• 제목/요약/키워드: Asynchronous Transmission

검색결과 151건 처리시간 0.024초

다중 패킷을 전송하는 네트워크 제어시스템의 안정성 분석 (Stability Analysis of a Networked Control System with Multiple Packet Transmission)

  • 정준홍;박기헌;이재호
    • 전자공학회논문지SC
    • /
    • 제44권5호
    • /
    • pp.18-29
    • /
    • 2007
  • 본 논문에서는 다중 패킷을 전송하는 네트워크 제어시스템을 대상으로, 전체 시스템의 안정성 변화를 분석할 수 있는 새로운 방법을 제안하였다. 먼저, 메시지의 최대 시간 지연을 보장할 수 있는 스케쥴링 방식과 데이터 손실을 나타낼 수 있는 이산 스위치 상태방정식을 새롭게 제시하였으며, 이를 이용하여 네트워크 제어시스템과 등가인 비동기 시스템(asynchronous dynamical system)을 유도하였다. 이후, 제어기의 샘플링 주기, 시간 지연, 데이터 전송 성공률, 전송 패킷의 개수에 따라 변화하는 네트워크 제어시스템의 안정성을 판별할 수 있도록 새로운 정리들을 제안하였다. 마지막으로, Batch Reactor 시스템을 대상으로 제안한 정리들을 적용하여 시뮬레이션하고 그 결과를 분석함으로써 본 논문에서 제안한 안정성 분석 방법의 타당성을 입증하였다.

무선 ATM셀 전송을 위한 부분 연쇄 부호화 기법의 성능분석 (Performances of wireless ATM cell transmission with partial concatenated coding)

  • 이진호;김태중;이동도;안재영;황금찬
    • 한국통신학회논문지
    • /
    • 제22권9호
    • /
    • pp.2014-2026
    • /
    • 1997
  • 본 논문에서는 현재 광대역 고속네트워킹의 핵심기술인 비동기 전송방식(Asynchronous Transfer Mode: ATM)을 사용하는 통신 네트워크에서 무선채널을 이용하여 ATM 셀을 전송할 때에 비트오율 성능, 셀손실확률, 셀오류확률 및 네트워크 성능을 분석하였다. 무선 채널에서의 변조방식으로는 대역폭 효율을 높히기 위하여 16Star QAM방식을 적용하였으며, 무선 채널에서의 성능을 개선하기 위한 채널부호화 기법으로는 Reed-Solomon (R-S)부호, 길쌈부호, R-S/길쌈부호의 인쇄부호를 적용하였으며, 효과적으로 ATM셀을 전송하기 위한 UEP(unequal error protection) 부호화 방안으로 부분 연쇄부호를 제시하고 성능을 분석하였다. 이동 무선 통신채널의 특성인 도플러 영향과 라이시안 페이딩 모델을 고려하였고 수신단에서의 성능을 향상시키기 위하여 최대비 결합 방식의 다이버시티 기법을 적용하였으며, 네트워크 성능분석을 위하여는 무선 ATM셀의 셀 전송효율 및 지연시간을 분석하였다. 성능분석 결과로, 부분 연쇄부호를 적용시 기존의 부호화 기법들에 비하여 약 2dB 이상의 ATM 셀 손실 성능 향상을 기대할 수 있으며, 특별히 낮은 오류확률을 요구할 수록 좋은 성능을 보임을 알 수 있었다. 또한 동일한 성능을 얻기 위하여 적용하는 부호화 기법의 오버헤드 비트를 줄일 수 있는 방안임을 확인하였다. 따라서, 부분연쇄부호와 같이 ATM 셀의 헤더와 payload 부분의 에러 보정능력을 달리 적용하는 부호화 기법을 채택하는 것이 미래의 이동통신망에서의 무선 ATM통신을 위한 유용한 전송방식으로 생각된다.

