• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.462-470
• /
• 2018

본 연구는 종합병원 간호사의 업무몰입 관련 요인을 파악하고자 실시한 서술적 조사연구이다. 연구의 대상자는 D광역시와 K지역에 위치한 3개의 종합병원에 재직하고 있는 114명의 간호사이다. 수집된 자료는 IBM SPSS Statistics 25 프로그램을 사용하여 descriptive statistics, t-test, one-way ANOVA, Pearson's correlations, stepwise multiple regression으로 분석하였다. 본 연구에서 업무몰입의 평균평점은 3.08점이었으며, 감정노동 하부요인 중 전문직 감정조절 노력은 3.82점, 대상자 중심 감정 억제는 3.28점, 규범에 의한 감정 가장은 3.22점이었으며 간호근무환경은 2.59점이었다. 업무몰입은 감정노동 하부요인 중 전문직 감정조절 노력(r=.30, p=.001), 대상자 중심 감정 억제(r=.20, p=.030)와 유의한 양의 상관관계를 보였고, 간호근무환경과도 유의한 양의 상관관계(r=.21, p=.024)가 있는 것으로 나타났다. 업무몰입은 연령, 직위, 전문직 감정조절 노력과 관계가 있었으며 이들 세 변수는 업무몰입을 20%(F=10.37, p<.001)설명하였다. 따라서 업무몰입 향상을 위한 전략 수립 시 연령과 직위를 고려해야 하며, 감정노동이 발생할 수 있는 상황에서 전문직 감정조절 노력을 강화할 수 있는 전략을 찾는 노력이 이어져야 할 것이다.

• 한국BIM학회 논문집
• /
• 제3권3호
• /
• pp.9-18
• /
• 2013

In case of applying the BIM method in the civil engineering of irregularly shaped structure, BIM method began to be introduced in the current building engineering area compared with the expected effects of the relatively high construction productivity has been recognized. In this paper, I have developed quantity calculation algorithms applying it to earthwork and bridge construction, tunnel construction, retaining wall construction, culvert construction and implemented BIM based 3D-BIM Modeling quantity calculation. Structure work in which errors occurred in range between -6.28% ~ 5.17%. Especially, understanding of the problem and improvement of the existing 2D-CAD based of quantity calculation through rock type quantity calculation error in range of -14.36% ~ 13.07% of earthwork quantity calculation. It's benefit and applicability of BIM method in civil engineering. In addition, routine method for quantity of earthwork has the same error tolerance negligible for that of structure work. But, rock type's quantity calculated as the error appears significantly to the reliability of 2D-based volume calculation shows that the problem could be. Through the estimating quantity of earthwork based 3D-BIM, proposed method has better reliability than routine method. BIM, as well as the design, construction, maintenance levels of information when you consider the benefits of integration, the introduction of BIM design in civil engineering and the possibility of applying for the effectiveness was confirmed. In addition, as the beginning phase of information integration, quantity document automation program has been developed for activation of BIM. And automatically enter the program code number, linkage and manual volume calculation program, quantity document automation programs, such as the development is now underway, and step-by-step procedures and methods are presented.

• 한국산학기술학회논문지
• /
• 제7권1호
• /
• pp.57-62
• /
• 2006

본 논문에서는 3D 의복 착의 시뮬레이션에서 사용되는 3D 의복 모델을 제작하는 시스템을 제안한다. 착의 시뮬레이션을 하기 위해서는 3D 인체모델과 3D 의복 모델이 필요하다. 의복 모델을 디자인하기 위해서는 먼저 작업 Matrix 창을 생성하고 디자이너로부터 2D 피스(Piece)를 디자인한다. 디자인된 피스들을 박음질 선을 이용해 연결하고 마지막으로 디자인된 피스와 박음질 데이터를 사용해 수치 데이터를 생성하여 3D 의복 모델을 만든다. 본 논문에서 제안한 시스템에서는 피스 디자인 모듈, 의복 데이터 읽기/저장 모듈, 착의 시뮬레이션 모듈로 이루어져 있다.

• 근관절건강학회지
• /
• 제27권3호
• /
• pp.247-254
• /
• 2020

Purpose: This was a descriptive observational study examining the reasons for, frequency of, and factors affecting work interruption among intensive care unit (ICU) nurses. Methods: Convenience sampling was used to recruit 46 regular nurses who had been working in an ICU at D tertiary hospital in B metropolitan city for at least six months. To measure the degree of work interruption, this study revised a tool used by Brixey et al. (2007) for analyzing the type of work interruption. Results: A total of 1,787 work interruptions occurred during 368 hours of observation, i.e., at an average of 4.85 times per hour. Communication-related factors caused work interruption most frequently, followed by environmental, work-related, and personal factors. As for the work-related characteristics of nurses, participants experienced work interruption more frequently while working on weekdays, when the medical staff were stationed, than on weekends. Conclusion: ICU nurses experienced work interruption frequently. With the health care system expected to become more complicated in the future, efforts should be made to reduce unnecessary work interruptions to improve the operation efficiency of ICUs.

• 기술사
• /
• 제16권1호
• /
• pp.13-19
• /
• 1983

As one of staff members participated in the full course of the plant construction project of On-san Refinery to its successful completion. I had my past expierence that the plant construction project was so complicated, and a Long period required, and thus there were so money problems to be solved. Among the problem, I mainly noticed that the following listed points were solved and improved. 1. Each drawing should be in every accuracy possible. 2. Contract should be specified in every detail possible. 3. All invoiced prices of breack down list should be coped with the current market prices. 4. All execution of work should be in the most accuracy. A. Planing execution of work. B. Coordination with supervisor group. C. Economical method for execution of work. D. Safety control. 3, Calculation work field should be established seperately 6. Each staff members should be work at the best of his pride.

