• 제목/요약/키워드: B13

검색결과 7,807건 처리시간 0.037초

부세에 대한 음향반사강도의 체장 의존성 (Fish length dependance of acoustic target strength for large yellow croaker)

  • 강희영;이대재
    • 수산해양기술연구
    • /
    • 제39권3호
    • /
    • pp.239-248
    • /
    • 2003
  • 우리나라 주변해역에 서식하는 주요 어종의 체장식별에 필요한 음향반사강도의 data bank를 구축하기 위한 연구의 일환으로 대형음향수조에서 부세의 체장에 따른 음향반사강도를 측정하고, 그 반사강도의 체장 의존성 및 KRM 산란모텔에 의한 이론 반사강도와 측정치를 비교, 분석한 결과를 요약하면 다음과 같다. 1. 체장의 범위가 21.0-32.5 cm인, 총 13마리의 부세를 대상으로 구한 평균반사강도패턴에서 최대 반사강도는 tilt angle이 -13.35$^{\circ}$ 인 입사방향에서 나타났고, 이 때의 반사강도는 -35.13 ㏈ 이었다. 2. 부세의 체장 (fork length, cm)과 평균반사강도의 사이에는 다음의 회귀직선식이 성립하였다. TS=23. 76log(L) -73.45(r=0.47) TS=20log(L) -67.35이 결과로부터 부세의 반사강도는 체장의 2.376승에 비례하는 경향을 나타내었고, 체장변환계수는 체장의 2승에 근사시켜 구한 값 보다 6.1 ㏈ 더 낮게 나타났다. 이들의 결과는 향후 체장어군탐지기의 체장변환계수의 값으로서 활용될 것으로 판단된다. 3. 평균체장은 25.59 cm인 총 13마리의 부세에 대한 반사강도의 빈도분포로부터 구한 반사강도는 -41.23 ㏈이었고, 이 값으로부터 구한 체장변환계수는 -69.72 ㏈이었다. 4. KRM model에 의한 부세의 이론반사강도는 L/λ 비가 15보다 작은 영역에서는 파동상의 변화를 나타내면서 증가하는 경향을 나타내었고, 15보다 큰 영역에서는 매우 완만하게 증가하는 경향을 나타내었다. 5. 부세의 평균반사강도의 측정치는 KRM 산란모델에 의한 예측치보다 전반적으로 낮은 경향을 나타내었고, 보다 정량적인 분석을 위해서는 광범위한 주파수 범위에 대한 실험이 필요하다고 판단된다.

B Cells Promote Th1- Skewed NKT Cell Response by CD1d-TCR Interaction

  • Shin, Jung Hoon;Park, Se-Ho
    • IMMUNE NETWORK
    • /
    • 제13권5호
    • /
    • pp.218-221
    • /
    • 2013
  • CD1d expressing dendritic cells (DCs) are good glyco-lipid antigen presenting cells for NKT cells. However, resting B cells are very weak stimulators for NKT cells. Although ${\alpha}$-galactosylceramide (${\alpha}$-GalCer) loaded B cells can activate NKT cells, it is not well defined whether B cells interfere NKT cell stimulating activity of DCs. Unexpectedly, we found in this study that B cells can promote Th1-skewed NKT cell response, which means a increased level of IFN-${\gamma}$ by NKT cells, concomitant with a decreased level of IL-4, in the circumstance of co-culture of DCs and B Cells. Remarkably, the response promoted by B cells was dependent on CD1d expression of B cells.

The Synthesis and Characterization of Some Novel Thioethers: Thio-Subsituted [3]Cumulenes, -1-Buten-3-ynes and Buta-1,3-dienes

  • Ibis, Cemil;Sahin, Aysecik
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권8호
    • /
    • pp.2255-2260
    • /
    • 2010
  • In this study, some novel thiosubstituted butenyne (3a-d, 7b, 15b), butadiene (4a-b, 4d, 5a, 5c, 6b, 8e, 9c, 10b, 16b, 18e) and [3]cumulene (11a-b with isomer 3a-b, 12a with isomer 13a, 14b, 17e) compounds were synthesized from the reaction of 2H-pentachloro-1,3-butadiene with thiols. The new compounds were characterized by elemental analysis, mass spectrometry, UV-vis, IR, 1H NMR, NMR ($^{13}C$ or APT) spectroscopy.

시판 건포류에서 B. cereus 관련 균주 분리와 항생제 감수성 (Bacillus spp. & B. cereus Isolated in Dried Marine Products)

  • 함희진;김무상
    • 한국식품위생안전성학회지
    • /
    • 제21권3호
    • /
    • pp.159-163
    • /
    • 2006
  • 건포류 86건에 대한 시험 결과, 37건(43.0%=37/86)에서 Bacillus spp가 18건(20.9%=18/86)에서 B. cereus가 분리되었다. 분리 동정된 37주는 B. cereus 48.6%(18/37), B. mycoides 13.5%(5/37), B. coagulus 5.4%(2/37). B. firmus 5.4%(2/37), B. circulus 2.7%(1/37), B. stearothermophilus 2.7%(1/37), B. pumilus 2.7%(1/37), E. spp. 8.1%(3/37), 그리고 Brebacillus brevis 10.8%(4/37) 등으로 나타나 식중독균의 일종인 B. cereus가 가장 많이 나타나 주의를 요할 것으로 사료된다.

