Formation of TiC Composite Layer on Ductile Iron by Laser Surface Modification

레이저 처리에 의한 구상흑연주철의 TiC 복합화에 관한 연구

  • Kim, Woo-Yeol (Dept. of Production and Joining Eng., Pukyong National University) ;
  • Park, Heung-Il (Dept. of Production and Joining Eng., Pukyong National University)
  • 김우열 (부경대학교 생산가공공학과) ;
  • 박흥일 (부경대학교 생산가공공학과)
  • Published : 1998.12.20

Abstract

Commercial ductile iron was coated with titanium and aluminum powders by low pressure plasma spraying and then irradiated with a $CO_2$ laser to produce anti-corrosive TiC composite layer. TiC carbides were precipitated homogeneously in a laser alloyed layer by in-situ reaction between carbon existed in the base metal and titanium with thermal sprayed coating. The formation of gas pores and brittle limited mixing zone with ledeburite microstructure in TiC composite layer were surpressed by the complementary alloying of aluminum. The hardness of TiC composite layer obtained by addition of titanium and aluminum was between 600 and 660 Hv, which was three times as high as the hardness of ferritic ductile iron. From the results of isothermal oxidation at 1123k for 24 hours in air, high temperature oxidation resistance of the TiC composite layer with aluminum was improved and doubled when compared with the TiC composite layer without aluminum.

Keywords