  • PDF

Wire Optimization and Delay Reduction for High-Performance on-Chip Interconnection in GALS Systems

  • Oh, Myeong-Hoon;Kim, Young Woo;Kim, Hag Young;Kim, Young-Kyun;Kim, Jin-Sung
    • ETRI Journal
    • /
    • 제39권4호
    • /
    • pp.582-591
    • /
    • 2017
  • To address the wire complexity problem in large-scale globally asynchronous, locally synchronous systems, a current-mode ternary encoding scheme was devised for a two-phase asynchronous protocol. However, for data transmission through a very long wire, few studies have been conducted on reducing the long propagation delay in current-mode circuits. Hence, this paper proposes a current steering logic (CSL) that is able to minimize the long delay for the devised current-mode ternary encoding scheme. The CSL creates pulse signals that charge or discharge the output signal in advance for a short period of time, and as a result, helps prevent a slack in the current signals. The encoder and decoder circuits employing the CSL are implemented using $0.25-{\mu}m$ CMOS technology. The results of an HSPICE simulation show that the normal and optimal mode operations of the CSL achieve a delay reduction of 11.8% and 28.1%, respectively, when compared to the original scheme for a 10-mm wire. They also reduce the power-delay product by 9.6% and 22.5%, respectively, at a data rate of 100 Mb/s for the same wire length.

단대단 비동기 암호통신에서 효율적인 전송을 위한 데이터 변환방법 (Data Conversion Schemes for Efficient Transmission on End-to End Asynchronous Secure Communication)

  • 정현철
    • 한국정보처리학회논문지
    • /
    • 제3권7호
    • /
    • pp.1834-1844
    • /
    • 1996
  • 비동기 통신에서는 특정 영역의 데이터가 각종 제어문자로 사용된다. 그러므로 데이터를 송신할 때 이 영역의 데이터는 제어문자로의 오인을 방지하기 위하여 다른 문자로 변환하고 이를 제어접두문자와 함께 전송하여야 한다. 본 논문에서는 비동기 프로토콜 상으로 데이터를 암호화하여 전송할 때 발생하는 모의 제어문자에 대해 제어 접두문자를 추가하지 않고 일정한 변환만 하여 송신하므로써 데이터의 길어짐을 방지 하고 전체 통신속도를 높이는 문자 변환 방법을 몇 가지 제시하였다. 이러한 변환을 위해 전송 데이터의 유효 범위를 가정하고 이 범위를 벗어나지 않도록 하였으며, 실험을 통하여 이 방법이 기존의 방법에 비해 통신속도 가 향상됨을 보이고 암호화된 데이터의 임의성을 확인하므로써 암호화에 문제가 없음을 보였다.

  • PDF

MOST 네트워크에서 비동기 데이터 전송의 신뢰성 향상 알고리즘 구현 (The Implementation of Improved Reliability Algorithm for Asynchronous Data Transmission in MOST Network)

  • 김창영;박유현;전영준;유윤식
    • 한국정보통신학회논문지
    • /
    • 제16권12호
    • /
    • pp.2635-2642
    • /
    • 2012
  • MOST(Media Oriented Systems Transports)Network는 차량용 멀티미디어 기기를 위한 통신 프로토콜로서 높은 대역폭과 신뢰성을 보장하는 차량용 네트워크이다. 그러나 기존의 MOST 디바이스는 데이터 제어나 전송을 위해 내부 버스 통신방식인 I2C나 I2S통신 방식만을 사용하여 왔으나, MOST 네트워크의 대역폭이 늘어나고 하나의 디바이스 내에 여러 장치들이 추가되면서 더 넓은 대역폭의 통신방식이 필요하게 되었다. 따라서 본 연구에서는 MediaLB 통신을 사용하여 비동기 데이터 전송 시 효율성 향상 방법을 제시하고, MOST 네트워크에서 비동기 데이터 전송 시에 발생할 수 있는 데이터 신뢰성 문제를 해결하기 위하여 비동기 데이터 영역의 데이터 형태를 개선하여 전송 데이터의 신뢰성을 향상할 수 있는 알고리즘을 제안하고자 한다.

실시간 제어 데이터통신을 위한 IEEE-1394용 수정 TCP/IP의 성능분석 (Performance Analysis of Modified TCP/IP for Realtime Control Data Transmission over IEEE-1394 Network)

  • 윤기중;박재현;염복진
    • 제어로봇시스템학회논문지
    • /
    • 제10권2호
    • /
    • pp.197-203
    • /
    • 2004
  • A real-time network in a distributed control system plays an important role for the reliable data transmission. Compared to the field-buses used in the past, TCP/IP protocol on the top of Ethered provides a compatibility between applications as well as an economical method to develop softwares. This paper proposes a modified TCP/IP structure for IEEE-1394 network, with which asynchronous and isochronous data transmission is selectively used for the real-time data transmission in a distributed control system. This paper also shows the performance of the proposed protocol by experiments.

