• ETRI Journal
• /
• v.35 no.3
• /
• pp.480-490
• /
• 2013

As technology evolves into the deep submicron level, synchronous circuit designs based on a single global clock have incurred problems in such areas as timing closure and power consumption. An asynchronous circuit design methodology is one of the strong candidates to solve such problems. To verify the feasibility and efficiency of a large-scale asynchronous circuit, we design a fully clockless 32-bit processor. We model the processor using an asynchronous HDL and synthesize it using a tool specialized for asynchronous circuits with a top-down design approach. In this paper, two microarchitectures, basic and enhanced, are explored. The results from a pre-layout simulation utilizing 0.13-${\mu}m$ CMOS technology show that the performance and power consumption of the enhanced microarchitecture are respectively improved by 109% and 30% with respect to the basic architecture. Furthermore, the measured power efficiency is about 238 ${\mu}W$/MHz and is comparable to that of a synchronous counterpart.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3152-3159
• /
• 2012

This paper presents the new instruction-level power model for an asynchronous processor. Until now, the various power models for estimating the power dissipation of embedded processor in SoC are proposed. Since all of them are target to the synchronous processors, the accuracy is questionable when we apply those power models to the asynchronous processor in SoC. To solve this problem, we present new power model for an asynchronous processor by reflecting the behavioral features of an asynchronous circuit. The proposed power model is verified using an implementation of asynchronous processor, A8051. The simulation results of the proposed model is compared with the measurement result of gate-level synthesized A8051. The proposed power model shows the accuracy of 90.7% and the simulation time for estimation the power consumption was reduced to 1,900 times.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.414-416
• /
• 2000

We investigate potential advantages and problems when a superscalar processor is designed and implemented using asynchronous design methods. Conventional techniques of superscalar processing are applied and data dependent adder is considered as an asynchronous component. Intensive simulations on SPEC INT95 benchmark suites are made for the purpose of performance comparison between a synchronous and an asynchronous superscalar processor, respectively. The simulation results show about 5% speedup with asynchronous design methods in the sense of Issue Rate.

• The Journal of the Korea Contents Association
• /
• v.12 no.7
• /
• pp.11-20
• /
• 2012

This paper presents new instruction-level power model for an asynchronous processor, A8051. Even though the proposed model estimates power consumption as instruction level, this model reflects the behavioral features of asynchronous pipeline during the program is executed. Thus, it can effectively enhance the accuracy of power model for an asynchronous embedded processor without significant complexity of power model as well as the increase of simulation time. The proposed power model is based on the implementation of A8051 to reflect the characteristics of power consumption in A8051. The simulation results of the proposed model is compared with that of gate-level synthesized A8051. The proposed power model shows the accuracy of 94% and the simulation time for estimation the power consumption was reduced to 1,600 times.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.451-453
• /
• 2007

This paper describes the design of an asynchronous implementation of a sensor network processor. The main purpose of this work is the reduction of power consumption in sensor network node processors and the research presented here tries to explore the suitability of asynchronous circuits for this purpose. The Handshake Solutions toolkit is used to implement an asynchronous version of a sensor processor. The design is made compact, trading area and leakage power savings with dynamic power costs, targeting the typical sparse operating characteristics of sensor node processors. It is then compared with a synchronous version of the same processor. Both versions are then compared with existing commercial processors in terms of power consumption.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.72-79
• /
• 2010

In this paper, we propose the data cache architecture with a write buffer for a 32bit asynchronous embedded processor. The data cache consists of CAM and data memory. It accelerates data up lood cycle between the processor and the main memory that improves processor performance. The proposed data cache has 8 KB cache memory. The cache uses the 4-way set associative mapping with line size of 4 words (16 bytes) and pseudo LRU replacement algorithm for data replacement in the memory. Dirty register and write buffer is used for write policy of the cache. The designed data cache is synthesized to a gate level design using $0.13-{\mu}m$ process. Its average hit rate is 94%. And the system performance has been improved by 46.53%. The proposed data cache with write buffer is very suitable for a 32-bit asynchronous processor.

• The KIPS Transactions:PartA
• /
• v.8A no.4
• /
• pp.439-446
• /
• 2001

The main stream of parallel programming today is using synchronous algorithms, where processor synchronization for correct computation and workload balance are essential. Overall performance of the whole system is dependent upon the performance of the slowest processor, if workload is not well-balanced or heterogeneous clusters are used. Asynchronous iteration is a way to mitigate such problems, but most of the works done so far are for shared memory systems. In this paper, we suggest and implement a parallel large sparse linear system solver that improves performance on distributed memory systems like clusters by reducing processor idle times as much as possible by asynchronous iterations.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.1
• /
• pp.51-58
• /
• 2007

This paper presented an adaptive pipeline architecture for a high-performance and low-power asynchronous processor. The proposed pipeline architecture employed a stage-skipping and a stage-combining scheme. The stage-skipping scheme can skip the operation of a bubble stage that is not used pipeline stage in an instruction execution. In the stage-combining scheme, two consecutive stages can be joined to form one stage if the latter stage is empty. The proposed pipeline architecture could reduce the processing time and power consumption. The proposed architecture supports multi-processing in the EX stage that executes parallel 4 instructions. We designed an asynchronous microprocessor to estimate the efficiency of the proposed pipeline architecture that was synthesized to a gate level design using a $0.35-{\mu}m$ CMOS standard cell library. We evaluated the performance of the target processor using SPEC2000 benchmark programs. The proposed architecture showed about 2.3 times higher speed than the asynchronous counterpart, AMULET3i. As a result, the proposed pipeline schemes and architecture can be used for asynchronous high-speed processor design

• Journal of applied mathematics & informatics
• /
• v.7 no.3
• /
• pp.1045-1058
• /
• 2000

In usual synchronous parallel computing, workload balance is a crucial factor to reduce idle times of some processors that have finished their jobs earlier than others. However, it is difficult to achieve on a heterogeneous workstation clusters where the available computing power of each processor is unpredictable. As a way to overcome such a problem, the idea of asynchronous methods has grown out and is being increasingly used and studied, but there is none for eigenvalue problems yet. In this paper, we suggest a new asynchronous method to solve some singular matrix problems, that can also be used for finding a certain eigenvector of some matrices.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.664-665
• /
• 2013

This paper present a method of constructing the multimedia processor architecture. The proposed multimedia processor architecture be able to handle each text, sound, and video in one chip. Also it have interactive function that is a characteristics of multimedia. Specially, the proposed multimedia processor be able to addressing nodes in memory map without software, and it is completely reconfigurable depend on data. Also it as able to process time and space common that have synchronous/asynchronous and it is able to protect continuous and dynamic media bus collision, and local and overall common memory structure. The proposed multimedia processor architecture apply to virtual reality and mixed reality.