• Journal of Life Science
• /
• v.21 no.1
• /
• pp.127-133
• /
• 2011

${\beta}$-Galactosidase was immobilized on chitosan bead by covalent bonding using glutaraldehyde. The characteristics of the immobilized enzyme were investigated. Maximum immobilization yield of 75% was obtained on chitosan bead. Optimum pH and temperature for the immobilized enzyme was 7.0 and $50^{\circ}C$, respectively. The immobilized enzyme showed a broader range of pH and temperature compared to a free one. A mathematical model for the operation of the immobilized enzyme in a packed-bed reactor was established and solved numerically. Under different inlet lactose concentrations and feed flow rate conditions, lactose conversion was measured in a packed-bed reactor. The experimental results of continuous operation in a packed-bed reactor were compared to theoretic results using Michaelis-Menten kinetics with competitive product inhibition and external mass transfer resistance. The model predicted the experimental data with errors less than 5%. Process optimization of continuous operation in a packed-bed reactor was also conducted. In a recirculation packed-bed operation, conversion of lactose was 97% in 3 hours. In a continuous packed-bed operation, the effect of flow rate and initial lactose concentration was investigated. Increasing flow rates and initial lactose concentration decreased the conversion of substrate.

• The Journal of Engineering Geology
• /
• v.13 no.3
• /
• pp.369-378
• /
• 2003

The statistical modeling was introduced to satisfy various experimental conditions on the sorption of heavy metals (Pb, Cu, Cd, and Zn) by clay minerals, i.e. kaolinite, illite and chlorite. The Box-Behnken model designed statistically was applied to determine a relative impact among three variables such as pH, HCO3(or K) concentration and initial concentration of heavy metals. The SAS program was used to obtain the statistical solution by surface response analysis. The results of a statistical sorption modelling indicated that pH is a strong impact of the variables influencing the sorption of heavy metals. A relative effect between an initial concentration of heavy metals and bicarbonate(or K) concentration is dependent on solution condition. The sorption edge of heavy metals as function of pH shows sigmoidal curve, and a great increase in the range of pH 6～8. The sorption sequence among heavy metals is Cu>Pb>>Zn>Cd. The solution chemistry exerts greater influence on the sorption of heavy metals rather than the crystal chemistry of clay minerals. The potassium exerts some effect into a sorption competition with heavy metals. The research suggests that the statistical modeling is an effective method to demonstrate sorption results in three dimension and to reduce the effort of batch sorption experiment.

• Water for future
• /
• v.26 no.1
• /
• pp.81-91
• /
• 1993

In this paper, a moving storm in the real watershed was simulated using a distributed model. Macks Creek Experimental Watershed in Idaho, USA was selected as a target watershed and the moving storm of August 23, 1965, which continued from 3:30 P.M. to 5:30 P.M., was utilized. The rainfall intensity of the moving storm in the watershed was temporally varied and the storm was continuously moved from one place to the other place in a watershed. Furthermore, runoff parameters, which are soil types, vegetative cover percentages, overland plane slopes, channel bed slopes and so on, are spatially varied. The model developed in the previous paper was utilized as a distributed model for simulating the moving storm. In the model, runoff in a watershed was simulated as two parts which are overland flow and channel flow parts. The good agreement was obtained between a simulated hydrograph using a distributed model and an observed hydrograph. Also, the conservations of mass are well indicated between upstream and downstream at channel junctions.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.3
• /
• pp.69-77
• /
• 2003

This study was carried out to evaluate the WASP5 model parameters and to analyze the sensitivity of parameters in Daechung Reservoir. The values predicted by the model and tendency were very similar to the observed data at Daejeon intake, so it is possible to predict water quality of the Daejeon intake region in the future. Results from the sensitivity analysis showed that Chlorophyll-a was sensitive to variations in saturated growth rate of phytoplankton, endogenous respiration rate of phytoplankton, extinction coefficient and temperature. T-N was sensitive to mineralization rate of dissolved organic nitrogen and temperature. T-P was affected by T-P load, temperature, extinction coefficient, mineralization rate of dissolved organic phosphorus and saturated growth rate of phytoplankton. BOD was influenced by deoxygenation rate and temperature, and DO was influenced by temperature. Adequate input data was applied and assessed through the model sensitivity analysis. So it is possible to distinguish the input data which need careful attention when it has application to model.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.208-215
• /
• 2009

