• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.2
• /
• pp.105-110
• /
• 2009

The techniques of intelligent interference cancellation are used for achieving the improvement of deterioration, which is arisen to the interoperable terminal(GSM and DVB-H). In this paper, we propose a novel system that improve the DVB-H received performance by using the method of an adaptive interference canceller for GSM900 and DVB-H terminal. The interference for the collocated GSM900 and DVB-H receiver is cancelled by using the adaptive canceller with the low-noise ADC(Analog to Digital Converter) in the RF stage.

• Journal of Biomedical Engineering Research
• /
• v.28 no.4
• /
• pp.539-548
• /
• 2007

In the paper, a wireless charger with the function of auto-shutdown for fully implantale middle ear hearing devices (F-IMEHD) has been designed. The wireless charger can communicate with an implant module to be turned off automatically shutdown after an internal rechargeable battery has been fully-charged by electromagnetic coupling using two coils. For the communication with an implant module, the wireless charger uses the load shift keying (LSK) method. But, the variation of the mutual inductance due to the different distance between two coils can cause the communication error in receiving the fully-charged signal from an implant module. To solve the problem, the implemented wireless charger has a variable reference generator for LSK communication. The wireless charger generates proper level of the reference voltage for a comparator using an ADC (analog-to-digital converter) and a DAC (digital-to-analog converter). Through the result of experiment, it has been confirmed that the presented wireless charger can detect signals from implantable module. And wireless charger can stop generating electromagnetic flux after an implanted battery has been fully charged in spite of variable coil distance according to different skin thickness.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.11
• /
• pp.933-940
• /
• 2021

The space-borne SAR(Synthetic Aperture Radar) system radiates the microwave signal and receives the backscattered signal. The received signal is converted to digital at the Digital Receiver, which is implemented at the end of the SAR sensor receiving chain. The converted signal is formated after signal processing such as filtering and data compression. Two quantization are conducted in the Digital Receiver. One quantization is an analog to digital conversion at ADC(Analog-Digital Converter). Another quantization is the BAQ(Block Adaptive Quantization) for data compression. The quantization process is a conversion from a continuous or higher bit precision to a discrete or lower bit precision. As a result, a quantization noise is inevitably occurred. In this paper, the impact of two quantization processes are analyzed in a view of SNR degradation.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.3
• /
• pp.145-148
• /
• 2015

In this letter, we present a new linearization method for a voltage controlled oscillator (VCO)-based quantizer in an analog-to-digital converter (ADC). The nonlinearity of the VCO generates unwanted harmonic spurs and reduces the signal-to-noise and distortion ratio (SNDR) of the VCO-based quantizer. This letter suggests a frequency-to-current feedback method to effectively suppress harmonic distortion. The proposed method decreases the harmonic spurs by more than 53 dB. And a VCO-based quantizer employing the proposed linearization method achieves a high SNDR of 74.1 dB.

• ETRI Journal
• /
• v.39 no.2
• /
• pp.145-150
• /
• 2017

As wearable devices are powered by batteries, they need to consume as little energy as possible. To address this challenge, in this article, we propose a synergistic technique for energy-efficient approximate speech signal processing (ASSP) for wearable devices. More specifically, to enable the efficient trade-off between energy consumption and sound quality, we synergistically integrate an approximate multiplier and a successive approximate register analog-to-digital converter using our enhanced conversion algorithm. The proposed ASSP technique provides ~40% lower energy consumption with ~5% higher sound quality than a traditional one that optimizes only the bit width of SSP.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1058-1063
• /
• 2020

