• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.459-460
• /
• 2008

In this paper, a 10Gbps clock and data recovery circuit is designed in $0.18{\mu}m$ CMOS technology. The circuit incorporates a multiphase LC oscillator, a quarter-rate Bang-Bang phase detector, a charge pump and a second order loop filter. The simulation results show that the designed circuit has a peak-to-peak clock jitter of 4.2ps and a peak-to-peak recovered data jitter of 8ps while consuming about 80mW from a 1.8V supply.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.197-198
• /
• 2007

In this paper, a 10Gbps Clock and Data Recovery circuit is designed in $0.18{\mu}m$ CMOS Technology. The circuit incorporates a multiphase LC oscillator, a quarter-rate Bang-Bang phase detector, a Charge Pump and a second order loop filter. The simulation results show that the designed circuit has a peak-to-peak clock jitter of 4.1ps and a peak-to-peak recovered data jitter of 8ps while consuming about 44mW from a 1.8V supply.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.2
• /
• pp.19-24
• /
• 2007

With recent advancement of high-speed, multi-gigabit data transmission capabilities, serial links have been more widely adopted in industry than parallel links. Since the parallel link design forces its transmitter to transmit both the data and the clock to the receiver at the same time, it leads to hardware's intricacy during high-speed data transmission, large power consumption, and high cost. Meanwhile, the serial links allows the transmitter to transmit data only with no synchronized clock information. For the purpose, clock and data recovery circuit becomes a very crucial key block. In this paper, a 5.4Gbps half-rate bang-bang CDR is designed for the applications of high-speed graphic DRAM interface. The CDR consists of a half-rate bang-bang phase detector, a current-mirror charge-pump, a 2nd-order loop filter, and a 4-stage differential ring-type VCO. The PD automatically retimes and demultiplexes the data, generating two 2.7Gb/s sequences. The proposed circuit is realized in 66㎚ CMOS process. With input pseudo-random bit sequences (PRBS) of $2^{13}-1$, the post-layout simulations show 10psRMS clock jitter and $40ps_{p-p}$ retimed data jitter characteristics, and also the power dissipation of 80mW from a single 1.8V supply.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.10
• /
• pp.824-831
• /
• 2013

The delta driven GMSK is a modulation scheme to generate the gaussian pulse by the bipolar delta signal and to modulate the phase function with the differential gaussian pulse between $+T_b/2$ and $-T_b/2$. The demodulation of delta driven GMSK differs from conventional GMSK schemes. This paper proposed a demodulation with the differential phase detector at the end of each bit interval. A designed detector then finds the one of the possible region by hard decision, in which the phase difference lies. Finally the binary data can be recovered by state transition process. Through the BER simulation for AWGN channel, it was found that the proposed demodulation effected by the run length of binary data. The simulated BER degradation of about 2[dB] was analyzed, as compared to the theoretical coherent demodulation with $BT_b$=0.3.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.425-435
• /
• 2016

This paper describes a spread-spectrum clock generation method by utilizing a ${\Delta}{\Sigma}$ digital PLL (DPLL) which is solely based on binary phase detection and does not require a linear time-to-digital converter (TDC) or other linear digital-to-time converter (DTC) circuitry. A 1-bit high-order ${\Delta}{\Sigma}$ modulator and a hybrid finite-impulse response (FIR) filter are employed to mitigate the phase-folding problem caused by the nonlinearity of the bang-bang phase detector (BBPD). The ${\Delta}{\Sigma}$ DPLL employs a two-point modulation technique to further enhance linearity at the turning point of a triangular modulation profile. We also show that the two-point modulation is useful for the BBPLL to improve the spread-spectrum performance by suppressing the frequency deviation at the input of the BBPD, thus reducing the peak phase deviation. Based on the proposed architecture, a 3.2 GHz spread-spectrum clock generator (SSCG) is implemented in 65 nm CMOS. Experimental results show that the proposed SSCG achieves peak power reductions of 18.5 dB and 11 dB with 10 kHz and 100 kHz resolution bandwidths respectively, consuming 6.34 mW from a 1 V supply.

• Natural Product Sciences
• /
• v.19 no.3
• /
• pp.236-241
• /
• 2013

A high-performance liquid chromatography-diode array detector (HPLC-DAD) method was established for quantitative evaluation of nine constituents of Fraxinus rhynchophylla such as four coumarins, esculin (1), fraxin (2), esculetin (3), fraxetin (4), three lignans, syringaresinol 4,4'-O-${\beta}$-diglucoside (5), pinoresinol 4-O-${\beta}$-glucoside (6), pinoresinol (9), one secoiridoid, oleuropein (7), and one coumarinolignan, cleomiscosin C (8). The preferred chromatographic condition was obtained on Phenomenex Gemini-NX (3 ${\mu}m$, C18 110A, $150{\times}4.60$ mm) and the mobile phase was composed of water and acetonitrile using a gradient elution. The wavelength was set at 220 nm. Extraction condition of these constituents in F. rhynchophylla was also optimized through extraction time, extraction solvent and extraction method using established method. From this study, extraction at $70^{\circ}C$ with the mixture of ethanol and water for more than 12 h was suggested to be good extraction condition for these constituents. Quantitation of nine constituents in different F. rhynchophylla samples was also successfully accomplished with the newly established method.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.655-659
• /
• 2010