• 산업기술연구
• /
• 제19권
• /
• pp.173-178
• /
• 1999

In many areas of technology there are machines and systems controllable in up to six degrees of freedom. Helicopters and underwater vehicles, industrial robots are among the first representatives of this category. They need six degrees of freedom in order to move and orient within their workspace. An even broader and more explosively growing area is 3D computer graphics and virtual environment. In this work, functions of 3D input device are described and two types of commercial 3D input device are presented. Then, a preliminary experiment of a low cost 6 axis force/moment sensor is presented that can also be sued as a 3D input device. A low cost force/moment sensor and its application in robot teaching experiment is described. It computes the direction of 3 components of the force and 3 components of the moment applied by human holding the sensor by hand. The concept is shown by an experiment where the tool position and orientation of a robot in 3 dimensional space is controlled by the proposed sensor.

• 한국컴퓨터정보학회논문지
• /
• 제25권5호
• /
• pp.65-72
• /
• 2020

본 논문에서는, 지난 연구에서 제안한 D2D 전력제어 알고리즘의 성능 개선을 위하여, 채널추정 에러를 보상하는 세 가지 수정 D2D 전력제어 알고리즘을 제안한다. 또한, 제안하는 세 가지 수정 D2D 전력제어 알고리즘을 채널추정 에러 환경에서 성능평가를 진행한다. 실제 채널환경에서는 채널추정 에러가 빈번하게 발생한다. 지난 연구에서는 채널추정 에러가 없는 환경을 가정하고 제안된 D2D 전력제어 알고리즘이 채널추정 에러 환경에서 성능 문제가 있음을 확인하었다. 세 가지 수정 D2D 전력제어 알고리즘은 1)재전송, 2)신호대 간섭비 여유, 3)재전송과 신호대 간섭비 병합을 기반으로 한다. 실험 결과 재전송과 신호대 간섭비 병합기법이 채널추정 에러를 보상하는 데 소모하는 전송전력과 지연 관점에서 가장 좋은 성능을 보임을 확인하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제11권4호
• /
• pp.49-58
• /
• 2019

3D scanners are needed in various fields, and their usage range is greatly expanded. In particular, it is being used to reduce costs at various stages during product development and production. Now, the importance of quality inspection in the manufacturing industry is increasing. Structured optical system applied in this study is suitable for measuring high precision of mold, press work, precision products, etc. and economical and effective 3D scanning system for measuring inspection in manufacturing industry can be implemented. We developed Structured light 3D scanner which can measure high precision by using Digital Light Processing (DLP) projector and camera. In this paper, 3D image scanner based on structured optical system can realize 3D scanning system economically and effectively when measuring inspection in the manufacturing industry.

• 대한토목학회논문집
• /
• 제33권6호
• /
• pp.2509-2518
• /
• 2013

증강현실(Augmented Reality, AR) 기술은 현실 환경을 기반으로 컴퓨터에서 생성한 가상의 객체정보를 중첩해봄으로써 가상현실 상에서 느낄 수 없는 실감형 모델을 구현하는 기술이다. 본 연구에서는 토목공사 철근배근 작업에 증강현실 기술을 적용하는 방법론과 시스템 시제품을 구성하여 철근공사 작업의 증강현실 적용성을 검증하고 있다. 토목공사 현장의 여러 작업들 중에서 철근공사는 절차화된 매뉴얼방식보다는 숙련공의 경험적 방식에 의해 작업이 진행되는 대표적 공정이다. 이러한 공정에 증강현실을 적용하면 당초 계획도면과 비교하여 누락된 철근배근 및 상이한 배근 상태를 시각화하여 계측할 수 있으므로 시공성을 향상시킬 수 있다. 구축된 시스템은 3차원으로 모델링 된 철근객체를 실제 시공현장에 중첩하여 시각화함으로써 철근 조립공정들의 작업 이해도를 높이고, 검측단계에 활용함으로써 철근조립작업에서 발생할 수 있는 하자와 재작업으로 인한 비용증가를 억제할 수 있을 것이라 기대된다.

• 대한인간공학회지
• /
• 제23권4호
• /
• pp.35-43
• /
• 2004

The purpose of this study is to redesign a letter sorting station and to present the optimal work-space through the ergonomic analysis of the sorting station for reducing the 'Work-Related MusculoSkeletal Disorders(WMSDs)'. We surveyed the work environment in terms of the reason causing WMSDs. According to the survey results, Deltoid on the arm, Trapezius on the shoulder and Erector Spinae on the waist are most frequent attacking parts. Accordingly, We classified sorting stations by the horizontal work-space(Level 1, Level 2, Level 3) and the vertical work space(Level 1, Level 2) based on the criteria of ergonomic optimal work-space. In addition we improved the sorting station through investigation and analysis of the work-load regard the each defined work-space. In order to analyze the effect of the horizontal and vertical work-space, subjects carried out simulated sorting tasks. Each level(Level 1, Level 2, Level3) of the horizontal work-space is significant regarding each muscles(the shoulder, arm and waist), and each level(Level 1, Level 2) of the vertical work-space is significant regarding the arm and waist, but not shoulder. Finally, we founded the difference of work-load according to the work-spaces. Then, it is necessary to improve the work-space causing the high work-load(Level 3 of the horizontal work-space). Then, this study presented the specification of a sorting station which is suitable to the korean body size, and constructed the 3D shaped model of the stations by the ergonomic analysis.