This paper proposes a 12-bit SAR A/D(Successive Approximation Register Analog-to-Digital) converter that operates at low power for bio-signal and sensor signal processing. The conventional SAR A/D converter utilized the reduction of the dynamic current, which resulted in reducing total power consumption. In order to solve the limitation of the sampling time due to charging/discharging of the capacitor for reducing dynamic current, the different sampling time on the C-DAC bit switch operation was applied to reduce the dynamic current. In addition, lowering the supply voltage of the digital block to 0.6V led to 70% reduction of the total power consumption of the proposed ADC. The proposed SAR A/D was implemented with CMOS 65nm process 1-poly 6-metal, operates with a supply voltage of 1.2V. The simulation results demonstrate that ENOB, DNL/INL, power consumption and FoM are 10.4 bits, ±0.5LSB./±1.2LSB, 31.2uW and 2.8fJ/step, respectively.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.449-450
• /
• 2008

In this paper, we present the design of a system on a chip(SoC) based on Powerline Communication for Power-IT. The SoC deals with power information obtained from analog to digital converter and transmits this data via powerline. We integrate main processor, ADC and PLC function into a chip. Also a FPGA-based emulation system is introduced to evaluate a proposed SoC architecture.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.37-47
• /
• 2006

This work proposes a 10b 25MS/s $0.8mm^2$ 4.8mW 0.13um CMOS A/D Converter (ADC) for high-performance wireless communication systems such as DVB, DAB and DMB simultaneously requiring low voltage, low power, and small area. A two-stage pipeline architecture minimizes the overall chip area and power dissipation of the proposed ADC at the target resolution and sampling rate while switched-bias power reduction techniques reduce the power consumption of analog amplifiers. A low-power sample-and-hold amplifier maintains 10b resolution for input frequencies up to 60MHz based on a single-stage amplifier and nominal CMOS sampling switches using low threshold-voltage transistors. A signal insensitive 3-D fully symmetric layout reduces the capacitor and device mismatch of a multiplying D/A converter while low-noise reference currents and voltages are implemented on chip with optional off-chip voltage references. The employed down-sampling clock signal selects the sampling rate of 25MS/s or 10MS/s with a reduced power depending on applications. The prototype ADC in a 0.13um 1P8M CMOS technology demonstrates the measured DNL and INL within 0.42LSB and 0.91LSB and shows a maximum SNDR and SFDR of 56dB and 65dB at all sampling frequencies up to 2SMS/s, respectively. The ADC with an active die area if $0.8mm^2$ consumes 4.8mW at 25MS/s and 2.4mW at 10MS/s at a 1.2V supply.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.849-852
• /
• 2001

본 눈문에서는 뒤틀림, 응력, 압력[1], 토크, 가속도 등의 물리적인 동적 현상을 측정하여 수집된 데이터를 처리하기 위한 신호처리(Signal Processins) 기능이 결합되어 넓은 용도로 활용할 수 있는 센서 신호 수집 시스템을 구현하였다. 구현된 시스템은 data acquisition board 의 하드웨어와 소프트웨어로 나누어 볼 수 있다. 하드웨어의 구성은 아날로그부, 디지털부, 그리고 시스템 인터페이스 처리부로 되어 있다. 아날로그부에서는 센서신호를 받아서, PGA (Programmable Gain Amplifier)[2]와 Op-Amp를 사용하여 signal conditioning 처리하여 8차 Lowpass Filter 로 보낸다. Filtering 된 신호는 ADC (Analog to Digital Converter) 가 내장되어 있는 PIC(3) microcontroller로 보내져 AD변환과 디지털 신호 처리를 한다. 처리된 신호는 RS232 인터페이스를 통해 호스트 컴퓨터로 보내 사용자가 분석할 수 있도록 한다. 또한 LCD display 실시간으로 확인, 분석할 수 있으며 동시에analog output에서 센서신호의 특징을 분석 할 수 있도록 한다.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.839-841
• /
• 2004

This paper presents a SPMSM servo motor drive system using high performance TMS320 F281T DSP for the industrial application. This high performance DSP contains some special peripheral circuits such as PWM (Pulse Width Modulation) waveform generation circuit, Quadrature Encoder Pulse (QEP) generation circuit and Analog to Digital Converter (ADC) circuit. In this paper, a servo drive control system is constructed using high performance DPS for the overall system cost reduction and the size minimization.