• 한국음향학회지
• /
• 제27권2호
• /
• pp.92-101
• /
• 2008

다층 모델이 갖는 문제점을 해소하고, 2층 모델의 지나친 간결성을 보완하기 위해 유체-유체-탄성체로 이루어진 3층 모델을 가정하였다. 일반적으로 퇴적층의 두께가 10파장 이상인 경우, 수층 내의 음장에 대한 암반층의 영향을 무시할 수 있다고 알려져 왔는데, 음장의 계산결과와 실험결과간의 최대 상관계수을 추적하는 방법을 통해 그 같은 조건이 보다 구체화 할 수 있음을 확인하였다. 최대 상관계수를 구하기 위해 단일센서로부터 얻어진 전달손실을 사용하였다. 음속이 1813m/s인 퇴적층을 가정할 경우 50 kHz에서 120 kHz 간의 주파수 범위에서 2층모델로 전환되는 조건은 2.5파장내지 7.7파장 범위에 존재하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제8권3호
• /
• pp.8-12
• /
• 2003

The centrifuge test result on capped sediment was compared to the advection- dispersion equation proposed for one layered to predict contaminant transport parameters. The fitted contaminant transport parameters for the centrifuge test results were one to three orders of magnitude greater than the estimated parameters from the advection-dispersion equation. This indicates that the centrifuge model over estimated the contaminant transport phenomena. Thus, the centrifuge provides a non-conservative approach to modeling contaminant transport. It should be also noted that the advection-dispersion equation used in this study is a one layered model. Two layered modeling approaches are more appropriate for modeling this data since there are two layers with different partitioning coefficients. Further research is required to model the centrifuge test using two-layered advection-dispersion models.

• 한국음향학회지
• /
• 제20권4호
• /
• pp.71-80
• /
• 2001

2개 층으로 구성된 페커리스 (Pekeris) 모델에 해저퇴적층의 영향을 고려하기 위해 1개의 퇴적층을 증가시킨 2개의 해저층으로 구성된 3층의 유체모델을 가정하고 원통형 좌표계에서 그린 (Green)함수와 경계조건, 좀머펠트 (Sommerfeld) 방사조건 등을 적용하여 해를 구했다. 모드는 불연속 (discrete)모드와 가상 (virtual)모드로 구분하여 구했으며 유도된 불연속모드 산출 관계식은 Tolstoy와 Clay의 정규 (normal)모드 생성방정식과 일치함을 확인하였다. 또한, 환경조건을 페커리스 모델의 조건과 유사하도록 조절하여 시뮬레이션을 수행한 결과, 동일한 결과를 보임을 통해 유도된 수식이 조건에 따라서는 페커리스 모델로 환원됨을 확인하였다. 따라서 본 모델이 근거리 음장내의 가상모드에 대한 퇴적층의 영향 연구에 사용될 수 있다고 판단된다.

• ETRI Journal
• /
• 제43권3호
• /
• pp.524-537
• /
• 2021

High-performance Linpack (HPL) is among the most popular benchmarks for evaluating the capabilities of computing systems and has been used as a standard to compare the performance of computing systems since the early 1980s. In the initial system-design stage, it is critical to estimate the capabilities of a system quickly and accurately. However, the original HPL mathematical model based on a single core and single communication layer yields varying accuracy for modern processors and accelerators comprising large numbers of cores. To reduce the performance-estimation gap between the HPL model and an actual system, we propose a mathematical model for multi-communication layered HPL. The effectiveness of the proposed model is evaluated by applying it to a GPU cluster and well-known systems. The results reveal performance differences of 1.1% on a single GPU. The GPU cluster and well-known large system show 5.5% and 4.1% differences on average, respectively. Compared to the original HPL model, the proposed multi-communication layered HPL model provides performance estimates within a few seconds and a smaller error range from the processor/accelerator level to the large system level.

• 한국정보통신학회논문지
• /
• 제15권4호
• /
• pp.921-929
• /
• 2011

본 논문에서는 모바일 WiMAX용 layered LDPC(low-density parity-check) 복호기의 복호성능 및 복호 수렴속도 분석을 통해 LDPC 복호기의 하드웨어 구현을 위한 최적의 설계조건을 탐색하였다. 최소합 알고리듬과 layered 복호방식을 적용한 LDPC 복호기의 고정소수점 Matlab 모델을 개발하고 시뮬레이션 하였다. IEEE 802.16e 표준에 제시된 블록길이 576, 1440, 2304 비트와 부호율 1/2, 2/3A, 2/3B, 3/4A, 3/4B, 5/6에 대해 고정소수점 비트 폭, 블록길이, 부호율 등이 복호성능에 미치는 영향을 분석하였으며, 고정소수점 비트 폭이 8 비트 이상이고 정수부분이 5 비트 이상일 때 안정된 복호성능이 얻어짐을 확인하였다.

