• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.463-471
• /
• 2006

Electrical resistivity surveys were conducted at areas of abandoned landfills in Cheonan and Wonju. Geology and extent of leachate migration around the landfills were evaluated with collected resistivity data by 2-D and 3-D resistivity inverse modeling. The Cheonan landfill is located above the paddy fields and the resistivity survey lines were crossed to examine possible pollution at the paddy fields by leakage of the landfill leachate. In Wonju, the landfill and the downgradient paddy fields are divided by a concrete barrier wall. At the bottom of the landfill, there is a leachate settlement system, which has not been in operation. To evaluate leachate leakage into the paddy fields, a total of 4 survey lines were used. According to the resistivity survey results, the landfill leachate in Cheonan appeared to be restricted only within the interior of the landfill, not to migrate into the subsurface of the paddy fields. These results are well consistent with electrical conductivity values of groundwaters obtained from a periodic analysis of water qualities. In Wonju, however, it was inferred that the leachate emanating from the landfill migrated beneath the abandoned leachate settlement system and the leachate would reach the downgradient paddy fields. Low resistivity area was observed in the old reservoir area and it appeared to be derived from convergence of groundwater flows from the surrounding valley and the moist wet land. In addition, groundwater flow into the paddy fields occurs beneath the old reservoir embankment at depths of $7{\sim}8m$. This paper reports details of the resistivity surveys for the uncontrolled landfills.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.1-11
• /
• 2021

Lately, the Korean Government has gradually expanded participation by local residents who are users of the area in the smart city project for the construction of region specialization smart city service (hereinafter called "Smart Service") and the enhancement in the citizen's awareness. However, due to the lack of information on smart service-related technology, there has been a limitation in getting the specific opinion of citizens in the process of designing the Smart Service. In this study, reports made by 4 four local governments which were selected for implementation of 2019 "Smart Town Challenge Projects" were reviewed to diagnose the actualization level of the smart service suggested by citizens through the living lab. The analysis results show that though the smart service plan was established by using diverse design thinking methodology through the living lab, there was a limitation in having citizens design the specific functions of the smart service. So, this study suggests the function issue card technique which can be used by modulating and freely combining four elements such as information collection, processing, supplying method and technique of the smart service and the service contents. This function issue card technique was directly applied to the living lab of the smart city project to verify its effectiveness. It was found that through this technique, citizens can combine the functions and contents of the smart service to materialize smart services at the level of detailed functions. The function issue card technique suggested in this study is expected to contribute to the actualization of opinions for the role of citizens as co-creators in solving local problems in the citizen participation type smart city plan in the future, thus helping the design of the regional specialization smart service.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.52 no.2
• /
• pp.51-63
• /
• 2024

While the government policy to fully adopt BIM in the construction sector is being implemented, the construction and utilization of landscape BIM models are facing challenges due to problems such as limitations in BIM authoring tools, difficulties in modeling natural materials, and a shortage in BIM content including libraries. In particular, plants, fundamental design elements in the field of landscape architecture, must be included in BIM models, yet they are often omitted during the modeling process, or necessary information is not included, which further compromises the quality of the BIM data. This study aimed to contribute to the construction and utilization of landscape BIM models by developing a plant library that complies with BIM standards and is applicable to the landscape industry. The plant library of trees and shrubs was developed in Revit by modeling 3D shapes and collecting attribute items. The geometric information is simplified to express the unique characteristics of each plant species at LOD200, LOD300, and LOD350 levels. The attribute information includes properties on plant species identification, such as species name, specifications, and quantity estimation, as well as ecological attributes and environmental performance information, totaling 24 items. The names of the files were given so that the hierarchy of an object in the landscape field could be revealed and the object name could classify the plant itself. Its usability was examined by building a landscape BIM model of an apartment complex. The result showed that the plant library facilitated the construction process of the landscape BIM model. It was also confirmed that the library was properly operated in the basic utilization of the BIM model, such as 2D documentation, quantity takeoff, and design review. However, the library lacked ground cover, and had limitations in those variables such as the environmental performance of plants because various databases for some materials have not yet been established. Further efforts are needed to develop BIM modeling tools, techniques, and various databases for natural materials. Moreover, entities and systems responsible for creating, managing, distributing, and disseminating BIM libraries must be established.

