DOI QR코드

DOI QR Code

제한된 부지 다층 대지구조에서 위험전압을 고려한 접지설계

Grounding Grid Design Considering the Dangerous Voltage of Multi-layered Model in the Constrained Sites

  • 손석금 (오산대학교 전기시스템제어과)
  • 투고 : 2013.07.26
  • 심사 : 2013.08.27
  • 발행 : 2013.09.01

초록

In Korea, where most of the sites are narrow in space and their earth resistivity is relatively high, the spaces between grounding conductors are likely to be designed narrow in order to lower ground resistance and dangerous voltage below to the permitted safety values. In addition, ground nets are in the shape of square or rectangle depending on the location and size of the facilities and ground contact area, and inner conductors are laid out in grids like the pattern of nets. Nevertheless, with the existing designs, the marginal voltage for safety gets higher as the area is extended further outside, in comparison with that of inner mesh grounding, thus causing much difficulty maintaining them equipotential, and there exist limits in the burial, grounding grid design considering the dangerous voltage of muti-layered model in the constrained sites, was studied.

키워드

참고문헌

  1. 한국전기안전공사, "IEC60364 건축전기설비 해설서", 2006. 11.
  2. 김재철외 , IEC 60364 기반 접지계통 비교 분석, 한국조명전기 설비학회, Vol. 24 No. 1, 2010 https://doi.org/10.5207/JIEIE.2010.24.1.056
  3. 대한전기학회, 한국전기연구원, "수배전전력계통 접지계통과 인체 및 기기의 안전성에 관한연구(기술논문자료)", 2006.11.
  4. ANSI/IEEE Std. 80-1986, "IEEE Guide for Safety in AC Substaion Grounding", Institute of Electrical and Electronics Engineers, Inc, New York. 1986
  5. ANSI/IEEE Std. 80-2000, "IEEE Guide for Safety in AC Substaion Grounding", Institute of Electrical and Electronics Engineers, Inc, New York. 2000
  6. 신복성외, 위험전압 검토에 따른 개선된 접지설비 모델, 한국조명전기설비학회, Vol. 22 No.4, 2008 https://doi.org/10.5207/JIEIE.2008.22.4.068
  7. IEEE Power Enginnering Society, "IEEE Guide for safety in AC Substation Grounding: IEEE Std.80-2000" August, 2000.
  8. 이복희외, "접지의 핵심 기초 기술", 의제, 2002
  9. 김태훈외, "접지제원 변화에 따른 사선 메쉬접지의 특성변화", 한국조몀전기설비학회논문집, pp347-350, 2009
  10. 손석금외, 위험전압 검토에 의한 메시접지설계, 대한전기학회, Vol. 60P, No. 3, 2011 https://doi.org/10.5370/KIEEP.2011.60.3.120
  11. 손석금 외, 변전소 접지설계를 위한 접지전극 주변의 위험전압 측정과 분석, 대한전기학회, Vol. 60P, No. 4, 2011 https://doi.org/10.5370/KIEEP.2011.60.4.214
  12. 손석금 외, 제한된 부지에서 위험전압 검토에 의한 메시 접지설계, 한국조명전기설비학회, Vol. 25, No. 11, 2011 https://doi.org/10.5207/JIEIE.2011.25.11.091
  13. 고교건언저, 이형수역, 동일출판사, 接地設計入聞 1993
  14. 다카하시 다케히코, 정종욱 옮김, 일본 옴사-성안당, 접지.등전위 본딩 설계 실무지식, 2008.
  15. 손이조, IEC 60364 전기설계감리 시공가이드북, 기다리, 2009
  16. 손이조, 세홍이엔씨, "전력계통해석 프로그램"