This study is to compare the accuracy of evaluation regarding the volume of the prostate, which three-dimensional volume rendering was produced the shape of protrusion, by measuring two kinds of craniocaudal length from the top of the protrusion and from the exclusion of the protrusion as the starting points. For the imaginary protrusion prostate models, total of 10 models were roughly made by using devils-tongue jelly and changing each of the 10 ml of capacity from 10 ml to 100 ml. For the protrusion prostate models aimed at estimating the real volume, through 64 cannel computed tomography (CT) and 3.0 tesla magnetic resonance image (MRI) were conducted by planimetry technique from three-dimensional volume rendering. And then we performed to evaluate on significance of these volumes by wilcoxon signed rank test. Also the obtained volumes data by ellipsoid volume formula were measured the volume of protrusion prostate models two times with each method using the two kinds of craniocaudal length from top of the protrusion and from exclusion of the protrusion as the starting points. Finally, the significance of differences using wilcoxon signed rank test was evaluated between the real volume by planimetry technique and the measured volume by ellipsoid volume formula from three-dimensional volume rendering. The average of the protrusion length on the models was $0.90{\pm}0.18\;mm$ in CT and was $0.75{\pm}0.11\;mm$ in MRI. There were not statistically significant difference between MRI and CT from the volume of protrusion prostate models (p=0.414). In MRI (p=0.139) and CT (p=0.057), there were not statistically significant difference between the real volume by planimetry technique and the measured volume by ellipsoid volume from exclusion of the protrusion as the starting points. While, there were statistically significant difference between the real volume by planimetry technique and the measured volume by ellipsoid volume from top of the protrusion as the starting points in MRI (p=0.005) and CT (p=0.005). For the accurate measurement of the protrusion prostate models, the craniocaudal length of the prostate should be measured from the exclusion of the protrusion as the starting points.

• Polymer(Korea)
• /
• v.37 no.2
• /
• pp.135-140
• /
• 2013

The stress relaxation of poly(methyl acrylate)-poly(acrylonitrile) copolymer samples was carried out in air, distilled water, pH 3, 7 and 11 solutions at various temperatures using a tensile tester equipped with a solvent chamber. The relaxation spectra of poly(methyl acrylate)-poly(acrylonitrile) copolymers were obtained by applying the experimental stress relaxation curves to the equation of relaxation spectrum derived from the Ree-Eyring and Maxwell model. The determination of relaxation spectra was performed from computer calculation using a Laplace transform method. It was observed that the relaxation spectra of these samples are directly related to the distribution of molecular weights and self-diffusions of flow segments.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.04a
• /
• pp.23-23
• /
• 2003

분말야금된 소결체의 가장 큰 특징 중의 하나는 피할 수 없는 소결체의 기공이다. 이러한 기공이 기계적 특성에 미치는 영향에 관해서는 많은 연구가 오래 전부터 진행되었었다. 그러나 기존의 연구는 거의 대부분 일반 분말야금에 의한 것이고 분말사출성형된 소결체의 기공율과 기계적 특성 광계는 거의 연구가 이루어 지지 않았다. 본 연구에서는 기공율의 조절이 용이한 분말사출성형 공정을 이용하여 소결 초기부터 완전 치밀화에 가까운 조직까지 다양한 소경율의 시편을 만들어 기계적 특성에 미치는 순수기공의 영향은 조사하기 위해 다음과 같이 조사하고자 하였다. 사출성형에 사용된 재료는 고강도 이며 내식성이 뛰어난 17-4 PH STS이고 평균 입경은 10mm였다. 열분해와 소결은 수소 분위기에서 행하였으며 소결온도는 900~$1350^{\circ}C$였다. 연구수행을 통해 다음과 같은 결론을 얻었다. 1. 기공율과 기계적 특성의 관계는 닫힌 기공이 지배하는 고밀도 영역과 열린 기공이 지배하는 저밀도 영역을 분리하여 해석해야한다. 2. 저밀도 영역에서의 기공율과 강도의 관계는 넥 성장에 따른 load bearing area의 증가로 나타낼 수 있고 아래와 같다. $\frac{\delta}{\delta_o}=1-\frac{P}{P_i}$ 3. 고밀도 영역에서의 기공율과 강도의 관계는 소결 현상과 초기 충진율을 고려한 ideal pore모델을 도입하였고 아래와 같이 나타났다. $\frac{\delta}{\delta_o}=1-1.95(P_i\;{\cdot}\;P)^{2/3}$