• The Journal of Small Business Innovation
• /
• v.19 no.2
• /
• pp.53-68
• /
• 2016

Motivation and activities for technological learning, entrepreneurship, innovation, and creativity are driving forces of economic development in Asian countries. In the early stages of technological development, technological learning and entrepreneurship are efficient ways in which to catch up with advanced countries because firms can accumulate skills and knowledge quickly at relatively low risk. In the later stages of technological development, however, innovation and creativity become more important. This study aims to identify a) the factors (learning capabilities) that influence technological learning performance and b) barriers to enhancing innovation capabilities for the creative economy and organizations. The major part of this study is related to learning capabilities in the post-catch-up era. Based on a literature review and observations from Korean experiences, this study proposes a technological learning model composed of various influencing factors on technological learning. Three hypotheses are derived, and data are collected from Korean machine tool manufacturers. Intense interviews with CEOs and R&D directors are conducted using structured questionnaires. Statistical analysis, such as correlation and ANOVA are then carried out. Furthermore, this study addresses how to enhance innovation capabilities to move forward. Innovation enablers and barriers are identified by case studies and policy analysis. The results of the empirical study identify several levels of firms' learning capabilities and activities such as a) stock of technology, b) potential of technical labor, c) explicit technological efforts, d) readiness to learn, e) top management support, f) a formal technological learning system, g) high learning motivation, h) appropriate technology choice, and i) specific goal setting. These learning capabilities determine firms' learning performance, especially in the early stages of development. Furthermore, it is found that the critical factors for successful technological learning vary along the stages of technology development. Throughout the statistical and policy analyses, this study confirms that technological learning can be understood as an intrinsic principle of the technology development process. Firms perform proactive and creative learning in the late stages, while reactive and imitative learning prevails in the early stages. In addition, this study identifies the driving forces or facilitating factors enhancing innovation performance in the post catch-up era. The results of the preliminary case studies and policy analysis show some facilitating factors such as a) the strategic intent of the CEO and corporate culture, b) leadership and change agents, c) design principles and routines, d) ecosystem and collaboration with partners, and e) intensive R&D investment.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.151-162
• /
• 2007

How can new media devices and networks provide an effective response to the world's growing sector of cultural and historically-minded travelers? This study emerged from the question of how mobile handsets can change the nature of cultural and historical tourism in ubiquitous city environments. As wireless network and mobile IT have rapidly developed, it becomes possible to deliver cultural and historical information on the site through mobile handset as a tour guidance system. The paper describes the development of a new type of mobile tourism platform for site-specific cultural and historical information. The central objective of the project was to organize this cultural and historical walking tour around the mobile handset and its unique advantages (i.e. portability, multi-media capacity, access to wireless internet, and location-awareness potential) and then integrate the tour with a historical story and role-playing game that would deepen the mobile user's interest in the sites being visited, and enhance his or her overall experience of the area. The project was based on twelve locations that were culturally and historically significant to Korean War era in Busan. After the mobile tour game prototype was developed for this route, it was evaluated at the 10th PIFF (Pusan International Film Festival). After use test, some new strategies for developing mobile "edutainment content" to deliver cultural historical contents of the location were discussed. Combining 'edutainment' with a cultural and historical mobile walking tour brings a new dimension to existing approaches of the tourism and mobile content industry.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.41-48
• /
• 2018