In the conventional PNC scheme, the relay node requires simultaneous transmission of two source nodes with strict power control and carrier-phase matching between two received symbols. However, this pre-equalization process at source nodes is not practical in fading channels. In this letter, we propose a novel physical-layer network coding (PNC) scheme with log-likelihood ratio (LLR) conversion for fading channels, which utilizes not pre-equalizer at transmitters (source nodes) but joint detector at receiver (relay node). The proposed PNC requires only channel side information at the receiver (CSIR), which is far more practical assumption in fading channels. In addition, the proposed PNC scheme can use the conventional modulation scheme like M-QAM regardless of modulation order, while the conventional PNC scheme requires reconfiguration of modulation scheme at the source nodes for detection of the received signal at relay node. We consider the combination of the proposed PNC and channel coding, and find that the proposed PNC scheme is easily combined the linear channel codes such as turbo codes, LDPC, and convolutional codes.

• Korean Journal of Veterinary Service
• /
• v.34 no.3
• /
• pp.285-289
• /
• 2011

This study was conducted to determine the content of non-steroidal anti-inflammatory drugs (NSAIDs) in meats available on the Korean markets. The analysis was carried out using following conditions; C18 column ($100{\times}2.1$ mm, 1.7 ${\mu}m$), mobile phase composed of DW (containing 0.1% formic acid): acetonitrile (containing 0.1% formic acid), binary pump at a flow rate of 0.3 ml/min and 5 ${\mu}l$ of injection volume, MS/MS detector with ESI positive mode. The calibration range of five NSAIDs showed linearity ($r^2{\geq}0.99$) at concentration range of 3.125~200 ${\mu}g$/kg. The recoveries in fortified muscle more than 78.7~100.3%. The detection limits for meloxicam, ketoprofen, flunixin, carprofen and tolfenamic acid were 3.5, 1.6, 1.7, 9.8 and 4.8 ${\mu}g$/kg, respectively. We also monitored NSAIDs residue in cattle muscle 51 samples. The test results, NSAIDs were all not founded.

• Food Science of Animal Resources
• /
• v.39 no.1
• /
• pp.93-101
• /
• 2019

Nucleotides play important roles in numerous intracellular biochemical processes and are used in infant formulas and other dairy products. However, domestic analytical methods for assessing nucleotide content in products have not yet been established, and therefore, methods for determining nucleotide content are urgently required. A rapid and simple analytical method for determining the content of five types of nucleotides in dairy products was improved using solid phase extraction clean-up and high-performance liquid chromatography with diode array detector. The extraction solvent used in the AOAC method was not well dissolved and was changed to hydrophilic EDTA-Na. In addition, the results obtained using the isocratic elution method and a single wavelength were similar to those obtained using the AOAC method, and the time taken for analysis was shortened from 40 min to 25 min. The process of method validation revealed the following parameters: accuracy (84.69%-102.72%), precision (1.51%-6.82%), linearity (0.999), and limit of detection (cytidine 5'-monophosphate, 0.09 mg/L; uridine 5'-monophosphate, 0.11 mg/L; adenosine 5'-monophosphate, 0.12 mg/L; guanosine 5'-monophosphate, 0.11 mg/L; and inosine 5'-monophosphate, 0.14 mg/L). The method was also used to determine the nucleotide concentration in 25 samples (infant formulas, 1.99-29.39 mg/100 g; and cow milk, 0.28-0.83 mg/100 g). The newly improved method was appropriate for analyzing nucleotides in infant formulas and other dairy products faster when compared to conventional methods.

• Applied Biological Chemistry
• /
• v.47 no.4
• /
• pp.426-429
• /
• 2004

An easy, sensitive and rapid method for the analysis of phytol, a strong ACAT (Acyl-CoA: Cholesterol Acyltransferase) inhibitory diterpenoid, was established. The pre-treatment of sample for GC analysis of phytol includes aq. MeOH extraction, partition of the extracts between EtOAc and water, and filtration of organic phase through Supelclean LC-Si SPE tube. The GC analysis of phytol for a variety of Lactuca sativa was carried out on DB-5 capillary column with flame ionization detector (FID). The consistency in phytol contents according to each variety was not shown. Especially, Jeoktoma, as RS-2 type, showed the highest phytol content.