• 한국분말재료학회지
• /
• 제26권6호
• /
• pp.455-462
• /
• 2019

ZrB₂ ceramic and ZrB₂ ceramic composites with the addition of SiC, WC, and SiC/WC are successfully synthesized by a spark plasma sintering method. During high-temperature oxidation, SiC additive form a SiO₂ amorphous outer scale layer and SiC-deplete ZrO₂ scale layer, which decrease the oxidation rate. WC addition forms WO₃ during the oxidation process to result in a ZrO₂/WO₃ liquid sintering layer, which is known to improve the anti-oxidation effect. The addition of SiC and WC to ZrB₂ reduces the oxygen effective diffusivity by one-fifth of that of ZrB₂. The addition of both SiC and WC shows the formation of a SiO₂ outer dense glass layer and ZrO₂/WO₃ layer so that the anti-oxidation effect is improved three times as much as that of ZrB₂. Therefore, SiC- and WC-added ZrB₂ has a lower two-order oxygen effective diffusivity than ZrB₂; it improves the anti-oxidation performance 3 times as much as that of ZrB₂.

• 대한한의학방제학회지
• /
• 제19권2호
• /
• pp.109-118
• /
• 2011

Objectives : The Lycoris squamigera Maxim has been used traditionally for treatment of various diseases. However, the studies on the effect of Lycoris squamigera Maxim have not been carried out. In the present study, extract of Lycoris squamigera Maxim were tested for their anti-inflammatory and anti-oxidation effect. Methods : The anti-inflammatory effect of the various solvent extract was studied in lipopolysaccharide (lps)-treated mouse macrophage cells. RAW 264.7 cells were pre-incubated with Lycoris squamigera Maxim extracts for 4h and treated with $1\;{\mu}g/m{\ell}$ lps for 18h, and then the anti-inflammatory effects of extracts were determined. The anti-oxidation effect of extracts measured by DPPH method, reductive potential test, total phenolics test. Results : Extracted root's ethyl acetate layer showed a significant decrease in nitric oxide. And that layer (root's ethyl acetate extract) was showed decrease in TNF-${\alpha}$ concentration dependently. Separated from Root's ethyl acetate extract was fraction 1 has $0.1{\sim}5\;{\mu}M$ range, fraction 2 has $0.1{\sim}10\;{\mu}M$ range did not showed cytotoxicity. Anti-oxidation result as DPPH test showed the best was root ethyl acetate extract. Redusing power was made a comparison between fractions and standard. They were showed similar value. Fraction's total phenol containing result was better then standard. Conclusions : These results suggest that these extracts can be used as anti-inflammatory, anti-axidation materials.

• 한국세라믹학회지
• /
• 제37권9호
• /
• pp.887-893
• /
• 2000

중온형 고체산화물 연료전지용 금속접속자로서의 적용가능성을 알아보기 위하여 내산화막을 코팅한 Ferritic 스틸의 산화특성을 연구하였다. Ferritic 스틸은 고온산화로 형성된 산화크롬, 산화철막에 의해 시간에 따라 저항이 크게 증가함을 보였다. 반면, LMO 코팅한 Ferritic 스틸은 Ducrolloy와 같이 고온저항이 주기적인 증감을 보이면서 증가하지만 내산화막의 형성에 의해 80시간 이후에는 저항증가가 없어 정기 산화안정성을 보였다.

• Journal of Applied Biological Chemistry
• /
• 제55권1호
• /
• pp.35-39
• /
• 2012

선학초 열수 추출물과 에탄올 추출물의 분획물을 항산화 및 주름개선의 소재로 이용하기 위하여 생리활성을 검증하였다. 항산화효과를 확인하기 위하여 전자공여능을 측정한 결과 선학초 열수추출물(AW)과 에탄올추출물(AE) 모두 ethyl acetate층 1,000 ppm에서 각각 96.2, 92.3%의 효과를 나타내었고, SOD 유사활성능을 측정한 결과 AW의 ethyl acetate층에서 61.8%의 활성을 AE의 $n$-butyl alcohol 층에서 58.0%의 높은 활성을 각각 나타내었다. 또한 xanthine oxidase저해활성을 측정한 결과 AW와 AE에서 모두 ethyl acetate층 1,000 ppm일 때, 각각 84.9, 92.5%의 가장 높은 저해율을 나타내었다. 주름개선 효능 확인을 위해 elastase 저해활성을 측정한 결과 이 또한 AW와 AE 모두에서 ethyl acetate층이 각각 55.2, 70.1%의 효능을 나타내었으며, collagenase 저해활성을 측정한 결과 AW의 ethyl acetate층이 90.6%로 가장 높은 저해율을, AE는 88.6%로 $n$-butyl alcohol 층이 가장 높은 저해율을 나타내었다. 이상의 결과로 미루어 보아 선학초의 열수 추출물과 에탄올 추출물의 분획물이 in vitro상에서 항산화 및 주름개선의 활성이 있음을 확인할 수 있었다.

• 한국주조공학회지
• /
• 제18권6호
• /
• pp.593-603
• /
• 1998

Commercial ductile iron was coated with titanium and aluminum powders by low pressure plasma spraying and then irradiated with a $CO_2$ laser to produce anti-corrosive TiC composite layer. TiC carbides were precipitated homogeneously in a laser alloyed layer by in-situ reaction between carbon existed in the base metal and titanium with thermal sprayed coating. The formation of gas pores and brittle limited mixing zone with ledeburite microstructure in TiC composite layer were surpressed by the complementary alloying of aluminum. The hardness of TiC composite layer obtained by addition of titanium and aluminum was between 600 and 660 Hv, which was three times as high as the hardness of ferritic ductile iron. From the results of isothermal oxidation at 1123k for 24 hours in air, high temperature oxidation resistance of the TiC composite layer with aluminum was improved and doubled when compared with the TiC composite layer without aluminum.

