References
- H. L. Hartnagel, A. L. Dawar, A. K. Jain, and C. Jagadish, Semiconducting Transparent Thin Films (Institute of Physics Publishing, Bristol and Philadelphia, 1995)
- L. Meng and M. P. dos Santos, 'Properties of indium tin oxide (ITO) films prepared by r.f. reactive magnetron sputtering at different pressures,' Thin Solid Films 303, 151-155 (1997) https://doi.org/10.1016/S0040-6090(97)00050-3
- C. G. Choi, K. No, W. J. Lee, H. G. Kim, S. O. Jung, W. J. Lee, W. S. Kim, S. J. Kim, and C. Yoon, 'Effects of oxygen partial pressure on the microstructure and electrical properties of indium tin oxide film prepared by d.c. magnetron sputtering,' Thin Solid Films 258, 274-278 (1995) https://doi.org/10.1016/0040-6090(94)06354-0
- H. Bisht, H.-T. Eun, A. Mehrtens, and M. A. Aegerter, 'Comparison of spray pyrolyzed FTO, ATO and ITO coatings for flat and bent glass substrates,' Thin Solid Films 351, 109-114 (1999) https://doi.org/10.1016/S0040-6090(99)00254-0
- J. P. Zheng and H. S. Kwok, 'Low resistivity indium tin oxide films by pulsed laser deposition,' Appl. Phys. Lett. 63, 1-3 (1993) https://doi.org/10.1063/1.109736
- H. Kim, C. M. Gilmore, A. Pique, J. S. Horwitz, H. Mattoussi, H. Murata, Z. H. Kafafi, and D. B. Chrisey, 'Electrical, optical, and structural properties of indium–tin–oxide thin films for organic light-emitting devices,' J. Appl. Phys. 86, 6451-6461 (1999) https://doi.org/10.1063/1.371708
- H. Kim, J. S. Horwitz, G. P. Kushto, Z. H. Kafafi, and D. B. Chrisey, 'Indium tin oxide thin films grown on flexible plastic substrates by pulsed-laser deposition for organic light-emitting diodes,' Appl. Phys. Lett. 79, 284-286 (2001) https://doi.org/10.1063/1.1383568
- F. O. Adurodija, H. Izumi, T. Ishihara, H. Yoshioka, and M. Motoyama, 'Highly conducting indium tin oxide (ITO) thin films deposited by pulsed laser ablation,' Thin Solid Films 350, 79-84 (1999) https://doi.org/10.1016/S0040-6090(99)00278-3
- H. Izumi, T. Ishihara, H. Yoshioka, and M. Motoyama, 'Electrical properties of crystalline ITO films prepared at room temperature by pulsed laser deposition on plastic substrates,' Thin Solid Films 411, 32-35 (2002) https://doi.org/10.1016/S0040-6090(02)00169-4
- M. A. Morales-Paliza, M .B. Huang, and L. C. Feldman, 'Nitrogen as background gas in pulsed-laser deposition growth of indium tin oxide films at room temperature,' Thin Solid Films 429, 220-224 (2003) https://doi.org/10.1016/S0040-6090(03)00159-7
- E. Holmelund, B. Thestrup, J. Schou, N. B. Larsen, M. M. Nielsen, E. Johnson, and S. Tougaard, 'Capacitance–voltage characteristics of liquid crystal displays with periodic interdigital electrodes,' Appl. Phys. A 74, 147-149 (2002) https://doi.org/10.1007/s003390100976
- B. Thestrup, J. Schou, A. Nordskov, N. B. Larsen, 'Electrical and optical properties of thin indium tin oxide films produced by pulsed laser ablation in oxygen or rare gas atmospheres,' Appl. Surf. Sci. 142, 248-252 (1999) https://doi.org/10.1016/S0169-4332(98)00659-X
- J. B. Choi, J. H. Kim, K. A. Jeon, and S. Y. Lee, 'Properties of ITO films on glass fabricated by pulsed laser deposition,' Mater. Sci. Eng. B 102, 376-379 (2003) https://doi.org/10.1016/S0921-5107(02)00625-6
- T. K. Yong, S. S. Yap, G. Safran, and T. Y. Tou, 'Pulsed Nd: YAG laser depositions of ITO and DLC films for OLED applications,' Appl. Surf. Sci 253, 4955-4959 (2007) https://doi.org/10.1016/j.apsusc.2006.11.008
- K. Lminouni, C. Legrand, C. Dufour, and A. Chapoton, 'Diamond-like carbon films as electron-injection layer in organic light emitting diodes,' Appl. Phys. Lett. 78, 2437-2439 (2001) https://doi.org/10.1063/1.1367900
- D. W. Han, S. M. Jeong, S. J. Lee, N. C. Yang, and D. H. Suh, 'Electron injection enhancement by diamondlike carbon film in organic electroluminescence devices,' Thin Solid Films 420-421, 190-194 (2002) https://doi.org/10.1016/S0040-6090(02)00751-4
