• 대한조선학회논문집
• /
• 제54권1호
• /
• pp.57-62
• /
• 2017

These days, shipbuilding companies are making an effort to adopt the IT technology in order to improve the production efficiency. One such effort is to utilize a planning and scheduling system to predict the production cost in advance. In this system, assessing the welding material quantity is an important factor. Unfortunately, obtaining the welding material quantity in the early design stage is extremely difficult because the detailed production information, which is essential in deriving the cost associated with welding, is normally available at a later stage. This paper aims at developing a computerized program that produces an index to estimate the welding material quantity in the early design stage. By using only three-dimensional geometric information, the program analyzes the production process and estimates the welding material quantity at any design or production stage when no production information is available. The results can be used for the planning and scheduling system.

• 한국국방경영분석학회지
• /
• 제16권1호
• /
• pp.18-34
• /
• 1990

In light of the recent developments of transitory nature, it is likely that national defense decision-making will be more difficult to make for years to come. In other words, sudden changes in security environment would call into question the basic assumptions on which we have built our national defense planning and increase the number of the uncertain factors in the decision-making process; the subdivision and ramification of national defense management would increase the factors for decision-making and complicate even further the mutual interactions among these factors; the accelerated pace of sophistication and diversification of weapon systems and military technology would increase the risk of failure and system costs geometrically; and the reduced level of acceptance among the people on the sanctification of national defense in proportion to the rapid progress toward a more democratic and industrial society would engender an increased criticism or checking role by the National Assembly or by the mass media. As the changes in national defense environment and conditions create an innumerable number of new tasks, this paper intends to suggest a few core policy measures to improve the quality of national defense decision-making. More specifically, it proposes to 1) eradicate entirely the bureaucratic behavior and tendencies; 2) utilize actively the brain staff for quality assurance of decision-making; 3) and introduce and apply as a whole set, a total system, or an incorporated pack age the PPBEES(Planning-Programming-Budgeting-Executing-Evaluating-System)/LCMM (Life-Cycle Management Model for System Acquision), the OR/SA(Operations Research/Systems Analysis), and DMIS (Defense Management Information System).

• 대한조선학회논문집
• /
• 제29권1호
• /
• pp.173-190
• /
• 1992

해양구조물(Offshore Platform)은 우리나라 조선소에서도 1976년이후 꾸준히 시공되어져 왔으나, 이미 체계화되어 있는 선박 건조와는 달리 이 분야에 대한 정보와 연구가 적어, 노동생산성 향상을 위한 자원계획과 일정계획 등 생산계획 기법의 개발이 필요하다. 본 연구에서는 해양구조물 건조과정중 모듈조립에 대한 효율적인 생산계획법을 제안하였다. 모듈은 해양구조물의 상부구조에 속하며 바다에서 설치할 때 해상 크레인의 용량제한 때문에 상부구조를 몇 개로 나눈 것이며, 성냥갑 모양이다. 모듈조립에는 구조, 의장, 도장 등 여러 직종의 작업이 동시에 이루어 져야 하고, 작업들이 상호연계되어 있어서 이 들 직종간의 간섭이 있고 한 직종의 작업지연으로 다른 직종의 작업지연을 유발시켜 공정의 흐름이 정체되어 전체공기가 지연되는 사례가 허다하다. 결국 초기의 부적합한 인원투입으로 공사의 말기에 잔업, 철야, 외주 등 집중 인원투입으로 출혈 공기만회에 임하게 된다. 이런 현상은 원천적으로 초기 생산계획시 호환성이 없는 여러 직종의 인원을 동일한 작업자로 간주하고 계획수립을 하는데 기인한다. 모듈조립 공사에 대하여 소요 인력(Manpower)에 대한 표준모델을 설정하여, 직종별 자원분배의 평준화로 최적의 인력을 투입할 수 있는 생산계획법을 제안하고, 일정 기간에 24개의 프로젝트 즉, 72개의 모듈을 처리하는 실제의 예에 대한 생산계획 시스템을 전산화하여 시험함으로써 실용성을 검증하였다. 시험결과 한 프로젝트에 대한 1)공기면에서 18개월에서 16개월로 2개월(11%) 단축, 2)투입인원면에서 총투입 300명에서 208명으로 92명(31%)절감 등을 예상할 수 있었다.

• 산업경영시스템학회지
• /
• 제39권1호
• /
• pp.153-161
• /
• 2016

Semiconductor manufacturing has suffered from the complex process behavior of the technology oriented control in the production line. While the technological processes are in charge of the quality and the yield of the product, the operational management is also critical for the productivity of the manufacturing line. The fabrication line in the semiconductor manufacturing is considered as the most complex part because of various kinds of the equipment, re-entrant process routing and various product devices. The efficiency and the productivity of the fabrication line may give a significant impact on the subsequent processes such as the probe line, the assembly line and final test line. In the management of the re-entrant process such as semiconductor fabrication, it is important to keep balanced fabrication line. The Performance measures in the fabrication line are throughput, cycle time, inventory, shortage, etc. In the fabrication, throughput and cycle time are the conflicting performance measures. It is very difficult to achieve two conflicting goal simultaneously in the manufacturing line. The capacity of equipment is important factor in the production planning and scheduling. The production planning consideration of capacity can make the scheduling more realistic. In this paper, an input and scheduling rule are to achieve the balanced operation in semiconductor fabrication line through equipment capacity and workload are proposed and evaluated. New backward projection and scheduling rule consideration of facility capacity are suggested. Scheduling wafers on the appropriate facilities are controlled by available capacity, which are determined by the workload in terms of the meet the production target.

