• 제목/요약/키워드: Aerosol losses

검색결과 9건 처리시간 0.022초

Aerosol Losses in a 100L $Tedlar^{(R)}$ Bag

  • Oh, Sewon
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제20권E2호
    • /
    • pp.61-68
    • /
    • 2004
  • Aerosol losses in a 100L Tedlar$^{(R)}$ bag were investigated for the aerosols with number median diameter of 0.05 ${\mu}{\textrm}{m}$ and number concentration of 6.4 ${\times}$ 10$^4$ cm$^{-3}$ . Over a 1 hr period, loss of particles in the bag is apparent, and the volume decrease with time is significant. The number concentration, surface area, and volume concentration of the aerosols decreased to 34, 50, and 52% of the initial value in 30 min, respectively. This indicates that deposition to the walls was the main loss process for aerosols in the Tedlar$^{(R)}$ bag. Theoretical calculations showed that coagulations and deposition by diffusion and gravitational sedimentation would not change aerosol characteristics significantly, and the electrical force was the dominant loss process for particles in the Tedlar$^{(R)}$ bag over a 1 hr period.eriod.

고정 오염원의 연소과정에서 발생하는 먼지를 측정하기 위한 희석방법 연구동향 (Dilution methods for combustion aerosol measurement from stationary emission sources: A review)

  • 우창규;김학준;김용진;한방우;강수지;천성남
    • 한국입자에어로졸학회지
    • /
    • 제13권4호
    • /
    • pp.165-172
    • /
    • 2017
  • For precise particle measurements in combustion environments, various dilution sampling methods were compared. Dilution equipments using dilution tunnels and hot/cold dilution with porous tube dilutors were most frequently used so far. The combination of porous tube dilutor and ejector diluter has relatively small footprint, and it results in lower particle losses compared to other methods. To determine the portion of condensable particulate matter, proper temperature control and flow control is required.

에어로졸 기술로 제작된 은 나노 입자를 활용한 페로브스카이트 태양전지 성능 향상 연구 (Performance enhancement of perovskite solar cells using Ag nanoparticles via aerosol technology)

  • 박수아;박인용;박대훈;한방우;이건희;김민철
    • 한국입자에어로졸학회지
    • /
    • 제19권2호
    • /
    • pp.21-30
    • /
    • 2023
  • Solar cells, converting abundant solar energy into electrical energy, are considered crucial for sustainable energy generation. Recent advancements focus on nanoparticle-enhanced solar cells to overcome limitations and improve efficiency. These cells offer two potential efficiency enhancements. Firstly, plasmonic effects through nanoparticles can improve optical performance by enhancing absorption. Secondly, nanoparticles can improve charge transport and reduce recombination losses, enhancing electrical performance. However, factors like nanoparticle size, placement, and solar cell structure influence the overall performance. This study evaluates the performance of silver nanoparticles incorporated in a p-i-n structure of perovskite solar cells, generated via aerosol state by the evaporation and condensation system. The silver nanoparticles deposited between the hole transport layer and transparent electrode form nanoparticle embedded transport layer (NETL). The evaluation of the optoelectronic properties of perovskite devices using NETL demonstrates their potential for improving efficiency. The findings highlight the possibility of nanoparticle incorporation in perovskite solar cells, providing insights for sustainable energy generation.

Characterization of Particle Losses in a Perma Pure Dryer

  • R. B. Xiang;Lee, K. W.;C. H. Jung;Kim, J. Y.;Park, B. C.
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2002년도 춘계학술대회 논문집
    • /
    • pp.237-238
    • /
    • 2002
  • Particle - bound water changes the physical and chemical properties of aerosol particles, such as size and light scattering properties. Consequently, it is necessary to remove water vapor from ambient aerosols before aerosol particles are sized and counted. Silicon gel diffusion dryer is commonly employed for this purpose. However, it can not be operated continuously While in operation, silicon gel becomes progressively more loaded with water and must periodically be regenerated by drying off the water. (omitted)

