• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1649-1650
• /
• 2006

반도체 소자의 선폭이 나노미터 스케일로 진입함에 따라 소자의 물리적 특성을 나노미터 스케일에서 정밀하게 측정하고자 하는 요구가 증대되고 있다. Atomic Force Microscopy (AFM)은 나노미터 이하의 해상도를 가지고 물질 표면의 기하하적, 전기적 특성 등을 측정할 수 있으므로 나노소자 연구에 필수적인 도구가 되었다. 그러나 AFM은 낮은 측정속도와 탐침의 기하학적 형상에 의한 AFM 영상의 왜곡 등과 같은 치명적인 단점도 가지고 있다. AFM의 낮은 측정 속도를 개선하기 위해서 진보된 마이크로머시닝기술을 이용하여 캔틸레버의 크기를 줄이거나 캔틸레버 위에 박막 구동기를 집적시키는 등의 노력이 진행되고 있으나, 이 경우 전통적인 식각 공정을 이용하여 캔틸레버 위에 tip을 형성하는 것이 매우 어렵다. 본 연구에서는 이미 제작된 캔틸레버 위에 전자빔 조사법을 이용하여 탄소상 tip을 직접 성장시킴으로써 전통적인 식각 공정에 비해 매우 간단하고 값싸며, 활용도가 높은 공정을 개발하였다. 탄소상 tip 성장에 필요한 탄소 소스는 dipping 방법을 이용하여 공급하였고, 시분할법을 사용하여 캔틸레버의 원하는 위치에 tip을 성장시킬 수 있었다. 이렇게 제작된 tip은 최대 $5{\mu}m$ 높이까지 가능했으며, 종횡비는 10:1 이상이어서 tip의 형상에 의한 AFM 영상 왜곡 현상을 최소화할 수 있을 것으로 기대된다.

• Composites Research
• /
• v.31 no.6
• /
• pp.429-434
• /
• 2018

We investigate strain transmissions of a surface bonded distributed optical fiber sensor considering strain variation according to positions. We first derive a strain transmission ratio depending on a wavelength of a strain distribution of the host structure from an analysis model. The strain transmission ratio is compared with numerical results obtained from the finite element method using ABAQUS. We find that the analytical results agree well with the numerical results. The strain transmission ratio is a function of a wavelength, i.e. the strain transmission ratio decreases (increases) as the wavelength of the host strain decreases (increases). Therefore, if an arbitrary strain distribution containing various wavelengths is given to a host structure, a distorted strain distribution will be observed in the distributed optical fiber sensor compare to that of the host structure, because each wavelength shows different strain transmission ratio. The strain transmission ratio derived in this study will be useful for accurately identifying the host strain distribution based on the signal of a distributed optical fiber sensor.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.1
• /
• pp.117-126
• /
• 2008

In this paper, it is presented a digital image processing method and the program (Visual C++) to determine the shape of the suspension bridge. To investigate the precision of this method, a suspension bridge is divided into 5, 13 and 19 images, respectively, by using the 6.3M pixels digital camera with 300mm zoom lens. Obtained results of the Kwang-Ahn Grand Bridge by using this method are fairly close to the real precision surveyed data. The accuracy is more improved by increasing the number of divided images of the structure. The total cost, man power and time of field survey by this method presented in this study could be much more reduced and the developed program could be applied with little modification for other structures like cable-stayed bridges, if lens compensation algorithms and program access capabilities are improved.

• The KIPS Transactions:PartD
• /
• v.9D no.5
• /
• pp.925-930
• /
• 2002

This paper discusses techniques for embedding data into 3D polygonal models of geometry. Much researches of Watermarking had been gone as element technology of DRM (digital rights management). But, few research had gone to 3D polygonal model. Most research is limited at text document, 2D image, animation, music etc. RP system is suitable a few production in various goods species, and it is used much in industry to possible reason that produce prototype and find error or incongruent factor at early stage on design in product development childhood. This paper is research about method that insert watermark in STL ( stereolithography) file that have 3D shape model. Proposed algorithm inserts watermark in normal vector region and facet's interior region of 3D shape data. For this reason, 3D shape does not produce some flexure and fulfill invisibility of watermark. Experiment results that insert and extract watermark in normal netter region and facet's Interior region of 3D shape data by proposed algorithm do not influence entirely in 3D shape and show that insertion and extraction of watermark are possible.

• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.504-508
• /
• 2003

We present a new point-diffraction interferometer, which has been devised for the three-dimensional profile measurement of light scattering rough surfaces. The interferometer system has multiple sources of two-point-diffraction and a CCD camera composed of an array of two-dimensional photodetectors. Each diffraction source is an independent two-point-diffraction interferometer made of a pair of single-mode optical fibers, which are housed in a ceramic ferrule to emit two spherical wave fronts by means of diffraction at their free ends. The two spherical wave fronts then interfere with each other and subsequently generate a unique fringe pattern on the test surface. A He-Ne source provides coherent light to the two fibers through a 2${\times}$l optical coupler, and one of the fibers is elongated by use of a piezoelectric tube to produce phase shifting. The xyz coordinates of the target surface are determined by fitting the measured phase data into a global model of multilateration. Measurement has been performed for the warpage inspection of chip scale packages (CSPs) that are tape-mounted on ball grid arrays (BGAs) and backside profile of a silicon wafer in the middle of integrated-circuit fabrication process. When a diagonal profile is measured across the wafer, the maximum discrepancy turns out to be 5.6 ${\mu}{\textrm}{m}$ with a standard deviation of 1.5 ${\mu}{\textrm}{m}$.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.4
• /
• pp.41-52
• /
• 2014

In this paper, O-ring size measurement algorithm based on a small machine vision inspection equipment which can replace a expensive and large machine vision inspection equipment is presented. The small machine vision inspection equipment acquires a image from a CCD camera shooting a measurement plane which located on a back light and the proposed size measurement algorithm is apply to the image. For improvement of size measurement accuracy, camera lens distortion correction and perspective distortion correction are conducted by software technique. Consider O-ring's shape, ellipse fitting model is applied. In order to increase the reliability of ellipse fitting, RANSAC algorithm is applied.

• Journal of Broadcast Engineering
• /
• v.23 no.6
• /
• pp.896-913
• /
• 2018

Seam finding algorithm is one of the most important techniques to construct the high quality 360 VR image. We found that some degradations, such as ghost effect, are generated when the conventional seam finding algorithms (for examples, Voronoi algorithm, Dynamic Programming algorithm, Graph Cut algorithm) are applied, because those make the inefficient masks which cross the body of main objects. In this paper, we proposed an advanced seam finding algorithm providing the efficient masks which go through background region, instead of the body of objects. Simulation results show that the proposed algorithm outperforms the conventional techniques in the viewpoint of the quality of the stitched image.

• Journal of the Korean Magnetics Society
• /
• v.26 no.1
• /
• pp.24-30
• /
• 2016

MFL (Magnetic flux leakage) type nondestructive testing has been used for inspection of underground gas pipelines to find metal defects by detecting magnetic leakage signal. Because the underground gas pipeline is exposed by environment such as high pressure with great humidity, external defects are easily formed on the surface of pipelines and they are being grouped respectively. These adjacent defects cause the signal distortion of leakage flux so that it is hard to estimate the shape information of defects. In this paper, we performed to study of the signal distortion and compensating method for multiple defects in MFL type nondestructive testing system by using 3D FEM simulation. This paper proposes the basic algorithm of defect signal analysis on multiple defects on the surface of 30 inch diameter pipeline.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.1
• /
• pp.29-36
• /
• 2004

This study describes the development of coordinate transformation tool for transforming the digital map using newly derived transformation parameters which are determined from the data referred to the local geodetic datum and the geocentric datum (ITRF2000) and the distortion modelling derived from collocation method. We prepared 190 common points and used 107 points to calculate 7 transformation parameters. In order to evaluate an accuracy of coordinate transformation, 83 common points were tested. In this study, we used Molodensky-Badekas model to derive the 7 transformation Parameters. An accuracy of 0.22m was obtained applying 7 Parameters transformation and the distortion modelling together. It shows that the accuracy of coordinate transformation is improved 72% against the result of 7 parameters transformation only. We developed the transformation tool, GDKtrans, which can be transformed the digital map of scales 1/50,000, 1/25,000 and 1/5,000. We also analyzed the digital map of l/5,000 at six urban areas by GPS observations. The result shows less RMSE of about 1.9 m and large disagreement at position and features. Consequently, we suggests that l/5,000 digital map is necessary of whole revision.

• Journal of Korea Water Resources Association
• /
• v.44 no.2
• /
• pp.85-96
• /
• 2011

Probability plotting position is generally used for the graphical analysis of the annual maximum quantile and the estimation of exceedance probability to display the fitness between sample and an appropriate probability distribution. In addition, it is used to apply a specific goodness of fit test. Plotting position formula to define the probability plotting position has been studied in many researches. Especially, the GEV distribution which is an important probability distribution to analyze the frequency of hydrologic data was popular. In this study, the theoretical reduced variates are derived using the mean value of order statistics to derived an appropriate plotting position formula for the GEV distribution. In addition, various forms of plotting position formula considering various sample sizes and coefficients of skewness related with shape parameters are applied. The parameters of plotting position formulas are estimated using the genetic algorithm. The accuracy of derived plotting position formula is estimated by the errors between the theoretical reduced variates and those by various plotting position formulas including the derived ones in this study. As a result, the errors by derived plotting position formula is the smallest at the range of shape parameter with -0.25~0.10.