• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.1-12
• /
• 2008

Recently, the roll of bus transit is critical more than before because of the dramatical increase in congestions and oil prices, but bus companies seriously encounter into vicious circle situation such as decrease in passenger demand, income reduction, and revenue deterioration. To tackle this, major metropolitan cities, Seoul, Busan, DaeGu, etc. have introduced a semi-public system to reinforce public function of bus. However, it was resulted in side effects that the main board of bus company did not control theirselves voluntarily, and the management and control of public sectors on bus become very important elements. In this research, the types, limitations, and development of operation-management items, and a methodology for analysis, and changes in those trends are addressed under semi-public system using APTS data. Conclusively, this study could be one of the useful application results and alternatives for the operation-management policy of bus transit-related agencies.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.69-78
• /
• 2010

To implement the high performance SoC, we propose the flying master bus architecture that a specially defined master named as the flying master directly accesses the selected slaves with no regard to the bus protocol. The proposed bus architecture was implemented through Verilog and mapped the design into Hynix 0.18um technology. As master and slave wrappers have around 150 logic gate counts, the area overhead is still small considering the typical area of modules in SoC designs. In TLM performance simulation about proposed architecture, 25~40% of transaction cycle and 43~60% of bus efficiency are increased and 43~77% of request cycle is decreased, compared with conventional bus architecture. Conclusively, we assume that the proposed flying master bus architecture is promising as the leading candidate of the bus architecture in the aspect of performance and efficiency.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.479-484
• /
• 2003

In the case of the feeder bus route choice, it is more desirable to choose the route by treating as a single route linked from origin to destination than the whole network. This study is to establish a concept that frames the feeder bus route choice technique for the change of the existing single bus route or the creation of the new feeder bus route. The concept of the feeder bus route choice technique in this study is not to frame the whole bus network but to frame a single route to a unit O-D pair. So, this study has the assumption that does not consider the waiting and transfer time at the bus stop. This system technique consists of the following phases: I) limitation of the road network examined for the study, ii) enumeration of the appropriate candidate routes by the permissive route length, and iii) determination of the optimum bus route by the route evaluation value.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.3
• /
• pp.216-220
• /
• 2013

The rated voltage has been rising in order to minimize the losses in power transmission. The high voltage electric machines should be minimized due to the constraints of space. Therefore, the temperature of high voltage electric apparatuses easily exceeds the temperature limits. In this paper, it is investigated that how to minimize the internal temperature rising of a high voltage switchgear by adjusting the arrangement of bus bars. High voltage switchgears consist of a circuit breaker, a CT, a PT, a earthing switches, bus bars, and so on. It is very difficult to estimate the electromagnetic properties of a high voltage switchgear due to these various environments and structures. In this paper, analyses are focused on the electromagnetic characteristics of bus bars according to the arrangement method and the enclosures to simplify the electromagnetic characteristics of a switchgear. It is found that the characteristics of electric field intensity and electromagnetic losses in bus bars are influenced by the arrangement method of bus bars. However, it is confirmed that the electromagnetic characteristics of enclosures are not affected by the arrangement of bus bars. In this paper, the arrangement methods of bus bars to minimize the electric field intensity and electromagnetic losses are suggested. It is expected that the research results are helpful to design and develop an electrically reliable high voltage switchgear.

• Journal of Korean Society of Transportation
• /
• v.33 no.6
• /
• pp.543-553
• /
• 2015

This study analyzed that the impact of the bus use environment on users' stress in each step of bus use, from accessing to leaving to transfer, in the city of Daejeon. For this, we collected the stress data from 300 users using personal interviews at the bus stops and on-board bus. Also, we used factor analysis and structural equation model method for analysis of the impact of external and internal bus environments on stress of users. The results of this study showed that the highest stress impact factor was an onboard factor(${\beta}=.416$) including 'density and crowding', 'no seat to seat' and 'low ride comfort and safe'. The next stress impact factor was transfer factor including 'insufficient transfer information', 'lack of connectivity of bus and subway' and 'uncomfort transfer route'. From the above, we recommend that bus policies need to focus on not the supplier but users and also, this user based policy need to be more specified considering the characteristics of various users such as females, the elderly, irregular users, and so on.

