• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1442-1447
• /
• 2004

In this paper, a 6-Bit CMOS Folding and Interpolating AD Converter is presented. The converter is considered to be useful as an integrated part of a VLSI circuit handling both analog and digital signals as in the case of HDD or LAN applications. A built-in analog circuit for VLSI of a high-speed data communication requires a small chip area, low power consumption, and fast data processing. The proposed folding and interpolating AD Converter uses a very small number of comparators and interpolation resistors, which is achieved by cascading a couple of folders working in different principles. This reduced number of parts is a big advantage for a built-in AD converter design. The design is based on 0.25m double-poly 2 metal n-well CMOS process. In the simulation, with the applied 2.5V and a sampling frequency of 500MHz, the measurements are as follows: power consumption of 27mw, INL and DNL of $\pm$0.1LSB, $\pm$0.15LSB each, SNDR of 42dB with an input signal of 10MHz.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.195-206
• /
• 2024

Shenzhen Innovation Light source Facility (SILF) is a 3.0 GeV fourth generation diffraction limited synchrotron light source currently under construction in Shenzhen. The SILF storage ring is proposed to use two 500 MHz single cell superconducting radio frequency (SRF) cavities to provide 2.4 MV RF voltage. In this study, we examined the geometric structure of mature CESR superconducting cavities and adopted a beam-pipe-type extraction scheme for high-order modes (HOM). One of the objectives of SRF cavity design and optimization in this study is to reduce E_p/E_acc and B_p/E_acc as much as possible to reduce power loss and ensure stable operation of the cavity. To reduce the risk of beam instability and thermal breakdown, the HOM and Multipacting (MP) are simulated. Moreover, the mechanical properties of the cavity are analyzed, including frequency sensitivity from pressure of liquid helium (LHe), stress, tuning, Lorentz force detuning (LFD), the microphone effect, and buckling. By comprehensive design and optimization of 500 MHz single-cell SRF cavities, a superconducting cavity for SILF storage ring was developed. This paper will detailed present the design and simulation.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.415-422
• /
• 2020

Federal Communications Commissions (FCC) has adopted a new rule that can provide a 1,200 MHz unlicensed spectrum to maximize the public benefits in the 5.925 ~ 7.125 GHz(6 GHz) band by expanding unlicensed broadband into the 6 GHz band while also ensuring that licensed services that operate in the band continue to thrive. In Korea, the M/W band of 6 GHz has been reallocated to introduce unlicensed services in the 6 GHz band. Considering the national interests, the entire 1,200 MHz will be supplied for the indoor uses, but only the 500 MHz of the lower bandwidth (5925 ~ 6425 MHz) will for the outdoor uses under the limited power to protect the incumbent services. The introduction of unlicensed devices is being actively promoted through the reallocation of the 6 GHz M/W band, but since it is desperately necessary to prepare technical requirements to operate them in Korea. In this paper, the US 6 GHz unlicensed rules has been analyzed, these results will be utilized for establishing Korean technical standards with the unlicensed spectrum expansion.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.1-7
• /
• 2016

In this paper, the tunable filter based on high power cavity using mechanical switch for 1.5 GHz band is presented. The LPF is inserted to eliminate the spurious wave, coupler is embeded to extract the output power, and then the tunable filter system is configured using mechanical switch. The LPF obtains attenuation over 40 dB between 4 GHz and 12.75 GHz, Coupler is satisfied with coupling value 40 dB and coupling isolation over 55 dB. The tunable filter system using mechanical switch obtains insertion loss 0.88 dB at bypass mode between 1,495.9 MHz and 1,510. 9 MHz, 3.29 dB at fil mode between 1,495.9 MHz and 1,500.9 MHz. It is also satisfied with output power of 132 W at the center frequency 1,498.4 MHz, and switching time below 10 ms.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.6
• /
• pp.59-66
• /
• 2018

