• 전기학회논문지
• /
• 제59권2호
• /
• pp.306-310
• /
• 2010

On account of small size and light weight, a high-speed machine is regarded as a key technology for many future applications of drive systems. In high-speed applications, permanent magnet synchronous motors have a number of merits such as high efficiency and high power density. Therefore, they are suitable for driving the air-blower of a fuel cell electric vehicle (FCEV) where space and energy savings are critical. Particularly, a surface-mounted permanent magnet synchronous motor (SPMSM) of them is mainly used as a high-speed machine. However, the motor has a fatal flaw due to a retaining can to maintain the mechanical integrity of a rotor assembly. The can results in the increase of magnetic air-gap length in the SPMSM. Thus, in this paper, an interior permanent magnet synchronous motor (IPMSM) is applied in order to drive the air-blower of FCEV instead of the SPMSM, and the experimental results of two models are compared to verify the capability of the IPMSM for high-speed applications.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권3호
• /
• pp.165-171
• /
• 2000

This paper proposes a technique to design of air-core type Linear DC Motor(LDM) by using Equivalent Magnetizing Current(EMC) method and has performed its dynamic analysis. The magnetic flux density differ in accordance with airgap position due to difference of mechanical and magnetic air gap length and the coil shape has an influence on the thrust. Therefore, the analysis of magnetic field due to the magnets is carried out by EMC. The phenomena according to the various coil various coil shape under the same Magneto Motive Force(MMF) has been analyzed and its result is applied to the design process. The appropriateness of the proposed technique is confirmed by Finite Element Method(FEM) and its dynamic analysis is carried out from the coupling of the electrical circuit equation and mechanical kinetic equation.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.465-469
• /
• 2019

본 논문에서는 콘크리트 바이브레이터에 Slotless BLDC (Brush Less Direct Current) 모터를 적용하기 위해 BLDC 모터의 토크 및 역기전력 식을 기반으로 하여 설계를 한다. 모터의 길이와 직경의 사이즈가 주어져 있으므로 중요한 파라미터는 공극자속밀도이다. 자기회로의 간략화를 통하여 공극자속밀도를 계산 하였으며, 토크, 역기전력 및 공극자속밀도 식을 기반으로 기초설계를 진행하여 모터의 형상을 결정 하였다. 이후 모터의 고정자의 외경 및 내경, 스택 길이, 속도를 고정값으로 설정한 후 모터의 직경 및 두께를 변수로 지정하여 유한요소법을 이용한 시뮬레이션을 통해 상세설계를 진행하였으며, THD(Total Harmonic Distortion)값이 작으면서 목표 토크 값 이상의 형상을 설계 및 시뮬레이션을 진행하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.857_858
• /
• 2009

On account of small size and light weight, a high-speed machine is regarded as a key technology for many future applications of drive systems. In high-speed applications, permanent magnet (PM) synchronous motors have a number of merits such as high efficiency and high power density. Accordingly, they are suitable for driving the air-blower of a fuel cell electric vehicle (FCEV) where space and energy savings are critical. Particularly, a surface-mounted PM motor of them is mainly used as a high-speed machine. However, the motor has a fatal flaw owing to a retaining can to maintain the mechanical integrity of a rotor assembly. The can results in the increase of magnetic air-gap length in the surface-mounted PM motor. Thus, in this paper, an interior PM motor is designed in order to drive the air-blower of FCEV instead of the surface-mounted PM motor, and the experimental results of two models are compared to verify the capability of the interior PM motor for a high-speed machine.

• 수산해양기술연구
• /
• 제46권4호
• /
• pp.466-475
• /
• 2010

This study intends to present a direction for the better reforming of fishers'onboard living conditions and proposals for preparing for ratification of the Work in Fishing Convention by means of making a comparison between standards on recent national fishing vessel accommodation facilities and standards on the Work in Fishing Convention and Its Recommendation, 2007, ILO. For the most part of standards on national fishing vessel accommodation facilities are somewhat insufficient to satisfy the provisions in Annex III of the Convention. Considering by items on fishing vessel accommodation facilities, the standards on insect protector, noise and vibration, heating and air conditioning, lighting, persons per sleeping room, recreational facility are not provided in national law. Headroom, separation of accommodation, sleeping room floor area, mattress size, mess room, galley and food storage are partially sufficient for the Convention. In case of sanitary facilities, national standards are not sufficient for the Convention. The other side, facilities related safety of ship and crew such as emergency escape etc., are fully sufficient for the Convention. These insufficiencies caused by different types of fishing vessel depend on originality of fishing method and practices. In the comparison between equivalent tonnage about vessel's length on convention and calculated tonnage of national existing fishing vessel, the difference are 226tons about length 24m and 501tons about length 45m. For that reason, headroom, persons per sleeping room, cabin of sicker and injured, sanitary facilities may decide to use gross tonnage in place of length (L) and the alleviating measure basis of convention. But in case of standards on sanitary facilities which are unsufficient for the Convention, specially in coastal fishing vessel length basis should be adopted with alleviating basis for less than length 24m.

