• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.352-356
• /
• 2011

Transparent conducting oxide films like ITO/Au/ITO and AZO/Au/AZO were fabricated with a sputter at a low-temperature of less then $70^{\circ}C$ and their crystallization and opto-electrical properties were studied. X-ray diffractiometry showed that single-ITO layer was amorphous, whereas, ITO of ITO/Au/ITO multi-layer was crystal. The ITO crystallization and its orientation depended on Au crystallization. Surface roughness of the ITO-multi-layers were in the range of 29-88% of that of ITO-single layer. ITO on amorphous gold layer had more rough surface than ITO on crystal gold. The gold layer between ITO improved electrical conductivity. Carrier density, mobility, resistivity and sheet resistance of ITO-single layer were $2.3{\times}10^{19}/cm^3$, $85{\times}cm^2$/Vs, $31{\times}10^{-4}{\Omega}cm$, and $310{\times}{\Omega}/cm^2$, respectively. Those of ITO/Au/ITO-multi-layers depended on Au-interlayer-thickness, which were in the range of $3.6{\times}10^{19}{\sim}4.2{\times}10^{21}/cm^3$, $43{\sim}85cm^2$/Vs, $0.17{\times}10^{-4}{\sim}25{\times}10^{-4}{\Omega}cm$, and $1.7{\sim}20{\times}{\Omega}/cm^2$, respectively. The sheet resistances of the single-layer ITO and the multi-layer ITO were 310 and $2.7{\sim}21{\Omega}/cm^2$, respectively. That of AZO/Au/AZO was $8.6{\Omega}/cm^2$, which was better than the single-layer ITO.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.6
• /
• pp.351-354
• /
• 2016

The mechanical properties of ITO films such as adhesion and internal stress are very important for the commercial application of solar cell devices. We report high quality pulsed DC magnetron sputtered ITO films deposited on silicon and glass substrates with low resistivity and high transmittance for various working pressures ranging from 0.96 to 3.0 mTorr. ITO films showed the lowest resistivity of $2.68{\times}10^{-4}{\Omega}{\cdot}cm$, high hall mobility of $46.89cm^2/V.s$, and high transmittance (>85%) for the ITO films deposited at a low working pressure of 0.99 mTorr. The ITO films deposited at a low working (0.96 mTorr) pressure had both amorphous and polycrystalline structures and were found to have compressive stress while the ITO films deposited at higher temperature than 0.99 mTorr was mixture of amorphous and polycrystalline and was found to have tensile stress.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.65-74
• /
• 2009

Device quality indium tin oxide (ITO) films are deposited on glass substrates and ultra-thin diamond-like carbon films are deposited as a buffer layer on ITO by a pulsed Nd:YAG laser at 355 nm and 532 nm wavelength. ITO films deposited at room temperature are largely amorphous although their optical transmittances in the visible range are > 90%. The resistivity of their amorphous ITO films is too high to enable an efficient organic light-emitting device (OLED), in contrast to that deposited by a KrF laser. Substrate heating at $200^{\circ}C$ with laser wavelength of 355 nm, the ITO film resistivity decreases by almost an order of magnitude to $2{\times}10^{-4}\;{\Omega}\;cm$ while its optical transmittance is maintained at > 90%. The thermally induced crystallization of ITO has a preferred <111> directional orientation texture which largely accounts for the lowering of film resistivity. The background gas and deposition distance, that between the ITO target and the glass substrate, influence the thin-film microstructures. The optical and electrical properties are compared to published results using other nanosecond lasers and other fluence, as well as the use of ultra fast lasers. Molecularly doped, single-layer OLEDs of ITO/(PVK+TPD+$Alq_3$)/Al which are fabricated using pulsed-laser deposited ITO samples are compared to those fabricated using the commercial ITO. Effects such as surface texture and roughness of ITO and the insertion of DLC as a buffer layer into ITO/DLC/(PVK+TPD+$Alq_3$)/Al devices are investigated. The effects of DLC-on-ITO on OLED improvement such as better turn-on voltage and brightness are explained by a possible reduction of energy barrier to the hole injection from ITO into the light-emitting layer.

• Journal of the Korean Ceramic Society
• /
• v.50 no.4
• /
• pp.288-293
• /
• 2013

Zn-In-Sn-O films were prepared at room temperature by combinatorial RF-magnetron co-sputtering system. The cationic contents of the films were varied using a compositionally combinatorial technique. The effects of the oxygen partial pressure and film compositionon the structural and electrical properties were investigated. The Zn-In-Sn-O films deposited at Ar gas atmosphere showed an amorphous phaseirrespective of the film composition. However, the amorphous Zn-In-Sn-O films with a Zn content below 30.0 at% were converted into a bixbyite type-ITO polycrystalline phase with an increase in the oxygen partial pressure. The resistivity, carrier concentration, and Hall mobility were strongly affected by the oxygen partial pressure and chemical composition of the film. At sufficiently high carrier densities above $5{\times}10^{18}cm^{-3}$, the conduction behavior of amorphous Zn-In-Sn-O film changes from thermally activated to degenerate band conduction accompanied with high mobility.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.399-400
• /
• 2007

In this work, we have investigated the characteristics of the phosphorescent OLED and flexible OLED fabricated on IZTO/glass and IZTO/PET anode film grown by magnetron sputtering, respectively. Electrical and optical characteristics of amorphous IZTO/glass anode exhibited similar to commercial ITO anode even though it was deposited at room temperature. In addition, the amorphous IZTO anode showed higher work function than that of the commercial ITO anode after ozone treatment for 10 minutes. Furthermore, a phosphorescent OLED fabricated on amorphous IZTO anode film showed improved current-voltage-luminance characteristics, external quantum efficiency and power efficiency in contrast with phosphorescent OLED fabricated on commercial ITO anode film. This indicates that IZTO anode is promising alternative anode materials for anode in OLEDs and flexible OLEDs.