- S. H. Choi, S. M. Jeong, W. H. Koo, S. J. Jo, H. K. Baik, S. J. Lee, K. M. Song, and D. W. Han, 'Diamond-like carbon as a buffer layer in polymeric electroluminescent device,' Thin Solid Films 483, 351-357 (2005) https://doi.org/10.1016/j.tsf.2004.12.040
- B. J. Chen, X. W. Sun, B. K. Tay, L. Ke, and S. J. Chua, 'Improvement of efficiency and stability of polymer light-emitting devices by modifying indium tin oxide anode surface with ultrathin tetrahedral amorphous carbon film,' Appl. Phys. Lett. 86, 63506-1-3 (2005) https://doi.org/10.1063/1.1796527
- S. S. Yap, R. B. Yang, H. Y. Yow, and T. Y. Tou, 'Enhanced reliability by diamond-like carbon in single-layer organic light emitting diodes,' Electronic Letters 42, 114-115 (2006) https://doi.org/10.1049/el:20063947
- R. B. H. Tahar, T. Ban, Y. Ohya, and Y. Takahashi, 'Tin doped indium oxide thin films: electrical properties,' J. Appl. Phys. 83, 2631-2645 (1998) https://doi.org/10.1063/1.367025
-
C. H. Yi, Y. Y. Shigesato, I. Yasuui, and S. Takaki, 'Microstructure of low-resistivity tin-doped indium oxide films deposited at 150
$\sim200^\circC$ ,' Jpn. J. Appl. Phys. 34, L244-L247 (1995) https://doi.org/10.1143/JJAP.34.L244 - F. O. Adurodija, H. Izumi, T. Ishihara, H. Yoshioka, and M. Motoyama, 'Effects of stress on the structure of indium-tin-oxide thin films grown by pulsed laser deposition,' J. Mater. Sci.: Mater. Electron. 12, 57-61 (2001) https://doi.org/10.1023/A:1011224813782
- E. Burstein, 'Anomalous optical absorption limit in InSb,' Phys. Rev. 93, 632-633 (1954) https://doi.org/10.1103/PhysRev.93.632
- G. Wantz, L.Hirsch, N. Huby, L.Vignau, J. F. Silvain, A. S. Barriere, and J. P. Parneix, 'Correlation between the indium tin oxide morphology and the performances of polymer light-emitting diodes,' Thin Solid Films 485, 247-251 (2005) https://doi.org/10.1016/j.tsf.2005.03.022
- F. Li, H. Tang, J. Shinar, O. Resto, and S. Z. Weisz, 'Effects of aquaregia treatment of indium–tin–oxide substrates on the behavior of double layered organic lightemitting diodes,' Appl. Phys. Lett. 70, 2741-2743 (1997) https://doi.org/10.1063/1.119008
- S. A. Haque, S. Koops, N. Tokmoldin, J. R. Durrant, J. Huang, D. D. C. Bradley, and E. Palomares, 'A multilayered polymer light-emitting diode using a nanocrystalline metal-oxide film as a charge-injection electrode,' Adv. Mater. 19, 683-687 (2007) https://doi.org/10.1002/adma.200601619
- A. C. Ferrari and J. Robertson, 'Resonant raman spectroscopy of disordered, amorphous, and diamond-like carbon,' Phys. Rev. B 64, 075414-13 (2001) https://doi.org/10.1103/PhysRevB.64.075414
- C. Casiraghi, A. C. Ferrari, R. Ohr, A. J. Flewitt, D. P. Chu, and J. Robertson, 'Dynamic roughening of tetrahedral amorphous carbon,' Phys. Rev. Lett. 91, 226104-1-4 (2003) https://doi.org/10.1103/PhysRevLett.91.226104
- K. Yamamoto, Y. Koga, S. Fujiwara, F. Kokai, and R. B. Heimann, 'Dependence of the sp3 bond fraction on the laser wavelength in thin carbon films prepared by pulsed laser deposition,' Appl. Phys. A: Mater. 66, 115-117 (1998) https://doi.org/10.1007/s003390050647
- T. Yoshitake, T. Nishiyama, H. Aoki, K. Suizu, K. Takahashi, and K. Nagayama, 'The effects of substrate temperature and laser wavelength on the formation of carbon thin films by pulsed laser deposition,' Diamond Relat. Mater. 8, 463-465 (1999) https://doi.org/10.1016/S0925-9635(98)00348-3
-
J. Robertson, 'Mechanism of
$\sp^3$ bond formation in the growth of diamond-like carbon,' Diamond Relat. Mater. 14, 942-948 (2005) https://doi.org/10.1016/j.diamond.2004.11.028 - Y. Zhao, S. Y. Liu, and J. Y. Hou, 'Effect of LiF buffer layer on the performance of organic electroluminescent devices,' Thin Solid Films 397, 208-210 (2001) https://doi.org/10.1016/S0040-6090(01)01412-2
- J. Xiao, Z. B. Deng, C. J. Liang, D. H. Xu, Y. Xu, and D. Guo, 'Effect of LiF buffer layer on the performance of organic electroluminescent devices,' Physica E 28, 323-327 (2005) https://doi.org/10.1016/j.physe.2005.04.001