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.4
• /
• pp.242-253
• /
• 2020

Purpose: The aim of this study was to compare the accuracy of dies fabricated using 3D printing system to conventional method and to evaluate overall volumetric changes by arranging the superimposed surfaces. Materials and Methods: A mandibular right first molar from a dental model was prepared, scanned and fabricated with composites of polyetherketoneketone (PEKK). Master dies were classified into 4 groups. For the conventional method, the impression was taken with polyvinylsiloxane and the impression was poured with Type IV dental stone. For the 3D printing, the standard die was scanned and converted into models using three different 3D printers. Each of four methods was used to make 10 specimens. Scanned files were superimposed with the standard die by using 3D surface matching software. For statistical analysis, Kruskal-Wallis test and Mann-Whitney U test were done (P < 0.05). Results: Compared to the standard model, the volumetric changes of dies fabricated by each method were significantly different except the models fabricated by conventional method and 3D printer of Stereolithography (P < 0.05). The conventional dies showed the lowest volumetric change than 3D printed dies (P < 0.05). 3D printed dies fabricated by Stereolithography showed the lowest volumetric change among the different 3D printers (P < 0.05). Conclusion: The conventional dies were more accurate than 3D printed dies, though 3D printed dies were within clinically acceptable range. Thus, 3D printed dies can be used for fabricating restorations.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.3
• /
• pp.163-171
• /
• 2020

Currently, most of the mobile game market releases games through Google play and App Store, which have a high share. Because it uses a third-party platform, only the payment API system provided must be used, and third-party platform pays the game company after excluding certain fees. Because game companies do not know whether or not to refund items and cannot get back items through third party transactions, users and professional websites are continuously appearing that exploit refunds. In this thesis, after analyzing problems of existing payment method and presenting a payment model using blockchain smart contract, we analyzed differences from existing model in terms of transparency, decentralization(fee), efficiency, and as a result, payment model using smart contract has low commission through P2P transaction without third parties and transparent transaction record, preventing item forgery and refund. Later, the proposed payment model would lead to the culling of companies acting on behalf of refunds for words that deviate from moral ethics such as "Refund OK even with items" and resolve the problem of unreasonable fees that arise through third-party platforms.

• Electronics and Telecommunications Trends
• /
• v.8 no.4
• /
• pp.1-12
• /
• 1993

ATM 망 기술의 발전으로 BISDN 서비스를 공중망에서 제공하게 되면 LAN 의 충분한 보급으로 BISN 을 통한 LAN 간 연결은 첫번째 응용이 될 것이다. 본 고에서는 ATM 망과 LAN 사이에 연동할 IWU에서 고려해야 하는 문제점을 조사하고 이에 대한 해결 방안을 제시한다. 3 개의 연결형-비연결형 모델을 세워 비교 분석한 후 BISDN(Brodband Integrated Services Digital network)에서 비연결형 서비스 모델을 선정한다.이 모델은 BISDN에서 비연결형 서비스를 제공하는 것으로 Direct 방법과 Indirect 방법, AAL(ATM Adaptation Layer) 3/4와 AAL5 등을 비교 분석함으로써 OSI 에 따른 IWU 모델을 제안한다.