• Journal of the Korea Convergence Society
• /
• v.12 no.4
• /
• pp.217-228
• /
• 2021

After the integrated fare system has been applied, public transportation and transfer traffic increased. As a result, transfer passengers must be considered in the operation of the bus. Although previous studies have limitations due to utilizing deterministic mathematical models, which fails to reflect the stochastic movements of passengers and buses, in this study, a more realistic bus stop micro-simulation model is proposed. Based on the proposed simulation model, we represent the relationship between bus arrival interval and passenger wait time as a regression model and empirically show the differences between the cases with and without transfer passengers. Also, we propose a method converting passenger waiting time to cost and find optimal bus arrival interval based on the converted cost. It is expected the proposed method enables bottom-up decision making reflecting practical situation.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.3
• /
• pp.181-187
• /
• 2017

Objective: The aim of the study was to compare & analyze on the variations of ground reaction force during ascending and descending of bus stair. Method: Simulated wooden stair of bus (raiser: 37.66 cm, width: 109 cm, tread: 29 cm) and GRF system (AMTI-OR-7/ AMTI., USA) was set up within experimental room. Adult female (n=8) performed ascending & descending of simulated bus stair, and variables analyzed consisted of TT (transfer-time), PVF (peak vertical force), LR (loading rate), DR (decay rate), CV (coefficient of variation) and AI (asymmetry index). Sample data from GRF cut off at 1,000 Hz. Results: TT showed shortest variation at phase 1 during descending, but longest variation at phase 1 during ascending of stair. PVF19 (Fz2, 100%) showed large pattern during descending than that of ascending, but rather showed small pattern during ascending of stair in case of PVF2 (Fz4). LR showed larger pattern during descending than that of ascending, but rather during ascending of stair in case of DR. Variation of CV (%) did not show difference between LR and DR, but showed higher possible occurrence of variation during descending of stair. Also AI (%) showed higher index during ascending than that of descending of stair. Conclusion: Because introduction of lowered bus stair has various realistic problems, if lined up at designated bus stopage exactly, rather can solve problems of inconvenience, reduce impulsive force and secure a stability of COG during ascending & descending of stair.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.3
• /
• pp.343-351
• /
• 2018

Renewable energy sources has drawn considerable attention as clean energy sources because of changing public attitudes regarding greenhouse gas and fine dust. Recently, in this respect, the government provides the drivers of electric vehicles with various benefits such as tax reduction, financial incentives and free parking from the public to the private sector. Plug-in electric vehicles are the most common in the private sector. Otherwise, different types of battery-based buses in the public sector are being developed, and there are three main types of charging: plug-in, battery swapping and wireless. Therefore, economic assessment of charging types in each bus route is required in order to facilitate the use of battery-based buses instead of the existing CNG buses. In this paper, net present value(NPV) and B/C ratio of charging types are evaluated in consideration of the bus schedule, the cost of charging station, and the life cycle of battery, etc. per each bus route. In case study, main bus routes in Daegu City are simulated with the proposed evaluation method to validate the eco-bus project.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1256-1267
• /
• 2016

Distributed stray inductance exerts a significant influence on the turn-off voltages of power switching devices. Therefore, the design of low stray inductance bus bars has become an important part of the design of high-power converters. In this study, we first analyze the operational principle and switching transient of a T-type converter. Then, we obtain the commutation circuit, categorize the stray inductance of the circuit, and study the influence of the different types of stray inductance on the turn-off voltages of switching devices. According to the current distribution of the commutation circuit, as well as the conditions for realizing laminated bus bars, we laminate the bus bar of the converter by integrating the practical structure of a capacitor bank and a power module. As a result, the stray inductance of the bus bar is reduced, and the stray inductance in the commutation circuit of the converter is reduced to more than half. Finally, a 10 kVA experimental prototype of a T-type converter is built to verify the effectiveness of the designed laminated bus bar in restraining the turn-off voltage spike of the switching devices in the converter.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.1
• /
• pp.74-78
• /
• 2015

A bus seat is required to be ergonomically designed in terms of its shape and physical properties to increase seating comfort. The present study is intended to develop a systematic bus seat evaluation protocol based on seating comfort. A total of 48 participants evaluated 12 parts (seat belt, recliner, armrest, headrest, upper-back support, lumbar support, seatback bolster, seatback overall, hip support, thigh support, seatpan bolster, and seatpan overall) of 12 bus seats with 17 subjective comfort measures (e.g., convenience of control, suitability of size, and overall comfort). Lastly, ergonomic features of shape and physical properties of each seat part were identified based on the subject evaluation analysis results. The developed bus seat evaluation protocol can be applied to evaluate various types of seats.