• 한국시뮬레이션학회논문지
• /
• 제26권3호
• /
• pp.105-113
• /
• 2017

본 연구는 대공위협에 대한 생존성 향상을 위한 다층 대공방어 체계의 최적 투자 계획 모델을 고려한다. 최적화 모델 수립을 위해 다층 대공방어 체계를 네트워크 모델로 표현하고, 가용 예산이 제한되어 있는 상황 하에서 대응실패 확률을 최소화하기 위해 각 방어무기에 대하여 투자여부를 결정하는 모델과 연속적인 투자가 가능한 모델을 각각 제시한다. 비선형 형태의 목적함수를 로그함수를 통해 선형화하였으며, 제시된 최종 모델의 해법으로서 동적계획법 알고리즘과 선형계획법을 제안한다. 가상의 다층 대공 방어 상황을 설정한 후, 두 가지의 최적화 모델에 대한 최적해를 도출하고 그 결과를 분석하였다. 이는 다층 대공방어 체계의 신뢰도 향상을 위한 효과적인 투자 계획 수립의 필요성 및 접근방법을 제시한다.

• 한국군사과학기술학회지
• /
• 제3권2호
• /
• pp.35-41
• /
• 2000

A modified theoretical analysis of the ballistic perforation on the double and multi-layered armour plates using an upper bound method has been presented in this paper. A modified model based on the suggestion of the Awerbuch-bodner model has been adapted and extended into double and multi-layered armour plates when the plugging type of penetration has been occurred. The residual projectile speed, ballistic limit velocity and contact time during the penetration process have been derived from the equation of motion at each stage.

• Advanced Composite Materials
• /
• 제17권3호
• /
• pp.191-214
• /
• 2008

Polypropylene/layered silicate nanocomposites containing maleic anhydride grafted polypropylene were prepared by melt compounding and their rheological behavior was investigated in shear flow. Transient and steady shear flows were simulated numerically by using the K-BKZ integral constitutive equation along with experimentally determined damping functions under dynamic oscillatory and step strain shear flows. Nonlinear shear responses were predicted with the K-BKZ constitutive equation using two different damping functions such as the Wagner and PSM models. It was observed that PP-g-MAH compatibilized PP/layered silicate nanocomposites have stronger and earlier shear thinning and higher steady shear viscosity than pure PP resin or uncompatibilized nanocomposites at low shear rate regions. Strong damping behavior of the PP/layered silicate nanocomposite was predicted under large step shear strain and considered as a result of the strain-induced orientation of the organoclay in the shear flow. Steady shear viscosity of the pure PP and uncompatibilized nanocomposite predicted by the K-BKZ model was in good agreement with the experimental results at all shear rate regions. However, the model was inadequate to predict the steady shear viscosity of PP-g-MAH compatibilized nanocomposites quantitatively because the K-BKZ model overestimates strain-softening damping behavior for PP/layered silicate nanocomposites.

• 전기학회논문지P
• /
• 제62권3호
• /
• pp.139-144
• /
• 2013

In Korea, where most of the sites are narrow in space and their earth resistivity is relatively high, the spaces between grounding conductors are likely to be designed narrow in order to lower ground resistance and dangerous voltage below to the permitted safety values. In addition, ground nets are in the shape of square or rectangle depending on the location and size of the facilities and ground contact area, and inner conductors are laid out in grids like the pattern of nets. Nevertheless, with the existing designs, the marginal voltage for safety gets higher as the area is extended further outside, in comparison with that of inner mesh grounding, thus causing much difficulty maintaining them equipotential, and there exist limits in the burial, grounding grid design considering the dangerous voltage of muti-layered model in the constrained sites, was studied.

• 콘크리트학회논문집
• /
• 제11권5호
• /
• pp.131-137
• /
• 1999

The use of higher strength materials with the strength methed of design has resulted in more slender member and shallower sections. For this reason, it is necessary to satisfy the requirements of serviceability even though the structural safety is the most important limit state. This paper is only concerned with the control of deflections in the serviceability. In this study, an analytical model is presented to predict the deflections of reinforced concrete beams to given loading and environmental conditions. This model is based on the finite element approach in which a finite element is generally divided into a number of stiffening effect due to cracking, creep and shrinkage. Comparisons are made with available measured deflections reported by others to assess the capability of the layered beam model. The calculated values of instantaneous and long-term deflection show good agreement with experimental results in the range of tension stiffening parameter $\beta$ between 2.5 and 3.0.