• 한국세라믹학회지
• /
• 제31권8호
• /
• pp.874-878
• /
• 1994

To increase the anti-oxidation and anti-wear properties of graphite for the propellant-burning environment, SiC, Pt and Al2O3 multi-layer coatings were conducted succesisvely and the optimum condition was researched. The SiC layer was produced by pack cementation and SiC layer in thickness of 30 ${\mu}{\textrm}{m}$ coating was produced after coating for 6 hours. Pt layer was coated by sputtering, and the Al2O3 layer was coated by reactive sputtering. the thickness of Pt layer and Al2O3 layer was less than one-tenth of that of SiC layer. The pack coated specimens and multi-layer coated specimens were made using above conditions and test-fired. The test result showed that the wear rate of SiC layer is approximately 1/10 compared to that of uncoated graphite.

• 한국표면공학회지
• /
• 제53권5호
• /
• pp.201-206
• /
• 2020

A SiOxCy(-H) thin film was synthesized by atmospheric pressure dielectric barrier discharge(APDBD), and a SiO₂-like layer was formed on the surface of the film by oxidation treatment using oxygen plasma. Hexamethylcyclotrisiloxane was used as a precursor for the SiOxCy(-H) synthesis, and He gas was used for stabilizing APDBD. Oxygen permeability was evaluated by forming an oxidized SiOxCy(-H) thin film on a PET film. When the single-layer oxidized SiOxCy(-H) film was coated on the PET, the oxygen gas permeability decreased by 46% compared with bare PET. In case of three-layer oxidized SiOxCy(-H) film, the oxygen gas permeability decreased by 73%. The oxygen permeability was affected by the thickness of the SiO₂-like layer formed by oxidation treatment rather than the thickness of the SiOxCy(-H) film. The excellent corrosion resistance was demonstrated by coating an oxidized SiOxCy(-H) thin film on the silver-coated aluminum PCB for light emitting diode (LED).

• 한국환경보건학회지
• /
• 제36권3호
• /
• pp.236-246
• /
• 2010

In preparative anti-corrosive coating experiments, polyaniline was obtained by reacting an oxidizing agent with the monomer aniline. Further, the primer coating was prepared using a variety of widely-used materials such as urethane resin. For the top coating, epoxy resin and acrylic urethane resin were used. Characteristics of the coatings were assessed according to KS and ASTM specifications, and the structure of the polyaniline was characterized using FT-IR and TGA. For analysis of anti-corrosive properties in salt-spray experiments, measurements of the oxidation state of iron and surface atomic analysis were conducted using XPS and SEM-EDX. Unlike general anti-corrosive coatings which exhibit anti-corrosive effects only as a primer coating, the anti-corrosive coatings using polyaniline as the anti-corrosive pigment showed a marked synergistic effect with the top coatings. In other words, the top coatings not only produce a fine view effect, but also increase, through interaction with the primer coatings, the resistance to diffusion of corrosive factors from the external environment. It was also found that, unlike the heavy metal oxide-forming layer of the passive barrier alone, the polyaniline anti-corrosive pigment oxidized iron at the interface with the iron substrate to form a passive barrier in the oxidic layer, and itself formed a potential barrier layer with anti-corrosive factors from the external environment. Although the passive layer was damaged, the damaged area did not become completely oxidized iron; on the contrary, it showed a tendency to reduction. This can be interpreted such that a passive layer is formed again on the damaged area, and that at the same time there is a tendency to self-healing.

• Carbon letters
• /
• 제2권1호
• /
• pp.27-36
• /
• 2001

The pack-cementation process is the method which is formed SiC coating layer to improve weak oxidation properties of CFRCs (carbon fiber-reinforced carbons). This method develops the anti-oxidation coating layer having no dimensional changes and good wetting properties. In this study to improve the oxidative resistance of the prepared 4D CFRCs, the surface of CFRCs is coated by SiC using pack cementation method. The mechanical properties of SiC-coated 4D CFRCs are measured by the 3-point bending test, and their ablation properties are investigated by the arc torch plasma test. From the results, it is found that both mechanical and ablation properties of SiC-coated 4D CFRCs are much better than bare CFRCs.

• 한국표면공학회지
• /
• 제51권1호
• /
• pp.11-20
• /
• 2018

Hydrophobic and Superhydrophobic surfaces are promising technology for the surface finishing of metallic materials due to its water-repellency. Realization of highly water-repellent surface on aluminum and its alloys provides various functionalities for real application fields. In order to realize the hydrophobic/superhydrophobic surfaces on aluminum and its alloys, various technologies have been demonstrated. Especially, traditional anodic oxidation for aluminum has been widely employed for the morphological texturing of surfaces, which is essential to enhance the hydrophobic efficiency. De-wetting superhydrophobic surface on aluminum provides various exceptional properties, such as anti-corrosion, anti-/de-icing, anti-biofouling, drag reduction, self-cleaning and liquid separation. Nevertheless, the durability and stability of superhydrophobic surfaces still remain challenges for their actual applications in engineering systems and industry. In this review, the theoretical/experimental studies and current technical limitations on the hydrophobic and superhydrophobic surface using anodic oxidation of aluminum have been summarized.