• 조명전기설비학회논문지
• /
• 제14권3호
• /
• pp.29-37
• /
• 2000

본 논문에서는 TMS320C32 DSP를 사용하여 저속에서 구동되는 반송용 펀측식 전행 유도전동기의 슬립 각 주파수에 의한 벡터제어를 이용하여 추력제어하였다. 먼저, 반송용 편촉식 선형 유도전동기를 설계 및 제작하고, 이를 해석하였다. 저속에서 제풍의 운반시에 안정성있은 구동올 위해서 벡터제어에 의한 추력제어를 하였고, 정위치 제어를 하기 워해서 Ziegles- Nichols법을 이용하여 PiD제어기를 설계하였다. 저속에셔의 종량부하흘 갖는 반송용 선형기기에서 PID제어기에 추력제어가 가능한 벡터제어기법을 부가한 결과는 제품외 운반시에 안정성있는 구동을 하였으며, 정위치제어를 위한빠른 응답특쟁 및 soft start/stop을 이루었으며, 부하 변동시에도 제동시에 정위치제어를 위한 빠른 응탑 특성의 결과를 얻었다.

• 복식문화연구
• /
• 제26권5호
• /
• pp.727-743
• /
• 2018

In this study, we used the 3D simulation program to create bodice patterns for adolescents boy students and analyze the fitting and air gap through 3D simulation. The purpose of this study was to select the bodice pattern method that best suited the body shapes of the adolescents male students. The subjects of this study were the French E pattern, Japanese N pattern, and Korean industrial L and J patterns. The applied size was the sixth Korean human body size survey data of 2010 Korea. The age range of the subjects was 13-18 years. DC Suite Program Ver. 5.1 was used, and SPSS 23.0 program was used for data analysis. As a result of comparing the shapes of the bodice patterns in the 3D simulation program, the E pattern had two waist darts on the front and one shoulder dart and one waist dart on the back, and the J and L patterns only had one dart on the back. The N pattern had no darts on either the front or back. As a result of examining the appearance evaluation of the pattern, air gap, color distribution, and clothing cross-section, the E pattern was evaluated as the closest to the body, and the N pattern was evaluated as the pattern with the largest allowance. The J pattern was evaluated as the best fit for body shape of the male adolescents. However, it is necessary to develop a pattern system by adding extra ease in setting the center front length.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.928-934
• /
• 2006

최근 환경 친화적인 시스템 개발 및 에너지에 대한 연구가 부각되고 있는 가운데 근래 교통시스템 분야에서도 전기자동차, 신교통 시스템 등의 친환경적 교통수단의 개발이 활발하게 진행 중에 있다. 최근 전기자동차는 환경오염 문제의 대안적인 교통시스템으로 제시되었음에도 불구하고 짧은 1회 충전 주행거리와 긴 충전시간 등 아직 개선되어야 할 문제를 가지고 있다. 또 경량전철의 경우, 기존 접촉에 의한 전력 공급 장치는 유지보수 및 관리비용이 높을 뿐만 아니라 미관상으로도 환경친화성이 낮고 우발적인 접촉으로 인한 사고 등 안전문제가 발생하는 단점이 존재한다. 본 논문에서는 이러한 문제점을 개선할 수 있는 전기궤도차량용 유도 급전 시스템의 개념을 제시하고 전력 집전자의 구조에 대한 상호인덕턴스의 값을 유추하여 시스템의 전력전달 특성에 관하여 알아보고자 한다. 전기궤도차량용 유도 급전 장치는 여객수송을 목적으로 하여 기존의 산업계에서 개발된 소규모 장치보다는 공극의 길이가 길고 대전력을 요구한다. 큰 공극은 유도 급전 장치 주변에 보상회로를 필요로 한다. 고정주파수의 1차측 공진회로를 이용한 보상회로에서의 전력전달특성을 시뮬레이션과 실험을 통하여 알아보았다.

• 한국염색가공학회지
• /
• 제34권1호
• /
• pp.27-37
• /
• 2022

In this study, a study and interpretation of the spinning process in copolymerized aramid spinning was conducted. In order to proceed with the spinning process modeling and analysis, the spinning process was modeled through the physical property modeling of the spinning solution and the structural modeling of the spinneret, and structural stability and flow of the spinneret for this spinning were analyzed. After modeling the spinning solution and the spinneret in a virtual space, the pack pressure and flow rate when the spinning solution was discharged were simulated. Macroscopically, the structural stability of the spinneret was confirmed at the standard pack pressure (100 kg·f/cm²), and microscopically, the flow rate and pressure drop data of the spinning solution according to the L/D(Length (L)/Diameter (D)) value were analyzed. Based on the research and development of virtual engineering modeling and analysis, we present the possibility of changing the shape and mechanical properties of copolymer aramid fibers according to the spinning process.

• International Journal of Railway
• /
• 제2권2호
• /
• pp.93-97
• /
• 2009

The experiments for aerodynamic characteristics of railway acoustic screen are performed using 1/61 scaled-down moving model rig facility which employs an axis symmetry and one wire guidance method. The launching mechanism is an air-gun type. The train model for the experiment is the high speed train (Korea Train Express: KTX) and the tested speed is about 300 km/h. The tested train length is 61 em which is corresponding to two units of KTX train. The cross sectional area and weight of train model are 0.00264 $m^2$ and 287 g, respectively. The Reynolds number based on the model train length is $1.2{\times}10^7$. The strength of pressure wave is measured using piezo typed pressure sensor. The measured pick value of pressure was as high as 365 Pa in the shortest gap between the acoustic screen and model train. The measured pressure is well compared with the field test data of mc 779-1 [2] values. However, the experimental data were slightly lower than the mc 779-1 values. The results show the model test can be used as a substitute for the field test.