DOI QR코드

DOI QR Code

고속회전기 적용을 위한 매입형 영구자석 전동기의 설계 및 실험적 검증

Design and Experimental Verification of an Interior Permanent Magnet Motor for High-speed Machines

  • 김성일 (한양대학교 자동차공학과) ;
  • 이근호 (한양대학교 자동차공학과) ;
  • 이창하 (현대자동차 환경기술연구소) ;
  • 홍정표 (한양대학교 자동차공학과)
  • 발행 : 2010.02.01

초록

On account of small size and light weight, a high-speed machine is regarded as a key technology for many future applications of drive systems. In high-speed applications, permanent magnet synchronous motors have a number of merits such as high efficiency and high power density. Therefore, they are suitable for driving the air-blower of a fuel cell electric vehicle (FCEV) where space and energy savings are critical. Particularly, a surface-mounted permanent magnet synchronous motor (SPMSM) of them is mainly used as a high-speed machine. However, the motor has a fatal flaw due to a retaining can to maintain the mechanical integrity of a rotor assembly. The can results in the increase of magnetic air-gap length in the SPMSM. Thus, in this paper, an interior permanent magnet synchronous motor (IPMSM) is applied in order to drive the air-blower of FCEV instead of the SPMSM, and the experimental results of two models are compared to verify the capability of the IPMSM for high-speed applications.

키워드

참고문헌

  1. A. Binder, T. Schneider, and M. Klohr, "Fixation of buried and surface-mounted magnets in high-speed PM synchronous machines," IEEE Trans. Ind. Appl., vol. 42, no. 4, pp. 1031-1037, 2006. https://doi.org/10.1109/TIA.2006.876072
  2. H. W. Cho, S. M. Jang, and S. K. Choi, "A design approach to reduce rotor losses in high-speed permanent magnet machine for turbo-compressor," IEEE Trans. on Magnetics, vol. 42, no. 10, pp. 3521-3523, Oct. 2006. https://doi.org/10.1109/TMAG.2006.879086
  3. A. M. EL-Refaie, M. R. Shah, R. Qu, and J. M. Kern, "Effect of number of phases on losses in conducting sleeves of surface PM machine rotors equipped with fractional-slot concentrated windings," IEEE Trans. Ind. Appl., vol. 44, no. 5, pp. 1522-1532, Sep./Oct. 2008. https://doi.org/10.1109/TIA.2008.2002207
  4. J. Y. Lee, S. H. Lee, G. H. Lee, J. P. Hong, and J. Hur, "Determination of parameters considering magnetic nonlinearity in an interior permanent magnet synchronous motor," IEEE Trans. on Magnetics, vol. 42, no. 4, pp. 1303-1306, April 2006. https://doi.org/10.1109/TMAG.2006.871951
  5. S. I. Kim, G. H. Lee, J. P. Hong, and T. U. Jung, "Design process of interior PM synchronous motor for 42-V electric air-conditioner system in HEV," IEEE Trans. Magn., vol. 44, no. 6, pp. 1590-1593, 2008. https://doi.org/10.1109/TMAG.2007.916136
  6. E. C. Lovelace, T. M. Johns, T. A. Keim, and J. H. Lang, "Mechanical design considerations for conventionally laminated, high-speed, interior PM synchronous machine rotors," IEEE Trans. Ind. Appl., vol. 40, no. 3, pp. 806-812, May/June 2004. https://doi.org/10.1109/TIA.2004.827440