passengers on a bus. The computational results showed overall safety tolerances of wheelchair occupants under different accident configurations. The bus crashworthiness is described as the capability of a bus to protect occupants during rollover loadings. The residual space containing occupants should be undamaged without any intrusions. However it is necessary to evaluate the residual space according to the bus occupant kinematic analysis under the rollover crash simulation. This study focuses on the evaluation of occupant behaviors during rollover loading cases in order to ensure the safety of bus passengers sitting in general seats and wheelchairs and evaluates the residual space of the bus by analyzing the bus occupant kinematics.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.6
• /
• pp.148-154
• /
• 1997

The safety problems of buses have been arisen due to the increasing of road traffic. Occupant injuries are always possible in the rollover accident and the frontal impact. Thus the structure of bus should have sufficient strength to protect passengers under accidental loads. ECE(Economic Commission for Europe) regulation No.66 prescribes that the superstructure of the vehicle shall be sufficient strength for passengers' surviving and the residual space shall be preserved in the passenger compartment during and after the standard rollover accident situation. Rollover test and simulation on a large-sized bus was completed according to the regulation. The coordinates of the points on the bus were measured by photogrammetry system. The rollover situation was revived by structural crashes simulation software, PAM-CRASH, and it was checked that the structure still complied with the requirements of residual space during rollover situation. The residual space was preserved during rollover, so it was proved that the structure of the investigated bus had much probability of survival in rollover accidents.

• Journal of Korea Spatial Information System Society
• /
• v.8 no.2 s.17
• /
• pp.1-11
• /
• 2006

This paper addresses a GIS (Geographic Information System) based system in order to reduce the rate of public transportation accidents occurring in Iranian roads network. Over the years, the road accidents are a major issue throughout the world. Today, particular consideration is given to those technologies which can lead to diminish on the number of critical incidents. One of the main factors resulting in accidents and fatalities rates growth is the speed violation of buses in Iranian road network. The conventional speed controlling approach in Iran based on the Tachograph which records vehicle's speed, time, and stoppage in the mechanical processing has many problems. Hence, this research is intended to design and implement a GIS-based system to manage road accident of Bus transportation system using offline tracking system. This was accomplished using a GIS-based technique that encompasses three steps. The first step is developing a GIS-based accident system. The second step includes designing and applying a tracking system inside 90 buses for recording Bus information for speed controlling. Lastly, by using mentioned system in police center, the illegal drivers' punishment would be considered properly. Overall, this system has been successfully applied in this work. Therefore, the police and transportation office are able to control and make policy to diminish the number of accident. It is anticipated that online tracking system through the Web GIS would be utilized In this system in the near future.

• Journal of the Korean Society of Safety
• /
• v.23 no.5
• /
• pp.15-21
• /
• 2008

The bus using compressed natural gas(CNG) trend to be extended in use internationally as optimal counter-plan for reducing discharge gas of light oil due to high concern about environment. But, Composit pressure vessels(CPV) to be equipped with CNG bus is always involved in the point that safety accidents happen due to having compressed natural gas. In this report, we analysis the cause of CPV bursting accident by reviewing design and manufacture factor and suggest preventive measure through this case.