하이브리드 터너리 데이터 인코딩 기반의 비동기식 시스템 버스 래퍼 설계 (Design of Asynchronous System Bus Wrappers based on a Hybrid Ternary Data Encoding Scheme)

  • 임영일;이제훈;이승숙;조경록
    • 대한전자공학회논문지SD
    • /
    • 제44권1호
    • /
    • pp.36-44
    • /
    • 2007
  • 본 논문은 Delay-Insensitive(DI) 지연 모델을 갖는 비동기식 회로에 3치 전압 레벨을 사용한 하이브리드 터너리 데이터 전송 방식을 제안하고, 이를 이용하여 다양한 비동기 프로토콜과의 데이터 송신 및 수신을 위한 래퍼를 설계하였다. 제안된 하이브리드 터너리 데이터 전송 방식은 기존의 2 선식 전송 방식이나 1-of-4 전송 방식에 비해 데이터 전송선을 50% 줄일 수 있으며, 터너리 전송 방식과 비교하였을 때도 50%의 신호 천이 감소 결과를 보였다. 본 논문에서는 $0.18-{\mu}m$ CMOS 공정을 적용하여 래퍼를 설계하고 검증하였다. 하이브리드 터너리 전송 방식이 적용된 래퍼는 2 GHz 이상의 속도로 동작 하였으며 2 선식, 1-of-4, 그리고 터너리 전송 방식에 비해 각각 65%, 43%, 36%의 소비 전력이 줄어든 결과를 보였다. 제안된 전송 방식과 설계된 래퍼 회로는 비동기식 고속 및 저전력 인터페이스로 사용 가능하다.

Performance Evaluation of the RIX-MAC Protocol for Wireless Sensor Networks

  • Kim, Taekon;Lee, Hyungkeun
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제11권2호
    • /
    • pp.764-784
    • /
    • 2017
  • Energy efficiency is an essential requirement in designing a MAC protocol for wireless sensor networks (WSNs) using battery-operated sensor nodes. We proposed a new receiver-initiated MAC protocol, RIX-MAC, based on the X-MAX protocol with asynchronous duty cycles. In this paper, we analyzed the performance of RIX-MAC protocol in terms of throughput, delay, and energy consumption using the model. For modeling the protocol, we used the Markov chain model, derived the transmission and state probabilities, and obtained the equations to solve the performance of throughput, delay, and energy consumption. Our proposed model and analysis are validated by comparing numerical results obtained from the model, with simulation results using NS-2.

비동기 전력계통 연계를 위한 Back-To-Back 직류설비의 운전특성 해석 (Analysis of Back-to-Back HVDC system featured for Asynchronous Connection)

  • 곽주식;우정욱;고봉언;김찬기;심응보
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 B
    • /
    • pp.1289-1291
    • /
    • 2000
  • The operation of Back-To-Back HVDC system for asynchronous connection is described. It can exchange electric power up to 300 MW between separately operated two rower systems, making the interaction on each system minimum. The analysis is done under three different AC transmission lines interconnected to BTB HVDC.

  • PDF

Effects of Array Weight Errors on Parallel Interferene Cancellation Receiver in Uplink Synchronous and Asynchronous DS-CDMA Systems

  • Kim, Yong-Seok;Hwang, Seung-Hoon;Whang, Keum-Chan
    • ETRI Journal
    • /
    • 제26권5호
    • /
    • pp.413-422
    • /
    • 2004
  • This paper investigates the impacts of array weight errors (AWE) in an antenna array (AA) on a parallel interference cancellation (PIC) receiver in uplink synchronous and asynchronous direct sequence code division multiple access (DS-CDMA) systems. The performance degradation due to an AWE, which is approximated by a Gaussian distributed random variable, is estimated as a function of the variance of the AWE. Theoretical analysis, confirmed by simulation, demonstrates the tradeoffs encountered between system parameters such as the number of antennas and the variance of the AWE in terms of the achievable average bit error rate and the user capacity. Numerical results show that the performance of the PIC with the AA in the DS-CDMA uplink is sensitive to the AWE. However, either a larger number of antennas or uplink synchronous transmissions have the potential of reducing the overall sensitivity, and thus improving its performance.

  • PDF