  • PDF

에어로졸성막법에 의해 제작된 Bi:YIG 막에 미치는 에어로졸유량의 영향 (Effect of Carrier Gas Flow Rate on Magnetic Properties of Bi:YIG Films Deposited with Aerosol Deposition Method)

  • 신광호
    • 한국자기학회지
    • /
    • 제18권1호
    • /
    • pp.14-18
    • /
    • 2008
  • 본 연구에서는 Bi:YIG($Bi_{0.5}Y_{2.5}Fe_5O_{12}$) 막을 에어로졸 성막법을 이용하여 제작함에 있어서, 에어로졸을 구성하는 수송가스의 유량이 막의 자기적 특성과 광학적인 특성에 대하여 분석하였다. 직경 $100{\sim}500$ nm 의 Bi:YIG 분말을 질소 가스를 수송가스로 사용하여 성막을 실시하였고, 이 때, 수송가스의 유량은 0.5 l/min${\sim}10$ l/min 사이에서 변화시켰다. 수송가스의 유량이 증가할수록 Bi:YIG 막의 보자력은 51 Oe에서 37 Oe까지 지수함수적으로 감소하였다. 이것은 충돌에너지가 증가함에 따라 막내부 혹은 막표면의 결함이 감소하였기 때문이라고 고찰되었다. 포화자화는 유량이 증가할수록 감소하였는데, 이는 충돌에너지가 강해짐에 따라 결정이 왜곡되는 힘을 받았기 때문이라고 고찰되었다.

30nm~3000nm 광범위 직경 입자의 공기역학적 집속에 대한 수치해석 (A Numerical Simulation of Aerodynamic Focusing of Nanoparticles in a Wide Range of 30nm~3000nm)

  • 이광승;이동근
    • 한국입자에어로졸학회지
    • /
    • 제7권4호
    • /
    • pp.123-130
    • /
    • 2011
  • Previous designs of conventional aerodynamic lenses have a limitation of narrow range of focusable particle size, e.g. 30 to 300nm or 3 to 30nm. To enlarge the focusable size range to 30-3000nm, it is necessary to avoid a significant loss of particles larger than 300nm inside the lenses. From numerical simulations on size-resolved particle trajectories, we confirmed that the traveling losses of such large particles could be avoided only when the radial position of particles approaching the orifice lens was near the lens axis. Hence, we designed the lens system consisting of a converging-diverging nozzle and 7 orifices to fulfill the requirement. In particular, the orifices were aligned in a way that their diameters were descending and ascending to the downstream. As a result, 30-2800nm particles can be focused to the particle beam of 0.2mm or less in radius with above 85% transmission efficiency. Even $10{\mu}m$ particles can be focused with 74% of transmission efficiency.

Corona Discharge Characteristics and Particle Losses in a Unipolar Corona-needle Charger Obtained through Numerical and Experimental Studies

  • Intra, Panich;Yawootti, Artit;Rattanadecho, Phadungsak
    • Journal of Electrical Engineering and Technology
    • /
    • 제12권5호
    • /
    • pp.2021-2030
    • /
    • 2017
  • In this paper, the unipolar corona-needle charger was developed and its capabilities were both numerically and experimentally investigated. The experimental corona discharges and particle losses in the charger were obtained at different corona voltage, aerosol flow rate and particle diameter for positive and negative coronas. Inside the charger, the electric field and charge distribution and the transport behavior of the charged particle were predicted by a numerical simulation. The experimental results yielded the highest ion number concentrations of about $1.087{\times}10^{15}ions/m^3$ for a positive corona voltage of about 3.2 kV, and $1.247{\times}10^{16}ions/m^3$ for a negative corona voltage of about 2.9 kV, and the highest $N_it$ product for positive and negative coronas was found to about $7.53{\times}10^{13}$ and $8.65{\times}10^{14}ions/m^3$ s was occurred at the positive and negative corona voltages of about 3.2 and 2.9 kV, respectively, and the flow rate of 0.3 L/min. The highest diffusion loss was found to occur at particles with diameter of 30 nm to be about 62.50 and 19.33 % for the aerosol flow rate of 0.3 and 1.5 L/min, respectively, and the highest electrostatic loss was found to occur at particles with diameters of 75 and 50 nm to be about 86.29 and 72.92 % for positive and negative corona voltages of about 2.9 and 2.5 kV, respectively. The numerical results for the electric field distribution and the charged particles migration inside the charger were used to guide the description of the electric field and the behavior of charged particle trajectories to improve the design and refinement of a unipolar corona-needle charger that otherwise could not be seen from the experimental data.

