• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.683-686
• /
• 1988

In the recognition of similar patterns like profile contours of human faces, feature measure plays important role. We extracted effective and general feature by B-spline approximation. The nodes and vertices of the approximated curve are normalized and used as features. Since the features have both local property of curvature extrema and global property by B-spline approximation, they are superior to those of curvature extrema of the profile contour. For the image data of six sets of 56 persons, some of which are ill-made, averaged accuracy rate of 97.6 % is obtained in recognizing combinational 333 test samples.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.331-334
• /
• 2003

In this paper, using B-splines as universial approximators, we have obtained a plant parametrization which permits the construction of an adaptive observer. The particular property of this parametrization is that the dynamic order of the filters in this design does not depend on the number of parameters in the plant parametrization. This appears to be a beneficial property especially because the number of such parameters tends to be very high for universial approximator based designs.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.70-77
• /
• 2002

Since our physical world cannot be modeled as rigid body, deformable object models are important. For real-time simulation of elastic object, it must be guaranteed by its exact solution and low-latency computational cost. In this paper, we describe the boundary integral equation formulation of linear elastic body and related boundary element method(BEM). The deformation of elastic body can be effectively solved with 1ow run-time computational costs, using precomputed Green Function and fast low-rank updates based on Capacitance Matrix Algorithm.

• The Korean Journal of Applied Statistics
• /
• v.4 no.2
• /
• pp.171-178
• /
• 1991

For the polynomial spline regression with fixed knots, some properties of the D-optimal design are discussed. Also the D-optimal design for some cases are found analytically by using a normalized B-spline basis for $S(P_m : k : \Delta)$. Based on the Kiefer-Wolfowitz equivalence theorem, the D-optimal design for some cases are found by numerical methods.

• International Journal of Contents
• /
• v.3 no.4
• /
• pp.26-29
• /
• 2007

The paper is devoted to problem of spline approximation. A new method of nodes location for curves and surfaces computer construction in multidimensional spaces by means of B-splines is presented. The criteria are which links a square-mean error caused by high frequency spline distortions and approximation intervals is determined and necessary theorem is proved. In this method use a theory of entire multidimensional spectra and may be extended for the spaces of three, four and more variables. Future work: application area such as digital contents like animation, game graphic.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.403-406
• /
• 2006

Internal spline forming using a thin and long tube can cause the buckling and folding during the forming process. In the study, we proposed two different extrusion processes, and we performed the analysis in order to obtain the optimal process according to the length of land part. Using the rigid-plastic finite element simulation, the proposed processes have been compared by checking the deformed shape and stroke-road relation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.206-211
• /
• 1996

Closed-die forging of external spine is analysed using an upper bound elemental technique. The kinematically admissible velocity field for three-dimensional deformation in forging of the external spine with trapezoidal teeth was obtained. The upper bound to the deforming load necessary and the the deformed configurations are predicted using integration of the formulation of energy expressions which were obtained from B(upset forging method) were considerd in the present analysis and the theoretical results compared with experimental ones Experiments were carried out on plasticine as model material at room temperature where talcum powder was used as a lubricant. The present investigation revealed that the analytical method B predicts a reducet forging load and improved configuration better than method A for the forged products.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.17 no.3
• /
• pp.171-179
• /
• 2013

In this paper we present a method of circular arc approximation by quartic B$\acute{e}$zier curve. Our quartic approximation method has a smaller error than previous quartic approximation methods due to the alternation of the error function of our quartic approximation. Our method yields a closed form of error so that subdivision algorithm is available, and curvature-continuous quartic spline under the subdivision of circular arc with equal-length until error is less than tolerance. We illustrate our method by some numerical examples.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.7
• /
• pp.99-106
• /
• 1996

Estimation and removal procedures for baseline drift have been developed using linear, cubic spline, and bilineared transformed high pass filter. Linear and cubic spline interpolation with the PQ and TP segmens, which are considered to be isoelectric, as fiducial points ahve been estimated respectively. For a quantitative validation of the estimation procedure, 4 ECGs with arfificial baseline drift were constructed and analyzed by mean square error calculations and amplitude histograms. Also real ECGs were analyzed in a test set of the CSE data set 3 and set 4. Baseline drift detecton rule were designed and new method for the decision of fiducial point were constructed to avoid distorting as the case of premature ventricular or atrial contraction. From these comparison, proposed cubic spline method with PQ and TP segment (CS_PQ & TP) emerged as the most efficient method.

• Transactions of Materials Processing
• /
• v.19 no.2
• /
• pp.132-137
• /
• 2010

In the multi-pass shape drawing process, the appropriate process design is very important to produce sound products. The reduction ratio, die angle, and the intermediate die shape are very important process variable of the multi-pass shape drawing. The aim of this study is the determination of the reduction ratio, die angle, and the intermediate die shape of the 2 pass shape drawing process for producing steering spline shaft. In this study, FE analysis, Taguchi method, and ANN(artificial neural network) were applied to determine the appropriate reduction ratio, die angle, and intermediate die shape. After the determination of the process variables, FE analysis and drawing experiment were performed to evaluate the effectiveness of the determined process variables. The dimensional accuracy of the final drawn spline shaft was evaluated by using 3D surface profiler and 3D laser digitizing system.