The aim of this study is to provide foundational knowledge of how to enhance the user satisfaction of urban parks. The study seeks to identify essential factors that influence user satisfaction and to provide better design strategies for future park design as well as the reorganization of existing ones. To measure user satisfaction, this study used factor analysis to extract essential factors - facility conditions, landscape and scenery, safety, and kindness - by using data from a survey conducted by the city of Seoul in 2017. We then used a regression analysis to infer causal relationships between the independent variables and the dependent variables (user satisfaction). The results revealed that the most significantly and positively related variable to user satisfaction in urban parks was safety (${\beta}=0.276$, p<.000), followed by landscape and scenery (${\beta}=0.230$, p<.000), facility conditions (${\beta}=0.215$, p<.000), and kindness (${\beta}=0.208$, p<.000). The results indicate that, for future urban park designs, planners and designers should prioritize the issues of safety by adopting crime prevention through environmental design (CPTED). In addition, planners and designers of future park designs should heavily weigh the selection and provision of relevant facilities for the intended use as well as well-arranged and well-managed plants and trees. Based on the results of IPA analysis, the most urgent improvement elements appeared to be the factor of kindness; however, the impact of kindness influencing user satisfaction was less important than that of safety and landscape and scenery in the urban park design processes. This study demonstrates that to maximize the user satisfaction of the urban park design processes and to provide more valuable spaces for users, it is necessary to secure park safety and to create well-composed landscape and scenery. Future research should provide more detailed and specified urban park design strategies corresponding with the importance of the factors identified in this study.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.6
• /
• pp.25-38
• /
• 2020

The objective of this study is to propose a direction for creating a memorial park for the 250 students victims of the Sewol ferry disaster. To this end, this study first attempted to understand the matters discussed at various levels to create a memorial park and find a way that the park can be built by gathering opinions from the bereaved families and the victims themselves, as well as local residents, and experts. Workshops, competitions, special lectures, and websites, etc, were analyzed. A social discourse analysis methodology was used for systematic analysis, and the analyzed discourse was categorized into 4 types for assessment, and the functions and roles were subdivided into 15 types. To assess the priorities and the adequacy of the discourse, an analytic hierarchy process (AHP) was used among 30 activists, public servants, and experts. Then, a survey was conducted to analyze the perception of the residents (467 participants including the bereaved families) about the memorial park. Based on the results of the analysis, two directions were set for the memorial park. First, is a memorial park to remember the victims in everyday life. It must be a park with various cultural contents instead of a conventional memorial park that is solemn and grave sharing anguish and sorrow. The memorial park for the Sewol ferry disaster must become a space where visitors can naturally encounter and remember the victims. Second, is a park that serves as a catalyst that brings change and innovation to the community. It must be able to bring change to the community with direct and indirect influence. It must serve as an impetus to bring change and innovation to the community in the mid-to-long-term. Having many visitors may also lead to an economic effect. These visitors may not just stay in the park, but even contribute to revitalizing the local businesses. The purpose of this study is to apply the research findings to guide the International Design Competition scheduled for 2020 and serve to establish guidelines for a continuous park management system.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.1
• /
• pp.72-105
• /
• 2011