- H. J. Li, R. H. Zhu, X. Y. Li, Z. J. Wang, and B. C. Yang, 'Determination of the optimal thickness of inserted LiF in bilayer organic light-emitting devices,' Solid State Commun. 144, 445-447 (2007) https://doi.org/10.1016/j.ssc.2007.09.018
- K. Han, Y. Yi, W. J. Song, S. W. Cho, P. E. Jeon, H. Lee, C. N. Whang, and K. Jeong, 'Dual enhancing properties of LiF with varying positions inside organic light-emitting devices,' Org. Electron. 9, 30-38 (2008) https://doi.org/10.1016/j.orgel.2007.07.005
- H. You, Y. F. Dai, Z. Q. Zhang, and D. G. Ma, 'Improved performances of organic light-emitting diodes with metal oxide as anode buffer,' J. Appl. Phys. 101, 026105-1-3 (2007) https://doi.org/10.1063/1.2430511
- H. W. Choi, S. Y. Kim, W. K. Kim, K. Hong, and J. L. Lee, 'Effect of magnesium oxide buffer layer on performance of inverted top-emitting organic light-emitting diodes,' J. Appl. Phys. 100, 064106-1-6 (2006) https://doi.org/10.1063/1.2349552
- H. W. Choi, S. Y. Kim, W. K. Kim, and J. L. Lee, 'Enhancement of electron injection in inverted topemitting organic light-emitting diodes using an insulating magnesium oxide buffer layer,' Appl. Phys. Lett. 87, 082102-1-3 (2005) https://doi.org/10.1063/1.2033129
- S. T. Zhang, Y. C. Zhou, J. M. Zhao, Y. Q. Zhan, Z. J. Wang, Y. Wu, X. M. Ding, and X. Y. Hou, 'Role of hole playing in improving performance of organic light-emitting devices with an Al2O3 layer inserted at the cathode-organic interface,' Appl. Phys. Lett. 89, 043502-1-3 (2006)
-
Z. B. Deng, X. M. Ding, S. T. Lee, and W. A. Gambling, 'Enhanced brightness and efficiency in organic electroluminescent devices using
$\SiO_2$ buffer layers,' Appl. Phys. Lett. 74, 2227-2229 (1999) https://doi.org/10.1063/1.123809 -
B. J. Chen and X. W. Sun, 'The role of
$\MgF_2$ buffer layer in tris-(8-hydroxyquinoline)aluminium-based organic light-emitting devices with Mg:Ag cathode,' Semicon. Sci. Tech. 20, 801-804 (2005) https://doi.org/10.1088/0268-1242/20/8/028 - Z. X. Wu, L. D. Wang, H. F. Wang, Y. D. Gao, and Y. Qiu, 'Charge tunneling injection through a thin teflon film between the electrodes and organic semiconductor layer: relation to morphology of the teflon film,' Phys. Rev. B. 74, 165307-1-7 (2006) https://doi.org/10.1103/PhysRevB.74.165307
- B. J. Chen, X. W. Sun, B. K. Tay, L. Ke, and S. J. Chua, 'Improvement of efficiency and stability of polymer light-emitting devices by modifying indium tin oxide anode surface with ultrathin tetrahedral amorphous carbon film,' Appl. Phys. Lett. 86, 063506-1-3 (2005) https://doi.org/10.1063/1.1796527
- S. T. Zhang, X. M. Ding, J. M. Zhao, H. Z. Shi, J. He, Z. H. Xiong, H. J. Ding, E. G. Obbard, Y. Q. Zhan, W. Huang, and X. Y. Hou, 'Buffer-layer-induced barrier reduction: role of tunneling in organic light-emitting devices,' Appl. Phys. Lett. 84, 425-427 (2004) https://doi.org/10.1063/1.1641166
- X. J. Wang, J. M. Zhao, Y. C. Zhou, X. Z. Wang, S. T. Zhang, Y. Q. Zhan, Z. Xu, H. J. Ding, G. Y. Zhong, H. Z. Shi, Z. H. Xiong, Y. Liu, Z. J. Wang, E. G. Obbard, X. M. Ding, W. Huang, and X. Y. Hou, 'Enhancement of electron injection in organic light-emitting devices using an Ag/LiF cathode,' J. Appl. Phys. 95, 3828-3830 (2004) https://doi.org/10.1063/1.1655676
- J. M. Zhao, Y. Q. Zhan, S. T. Zhang, X. J. Wang, Y. C. Zhou, Y. Wu, Z. J. Wang, X. M. Ding, and X. Y. Hou, 'Mechanisms of injection enhancement in organic light-emitting diodes through insulating buffer,' Appl. Phys. Lett. 84, 5377-5379 (2004) https://doi.org/10.1063/1.1764943
- M. Goes, J. W. Verhoeven, H. Hofstraat, and K. Brunner, 'OLED and PLED devices employing electrogenerated, intramolecular charge-transfer fluorescence,' Chem. Phys. Chem. 4, 349-358 (2003) https://doi.org/10.1002/cphc.200390061
Cited by
- Paradoxical hole injection enhancement by contamination on the indium tin oxide surface vol.58, pp.2, 2019, https://doi.org/10.7567/1347-4065/aafa6c