In this paper, we experimented how long distance voice communication is possible After implemented PTT(Push to talk) Bi-directional radio using open source project Codec 2, which is a low speed voice codec for digital amateur radio and 900MHz FSK transceiver. In case of a general digital radio, the AMBE+2 codec, which is regarded as an industry standard in terms of performance, is expensive and has the monopoly of technology. Using the 400MHz band in terms of frequency, narrow bandwidth of DMR(12.5kHz) and DPMR(6.25kHz) is used, so the data rate is low. In the 900MHz bandwidth can be extended, which is advantageous in terms of data transmission. As a result of the voice quality and distance field test, we could find that the communication takes place within about 500m. In this paper, only voice communication is reviewed. if a review of data transmission such as a simple image is added, this solution can be used in various fields as a low cost IOT radio.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.1
• /
• pp.14-21
• /
• 2011

A 10b 500MS/s $0.13{\mu}m$ CMOS ADC is proposed for 4G wireless communication systems such as a LTE-Advanced and SDR The ADC employs a calibration-free single-channel folding architecture for low power consumption and high speed conversion rate. In order to overcome the disadvantage of high folding rate, at the fine 7b ADC, a cascaded folding-interpolating technique is proposed. Further, a folding amplifier with the folded cascode output stage is also discussed in the block of folding bus, to improve the bandwidth limitation and voltage gain by parasitic capacitances. The chip has been fabricated with $0.13{\mu}m$ 1P6M CMOS technology, the effective chip area is $1.5mm^2$. The measured results of INL and DNL are within 2.95LSB and l.24LSB at 10b resolution, respectively. The SNDR is 54.8dB and SFDR is 63.4dBc when the input frequency is 9.27MHz at sampling frequency of 500MHz. The ADC consumes 150mW($300{\mu}W/MS/s$) including peripheral circuits at 500MS/s and 1.2V(1.5V) power supply.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.4 s.32
• /
• pp.93-97
• /
• 2004

This paper proposed that a small type conductor surface open-loop antenna model for the moisture sensor and its operating characteristics were analysed numerically by using the moment methods. The numerical analysis results from this antenna model showed that this antenna could match the input impedance to $50[{\Omega}]$ by changing parameters of the antenna in the frequency range from 300[MHz] to 500[MHz]. This model also showed that the open-loop radius. height and wire width give a tremendous influence on the antenna resonance variation. while the loaded inductance values affects the variation or the input impedance at the resonance frequencies.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.69-75
• /
• 2004

This work proposes an 8b 220 MS/s 230 mW 3-stage pipeline CMOS ADC with on-chip filers for temperature- and power- insensitive voltage references. The proposed RC low-pass filters improve switching noise performance and reduce reference settling time at heavy R & C loads without conventional off-chip large bypass capacitors. The prototype ABC fabricated in a 0.25 um CMOS occupies the active die area of 2.25 $\textrm{mm}^2$ and shows the measured DNL and INL of maximum 0.43 LSB and 0.82 LSB, respectively. The ADC maintains the SNDR of 43 dB and 41 dB up to the 110 MHz input at 200 MS/s and 220 MS/s, respectively, while the SNDR at the 500 MHz input is degraded as much as only 3 dB than the SNDR at the 110 MHz input.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.1
• /
• pp.86-92
• /
• 1999

This paper proposed a small type ofen-loop antenna model for the moisture sensor, and its operating characteristics were analyzed numerically using the moment methods. The numerical analysis results through the moment methods showed that this antenna was able to match the input impedance to 50$\Omega$ by changing parameters of the antenna in the frequency range from 300MHz to 500MHz. The gain of antenna was obtained about 2.5dBd. This antenna proposed in this paper showed not only the radiation pattern characteristics of the uniform distribution toward the axial direction above the antenna, but also the narrowband resonant characteristics. Thus we can propose that the antenna be more suitable for the moisture sensor.

• Progress in Medical Physics
• /
• v.16 no.3
• /
• pp.155-159
• /
• 2005

As a part of implantable device in body, a transcutaneous energy transmission system has been developed. It would be desirable to tansfer electrical energy to implantable devices transcutaneously. The distance between transcutaneous transformer windings are approximately equal to the thickness of the human's skin, nominally between 10$\~$20 mm. Class-E resonant amplifier is used to drive a primary coil for high efficiency. Maximum current is above 50 mA at any frequency. The developed system shows that the circuit operates correctly at each frequency; 500 kHz, 1 MHz and 4 MHz.