R452B 냉매 적용 물대물 지열원 히트펌프 유닛의 냉난방 운전 성능 특성 (Heating and Cooling Performance Characteristics of a Water-to-Water Heat Pump with R452B Refrigerant)

  • 최연성;강희정;김은오
    • 한국지열·수열에너지학회논문집
    • /
    • 제13권4호
    • /
    • pp.14-20
    • /
    • 2017
  • Refrigerant having high global warming potentials will be phased out due to environmental protection issues. R410A has been widely used in geothermal heat pump. However, it has a little high GWP by 2088 value. One of the recommended substitute for R410A refrigerant is R452B which having a GWP by 698 value. In this paper, the heating and cooling performance of the water-to-water geothermal heat pump unit with R452B was experimentally investigated. The performance of the heat pump adopting R452B was also compared with the system applying R410A. The heating and cooling capacity of R452B heat pump system showed a slightly lower values within 2% comparing with R410A system. However, the R452B system's coefficient of performance was enhanced by 5.2% and 13.7% at heating and cooling mode, respectively.

Fe-P-C-B-Al-Mo계 비정질합금의 열적.화학적 성질에 미치는 P 및 Mo의 영향 (The Effect of P and Mo for Thermal and Chemical Properties of Fe-PC-B-Al-Mo Amorphous Alloys)

  • 국진선;전우용
    • 열처리공학회지
    • /
    • 제15권2호
    • /
    • pp.76-81
    • /
    • 2002
  • The melt-spun amorphous $Fe_{77-X}P_{13}C_4B_4Al_2Mo_X$(x=4~10) and $Fe_{82-X}P_XC_4B_4Al_2Mo_8$(x=9~15) alloys were found to exhibit a large supercooled liquid region(${\Delta}T_x$) exceeding 40 K before crystallization. The largest ${\Delta}T_x$ for the glassy alloys containing Mo reaches as large as 65 K for the $Fe_{69}P_{13}C_4B_4Al_2Mo_8$ alloy. The corrosion behavior of the amorphous $Fe_{77-X}P_{13}C_4B_4Al_2Mo_X$(x=4~15) and $Fe_(82-X)P_XC_4B_4Al_2Mo_8$ (x=9~17) alloys were examined by electrochemical measurements in 9M $H_2SO_4$ solution at 303 K. The addition of Mo(or P) for replacing some portion of Fe is effective in improving the corrosion resistance of the investigated Fe-based glassy alloys. They are spontaneously passivated and have a wide passive region with low passive current density.

높은 정확도의 3차원 대칭 커패시터를 가진 보정기법을 사용하지 않는 14비트 70MS/s 0.13um CMOS 파이프라인 A/D 변환기 (A Calibration-Free 14b 70MS/s 0.13um CMOS Pipeline A/D Converter with High-Matching 3-D Symmetric Capacitors)

  • 문경준;이경훈;이승훈
    • 대한전자공학회논문지SD
    • /
    • 제43권12호
    • /
    • pp.55-64
    • /
    • 2006
  • 본 설계에서는 무선 랜 등 최첨단 무선 통신 및 고급영상 처리 시스템과 같이 고해상도와 높은 신호처리속도, 저전력 및 소면적을 동시에 요구하는 고성능 집적시스템 응용을 위해 기존의 보정기법을 사용하지 않는 14b 70MS/s 0.13um CMOS A/D 변환기(Analog-to-Digital Converts- ADC)를 제안한다. 제안하는 がU는 중요한 커패시터 열에 인접신호에 덜 민감한 3차원 완전 대칭 구조의 레이아웃 기법으로 소자 부정합에 의한 영향을 최소화하였고, 3단 파이프라인 구조로 고해상도와 높은 신호처리속도와 함께 전력 소모 및 면적을 최적화하였다. 입력 단 SHA 회로에는 Nyquist 입력에서도 14비트 이상의 정확도로 신호를 샘플링하기 위해 게이트-부트스트래핑 (gate-bootstrapping) 회로를 적용함과 동시에 트랜스컨덕턴스 비율을 적절히 조정한 2단 증폭기를 사용하여 14비트에 필요한 높은 DC전압 이득을 얻음과 동시에 충분한 위상 여유를 갖도록 하였으며, 최종 단 6b flash ADC에는 6비트 정확도 구현을 위해 2단 오픈-루프 오프셋 샘플링 기법을 적용하였으며, 기준 전류 및 전압 발생기는 온-칩으로 집적하여 잡음을 최소화하면서 필요시 선택적으로 다른 크기의 기준 전압 값을 외부에서 인가할 수 있도록 하였다. 제안하는 시제품 ADC는 0.13um CMOS 공정으로 요구되는 2.5V 전원 전압 인가를 위해 최소 채널길이는 0.35um를 사용하여 제작되었으며, 측정된 DNL 및 INL은 14비트 해상도에서 각각 0.65LSB, 1.80LSB의 수준을 보이며, 70MS/s의 샘플링 속도에서 최대 SNDR 및 SFDR은 각각 66dB, 81dB를 보여준다. 시제품 ADC의 칩 면적은 $3.3mm^2$이며 전력 소모는 2.5V 전원 전압에서 235mW이다.

In-line Variable Optical Attenuator Based on the Bending of the Tapered Single Mode Fiber

  • Kim, Kwang-Taek;Kang, Ji-Hoon;HwangBo, Seung;Im, Kie-Gon
    • Journal of the Optical Society of Korea
    • /
    • 제13권3호
    • /
    • pp.349-353
    • /
    • 2009
  • We propose a simple in-line variable optical attenuator (VOA) based on the bending effect of tapered single mode fibers. The influence of the taper structure and the reflective index of the external medium surrounding the taper region on the bending loss of the tapered fiber have been investigated experimentally. An attenuation range exceeding 35 dB and a very low excess loss of < 0.2 dB at 1550 nm were achieved. The measured polarization dependent loss of the present VOA at the attenuation level of 10 dB, 20 dB, and 30 dB were 0.1 dB, 0.2 dB, and 0.5 dB, respectively.