닭 Mycoplasma gallisepticum 6/85 생균 백신의 효능 평가 (Evaluation of efficacy of Mycoplasma gallisepticum 6/85 live vaccine)

  • 윤희준;강정무;김길동;신은경;정용운;정지혜;한태욱
    • 대한수의학회지
    • /
    • 제46권3호
    • /
    • pp.207-214
    • /
    • 2006
  • Mycoplasma gallisepticum (MG) continues to persist in many commercial layer farms in Korea,resulting in losses in egg production. Bacterins and live attenuated vaccines have been used for the prevention of losses caused by MG. One of these attenuated vaccines, MG 6/85 vaccine has been reported to be safe and efficacious in layers. However, MG 6/85 vaccine has not been evaluated for its safety and its efficacy in any commercial layer in Korea. Six-week-old specific pathogen-free (SPF) chickens were vaccinated with MG 6/85 vaccine by aerosol and were challenged with virulent MG R strain at 4 weeks after vaccination. The vaccinated group was able to resist challenge into the air sacs because the vaccinated group showed much less air sac lesion compared with the unvaccinated group. Each of two commercial layer farms was divided into vaccinated and unvaccinated groups. For each vaccinated gorup, MG 6/85 vaccine were sprayed at 17 week old on farm A and at 15 weeks old on farm B. Hen-day egg production, Hen-housed eggs, egg weight, mortality were evaluated until 50 week after vaccination.Compared with the unvaccinated group in each farm, the vaccinated group showed higher average egg production and egg weight, and higher hen-housed number. Results of this study are in agreement with other previous reports which demonstrated that MG 6/85 vaccine favorable effect on performance in commercial layers.

한반도에서 위험기상 발생 시 나타나는 해수면온도 변동의 특성 (Characteristics of Sea Surface Temperature Variation during the High Impact Weather over the Korean Peninsula)

  • 정은실
    • 한국지구과학회지
    • /
    • 제40권3호
    • /
    • pp.240-258
    • /
    • 2019
  • 태풍, 집중호우, 대설은 매년 우리나라에서 치명적인 손실을 초래한다. 따라서 정기적인 관측을 통하여 이러한 현상의 발생 가능성을 미리 알 수 있다면, 사회적으로 큰 유익을 제공할 수 있을 것이다. 우리나라는 삼면이 바다로 둘러싸여 있고, 해수면온도가 태풍, 집중호우, 대설 발달에 직 간접적으로 영향을 미치므로, 이 논문에서는 위험기상과 관련하여 나타나는 해수면온도 변동성의 특성을 조사하였다. 우리나라에서 발생하는 집중호우는 서울경기 부근 및 서해안을 중심으로, 그리고 남해안을 중심으로 분포하였다. 대설은 주로 동해안지역(이하 영동 대설)과 남서부 지역(호남형 대설)에서 발생하였다. 위험기상 종류 및 주요 발생지역에 따라 해수면온도 변동성이 조금씩 다르게 나타났으며, 집중호우 발생 시에 진도-제주도-이어도-중국 상하이 방향으로 이어지는 해역에서 해수면온도 변동성이 크게 나타났다. 대설 발생 시, 대설형태와 상관없이, 제주도 남쪽 해상에서 해수면온도 변동성이 작은 영역이 관측되었으며, $130^{\circ}E$, $39^{\circ}N$ 부근 동해상에서 강한 해수면온도 변동성이 나타났다. 해수면온도 변동성이 큰 지역은, 대기-해양 상호작용 메커니즘을 연구하는 기초자료로 사용될 수 있을 뿐만 아니라, 배경대기 에어로졸 관측영역 결정에도 활용될 것이다.