This study explores the value of the Dicentra spectabilis community as a nature reserve in provincial forests at San 1-2, Daea-ri, Dongsang-myeon, Wanju-gun, Jellabuk-do, also known as Gamakgol, while defining the appropriateness of its living environment and eventually providing basic information to protect this area. For these reasons, we investigated 'morphological and biological features of Dicentra spectabilis' and the 'present situation and problems of designing a herbaceous nature reserve in Korea.' Furthermore, we researched and analyzed the solar, soil and vegetation condition here through a field study in order to comprehend its nature reserve value. The result is as follows. According to the analytic result for information on the domestic wild Dicentra spectabilis community, it is evenly spread throughout mountainous areas, and there is one particularly outstanding in size in Wanju Gamakgol. Upon the findings from literature and the field study about its dispersion, Gamakgol has been discovered as an ideal district for Dicentra spectabilis since it meets all the conditions this plant requires to grow vigorously, such as a quasi-high altitude and rich precipitation during its period of active growth duration in May. Dicentra spectabilis grows in rocky soil ranging from 300~375m above sea level, 344.5m on average, towards the north, northwest and dominantly in the northeast. The mean inclination degree is $19.5^{\circ}$. Also, upon findings from analyzing solar conditions, the average light intensity during its growth duration, from Apr. to Aug., is 30,810lux on average and it tends to increase, as it gets closer to the end. This plant requires around 14,000~18,000lux while growing, but once bloomed, fruits develop regardless of the degree of brightness. The soil pH has shown a slight difference between the topsoil, at 5.2~6.1, and subsoil, at 5.2~6.2. Its mean pH is 5.54 for topsoil and 5.58 for subsoil. These results are very typical for Dicentra spectabilis to grow in, and other comparative areas also present similar conditions. Given the facts, the character of the soil in Gamakgol has been evaluated to have high stability. Analysis of its vegetation environment shows a wide variation of taxa numbering from 13 to 52 depending on area. The total number of taxa is 126 and they are a homogenous group while showing a variety of species as well. The Dicentra spectabilis community in the Daea-ri Arboretum is an herbaceous community consisting of dominantly Dicentra spectabilis, Cardamine leucantha, Boehmeria tricuspi and Impatiens textori while having many differential species such as Impatiens textori, Pueraria thunbergiana, Rubus crataegifolius vs Staphylea bumalda, Securinega suffruticosa, and Actinidia polygama. It suggests that it is a typical subcolony divided by topographic features and soil humidity. Considering the above results on a comprehensive level, this area is an excellent habitat for wild Dicentra spectabilis providing beautiful viewing enjoyment. Additionally, it is the largest wild colony of Dicentra spectabilis in Korea whose climate, topography, soil conditions and vegetation environment can secure sustainability as a wild habitat of Dicentra spectabilis. Therefore, We have determined that the Gamakgol community should be re-examined as natural asset owing to its established habitat conditions and sustainability.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.6
• /
• pp.614-629
• /
• 2001

As the information-intensive society in 21c based on the environment of global internet is promoted, the software is getting more large and complex, and the demand for the software is increasing briskly. So, it becomes an important issue in academic and industrial field to activate reuse by developing and exchanging the standardized component. Currently, the information services as a product type of each company are provided in foreign market place for reusing a commercial component, but the components which are serviced in each market place are different, insufficient and unstandardized. That is, construction for Component Data Registry based on ISO 11179, is not accomplished. Hence, the national government has stepped up the plan for sending out public component at 2001. Therefore, the systems as a tool for sharing and exchange of data, have to support the meta-information of standardized component. In this paper, we will propose the C_MDR system: a tool to register and manage the standardized meta-information, based upon ISO 11179, for the commercialized common component. The purpose of this system is to systemically share and exchange the data in chain of acceleration of reusing the component. So, we will show the platform of specification for the component meta-information, then define the meta-information according to this platform, also represent the meta-information using XML for enhancing the interoperability of information with other system. Moreover, we will show that three-layered expression make modeling to be simple and understandable. The implementation of this system is to construct a prototype system of the component meta-information through the internet on www, this system uses ASP as a development language and RDBMS Oracle for PC. Thus, we may expect the standardization of the exchanged component metadata, and be able to apply to the exchanged reuse tool.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.19-26
• /
• 2008

This paper is related to a new technology allowing a user to have a 360 degree viewpoint of the virtual wearing object, and to an object VR(Virtual Reality)-based 2D virtual textile wearing system using viewpoint vector estimation and textile texture mapping. The proposed system is characterized as capable of virtually wearing a new textile pattern selected by the user to the clothing shape section segmented from multiview 2D images of clothes model for object VR, and three-dimensionally viewing its virtual wearing appearance at a 360 degree viewpoint of the object. Regardless of color or intensity of model clothes, the proposed system is possible to virtually change the textile pattern with holding the illumination and shading properties of the selected clothing shape section, and also to quickly and easily simulate, compare, and select multiple textile pattern combinations for individual styles or entire outfits. The proposed system can provide higher practicality and easy-to-use interface, as it makes real-time processing possible in various digital environment, and creates comparatively natural and realistic virtual wearing styles, and also makes semi -automatic processing possible to reduce the manual works to a minimum. According to the proposed system, it can motivate the creative activity of the designers with simulation results on the effect of textile pattern design on the appearance of clothes without manufacturing physical clothes and, as it can help the purchasers for decision-making with them, promote B2B or B2C e-commerce.