• 대한기계학회논문집A
• /
• 제36권3호
• /
• pp.347-353
• /
• 2012

최근 휴대폰은 스마트폰의 출연으로 다기능화가 요구되고 있으며, 각 보드의 전기적 신호를 연결시키는 커넥터는 필수 핵심 부품이 되었다. 커넥터는 많은 양의 전기신호를 처리하기 때문에 소형화, 협피치화가 필요하다. 하지만, 커넥터의 소형화 및 협피치화는 구조적 안전성을 저하시키며, 외부하중에 의한 접촉불량을 발생시킨다. 따라서 본 논문에서는 초소형 협피치 FPC 커넥터를 개발하기 위해 벤치마킹을 통한 초기설계안을 도출하였으며, 터미널 두께 0.2mm, 개수 50 개를 기준으로 하였다. 체결성능을 평가하기 위해 수치해석 모델을 구성하였으며, 다구찌 방법을 이용하여 형상 최적화를 수행하였다. 또한, 터미널의 한계수명을 예측하기 위해 피로해석을 수행하였으며, 체결 성능이 향상된 최종형상을 도출하였다.

• 대한조선학회논문집
• /
• 제31권1호
• /
• pp.42-49
• /
• 1994

조선 CIM 시스템은 제품 모델을 중심으로 한 정보의 통합화를 중점적으로 추구하여야 하므로, 이 제품 모델을 기능 모델과 형상 모델로 구분하였다. 조선을 위한 제품 모델의 근간이 되는 형상 모델을 오일러 조작을 기초로 하는 비다양체 모델의 자료 구조를 이용하여 각각 구획 배치, 구조 설계 및 공정 계획의 입장에서 이용하는 방법에 대하여 연구하였다.

• 한국실내디자인학회논문집
• /
• 제16호
• /
• pp.153-160
• /
• 1998

The past and present time are consistent thinking process system which composed of single concept not separated concept. It's common concept for interior designer to how to realize the thinking process system in actual present day. So this paper was focused on purpose of establishing for procedural process theory by approaching typological process system in interior design process. Interior design being composed of typological thinking process system has been headed as a critical issue to how to transplant well between the design and typological objects. Also we have to be needed to know for the process of visual expression and verbal ability to be able to extract the designer's elements from it. Through the process of visual expression and verbal ability to be able to extract the designer's elements from it. Through the process of visual transformation and analysis we have to extract concepts with united design objects. From these process it should be followed adequate adjudgment on the extracted fragments' assembly and dissociation methods through physical limitation of elements functionality and feasibility's measurements. Therefore from the morphological designed results reflected to typological concepts finished material detail and texture we should be able to take the integrated thinking process system. Lastly interior designer should be able to check whether it was best choice from the consistent design feedback process to ask whether it contains the conceptual design process and new typological objects without non-conformity between past and present days in interior space. Now we should be asked for development of practical design process to be able to realize above assumptions called "Development and Suceeding of Cultural Value System'. Additionally, we have to continue to develop for our true meaning of interior design process, not repetition of past's imitation.tion.

• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.188-196
• /
• 2003

In order to increase competitiveness and to gain economic benefit, companies ask more and more how to recycle their products in a efficient way. So far, to answer this question, companies are not sufficiently supported by suitable methods specially in the area of disassembly process planning. For this reason, we develop in collaboration with an industrial partner a new method for generating an optimal disassembly sequence. In the presented paper this method will be described in detail by considering the exiting assembly information, disassembly method and disassembly depth. PLM (Profit-Loss Margin) curve that is used to determine disassembly depth consists of profit value, disassembly cost and disassembly effect. Using assessment parameters, generated alternative disassembly sequences are evaluated and optimal disassembly sequence is proposed. This method is applied to generate the optimal disassembly sequence of Door Trim as an example.

• World Technopolis Review
• /
• 제7권1호
• /
• pp.59-70
• /
• 2018

Taiwan's economy has been characterized by the strong existence and continuous creation of small and medium-sized enterprises. This phenomenon is commonly regarded to be the result of a culturally embedded strong entrepreneurial spirit. In the process of developing a high-technology industry in southern Taiwan, linking a newly established science park with existing local industries was one of the major challenges. This article reviewed the development history of Tainan Technopolis. Following a concise review of Southern Taiwan Science Park's struggle against becoming an assembly of spillover establishments from Hsinchu Science Park, the authors focused on the efforts of incubating startups. Although only an initial study, the authors demonstrated the roles of National Cheng Kung University and Southern Taiwan Science Park Administration in introducing a two-track incubation system based on collaboration between the two institutions and startups.

• 한국CDE학회논문집
• /
• 제8권2호
• /
• pp.101-108
• /
• 2003

Presented in this paper is the development of an product cost estimation system at the product design stage. The efficient cost estimation function at the design stage is essential for the cost reduction activities through the entire product life cycle. For this purpose, it is necessary to establish a systematic working procedure, and to develop information system for managing a great deal of production and product-related data required for the cost estimation. The developed system has the capability of estimating a cost of assembly type products as well as unit-item type products. As proposed system is based on the variant approach, it can be used easily at an early design stage without the need for detail design information. Also, this system is integrated with legacy PDM (Product Data Management) and ERP (Enterprise Resource Planning) system for fast. accurate and easy product cost estimation. The estimated cost includes material cost, overhead cost as well as labor cost.