• Solar Energy
• /
• v.7 no.2
• /
• pp.7-13
• /
• 1987

Indium-Tin-Oxide (ITO)/Selenium heterojunction solar cells which fabricated by vacuum deposition technique and annealing process has been investigated. Prior to the Selenium deposition, a thin tellurium layer (about $10{\AA}$) was deposited onto the ITO layers to provide a sufficient mechanical bond between the Oxide and Selenium layers. The amorphous Selenium layer was deposited onto the Te-ITO layers, and then the crystallization of the amorphous Selenium was carried out using a hot plate at about $180^{\circ}C$ for 4 min. Efficient Selenium solar cells with conversion efficiency as high as 4.52% under AM1 condition has been fabricated in polycrystalline Selenium layer ($6{\mu}m$). The optimum data in manufacturing Se solar cell was listed in table.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.157-158
• /
• 2013

차세대 고품질 대면적 평판 디스플레이의 투명전극으로서 ITO 박막은 제조 공정에 따라 낮은 비저항뿐만 아니라 좋은 에칭특성 및 기계적 특성을 갖는 비정질 ITO 박막을 필요로 한다. 따라서 불순물 X를 도입하여 초기 박막 핵생성 밀도 및 핵성장을 제어하여 비정질 ITO:X 박막을 제작하고, 전기적, 미세구조적 및 에칭특성 등 물성 변화를 관찰하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.403-403
• /
• 2011

결정질 태양전지는 태양전지 시장에 큰 서막을 장식하였다. 현재 여러 종류의 태양전지 기술들이 많이 나오고 있지만 결정질 태양전지는 변환 효율이 좋고 신뢰성이 높아서 높은 시장 점유율을 차지하고 있다. 하지만 응용 분야가 적고 기판 가격이 비싸다는 단점이 있다. 현재에는 응용분야 개선을 위하여 Flexible solar cell에 대한 연구가 활발하다. Flexible solar cell에 상부전극은 결정질 태양전지에서 사용되는 Ag나 Al 전극 대신 TCO 종류의 일종인 ITO를 많이 사용한다. Flexible Solar cell은 Organic Solar cell과 Amorphous Solar Cell 두 가지 범주를 가지고 있다. 본 연구에서는 Amorphous Solar Cell의 전극에 사용되는 ITO의 온도 Stress에 따른 특성을 연구함으로써 Engineer의 근본적인 이슈인 저비용, 고효율에 초점을 맞추어 소자특성을 확인해 보도록 한다. Glass에 E-beam evaporation 장비를 이용하여 ITO를 증착하였고 제작된 소자를 200, 250, 300, 350$^{\circ}C$의 온도변수를 두어 1시간동안 Annealing 하였다. 각 Annealing 온도에 따른 Sheet resistivity,와 visible 영역의 transmittant를 측정하였다. visible영역에서의 transmittant는 Annealing 200$^{\circ}C$에서 300$^{\circ}C$로 온도가 증가함에 따라 transmittant는 증가하다가 350$^{\circ}C$에서 감소하였다. Sheet resistivity의 경우 Annealing 200$^{\circ}C$에서 300$^{\circ}C$로 온도가 증가함에 따라 ITO의 Sheet resistivity가 줄어들다가 350$^{\circ}C$에서 증가하였다. 300$^{\circ}C$로 Annealing한 ITO가 가시광선 영역에서 transmittant가 가장 높은 80%로 측정 되었다. Sheet resistivity역시 300$^{\circ}C$로 Annealing한 ITO가 8${\Omega}/{\Box}$로 가장 낮았다. Annealing 온도가 ITO의 electrical 특성과 optical 특성에 변화를 주었음을 알 수 있었다. Resistivity가 낮은 ITO 전극으로 박막 셀을 제작한다면 좋은 효율을 얻을 수 있을 거라 생각된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1425-1428
• /
• 2007

The amorphous IZO on flexible substrate (PC) shows similar electrical conductivity and optical transmittance with commercial ITO glass even though it was prepared at $<50\;^{\circ}C$. Moreover, it exhibits little resistance change during 5000 bending cycles, demonstrating good mechanical robustness. A green phosphorescent OLED fabricated on amorphous IZO on flexible PC shows maximum external quantum efficiency of ${\eta}_{ext}=13.7\;%$ and power efficiency of ${\eta}_p=32.7\;lm/W$, which are higher than a device fabricated on a commercial ITO on glass (${\eta}_{ext}=12.4%$ and ${\eta}_p=30.1\;lm/W$) and ITO on flexible PC (${\eta}_{ext}=8.5%$ and ${\eta}_p=14.1\;lm/W$).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.2
• /
• pp.69-74
• /
• 2016

In this study, we proposed an a-IGZO (amorphous In-Ga-Zn-O) TFT (thin-film transistor) with off-planed source/drain structure. Furthermore, two different electrode materials (ITO and Ti) were applied to the source and drain contacts for performance improvement of a-IGZO TFTs. When the ITO with a large work-function and the Ti with a small work-function are applied to drain electrode and source contact, respectively, the electrical performances of a-IGZO TFTs were improved; an increased driving current, a decreased leakage current, a high on-off current ratio, and a reduced subthreshold swing. As a result of gate bias stress test at various temperatures, the off-planed S/D a-IGZO TFTs showed a degradation mechanism due to electron trapping and both devices with ITO-drain or Ti-drain electrode revealed an equivalent instability.