• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.639-646
• /
• 2016

In order to establish an operational standard based on ship size, this study considered a specific safety management plan for Ulsan along with international standards, analyzed the results of mooring safety assessment at four vulnerable piers and suggests cargo stoppage and emergency unberthing standards as follows. In accordance with ship characteristics, ships of less than 10,000 tons are recommended to limit their activities for wind speeds of 18-21 m/s and wave heights of 1.0-1.5 m. Ships from 10,000-50,000 tons are recommended to observe wind speeds of 17-20 m/s and wave heights of 1.2-1.5 m, while, ships of 50,000-100,000 tons are recommended wind speeds of 15-19 m/s and wave heights of 1.5 m. Ships of more than 100,000 tons are recommended wind speeds of 14-18 m/s and wave heights of 1.5 m.

• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.439-446
• /
• 2006

In ship structures many of the structural plates have cutouts, for example, at inner bottom structure, girder, upper deck hatch, floor and dia-frame etc. In the case where a plate has a cutout it experiences reduced buckling and ultimate strength and at the same time the in-plane stress under compressive load produced by hull girder bending will be redistributed In general, actual ship structure adopted reinforcement of stiffener around the cutout in order to preventing from buckling so it need to examine a buckling and ultimate strength behaviour considering a cutout because In many ship yards used class rule for calculating buckling strength but it is difficult to evaluate perforate stiffened plate with random size. In the present paper, we investigated several kinds of perforated stiffened model from actual ship and then was performed finite element series analysis varying the cutout ratio, web height, thickness and type of cross-section using commercial FEA program(ANSYS) under compressive load.

• Journal of Korea Port Economic Association
• /
• v.24 no.1
• /
• pp.61-83
• /
• 2008

The meaning of "added value" refers to the contribution of the factors of production, i.e., land, labor, and capital goods, to raising the value of a product and corresponds to the incomes received by the owners of these factors. The importance of added value in service industry has been recognized as one of the critical factors to economic growth, even in logistics industry. But, it is hard to find out the previous studies providing a clear definition and framework for designing and analyzing the performance of Value Added Logistics(VAL). The purpose of this study is to define the meaning of extended VAL that extensively includes activities initiating and operating the reverse logistics under the closed-loop logistic scheme, and to suggest the framework that describes the partnerships among participants involving in operating the value added logistics. Also, in this paper, we emphasize on the need for investigation of added value logistics definition and framework based on previous academic studies, and examine various value added logistics service activities of current leading 3PL companies across the world. Finally, we suggest the analytic framework for value added logistics throughout closed-loop logistics.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.435-445
• /
• 2007

Ship structures are thin-walled structures and lots of cutouts, for example, of inner bottom structure, girder, upper deck hatch, floor and dia-frame etc. In the case where a plate has cutout it experiences reduced buckling and ultimate strength and at the same time the in-plane stress under compressive load produced by hull girder bending will be redistributed. In the present paper, we investigated several kinds of perforated stiffened model from actual ship structure and series of elasto-plastic large deflection analyses were performed to investigate into the influence of perforation on the buckling and ultimate strength of the perforated stiffened plate varying the cutout ratio, web height, thickness and type of cross-section by commercial FEA program(ANSYS). Closed-form formulas for predicting the ultimate strength of the perforated stiffened plate are empirically derived by curve fitting based on the Finite Element Analysis results. These formulas are used to evaluate the ultimate strength, which showed good correlation with FEM results. These results will be useful for evaluating the ultimate strength of the perforated stiffened plate in the preliminary design.

• Journal of Navigation and Port Research
• /
• v.38 no.3
• /
• pp.261-268
• /
• 2014

The route of Korea and China situates stable shipping market by the agreement on maritime transport between two countries. Epecially, the Car-ferry shipping market between Korea and China is growing up the world's largest markets in this situation. But, the rapid growth of markets have the possibility of imbalance between supply and demand. In addition that heavy competition can be arisen. The aim of this study is to analyze the ways to reinforce competitiveness of Car-ferry shipping companies(CFSCs) between Korea and China routes through suggesting importance weights of service factors. Firstly, evaluating service factors of CFSCs between Korea and China routes are selected by reviewing literatures and Delphi method. Secondly, importance weights of service factors are calculated using Fuzzy method. As a result, Shipper and CFSCs between Korea and China routes select 'agility of loading and unloading', 'agility of customs', and 'punctuality of transportation' as the most important factors. On the other hand, the two groups are shown the perception gaps on the factors such as 'reasonable shipping cost', 'voyage speed', 'multimodal transportation', and 'professionality of manpower'. The implication of this study is that Government of Korea and China Have to cooperate agreement for mutual drive towed trailer and customs to speedy transportation.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.169-178
• /
• 2018

Gyeongin Port has low awareness, insufficient hinterland infrastructures, and lower competitiveness. So, in this study, we conducted Fuzzy-IPA analysis reflecting the recognition of the consignor companies that are using Gyeongin port to suggest present practical improvement measures for the activation of the operation of Gyeongin port hereafter. As a result of the analysis, three factors, that is, cargo loading/unloading/storage costs, port facility fees, and incentive and support were derived as priority investment areas. Three factors, that is, cargo safety, infrastructure equipment, and inland transportation costs were derived as the areas for maintenance strengthening and factors related to cargo handling and service factors were derived as areas for maintenance of the status quo and areas for gradual improvement, respectively. This study is significant in that it analyzed the recognition of the consignor companies that are using Gyeongin port using a quantifying method and suggested realizable measures for activation based on the results of the analysis. In future studies, the frequency of ships' calling at the port and measures to diversify the sea routes should be additionally reflected on the analysis.

• Journal of Korea Port Economic Association
• /
• v.27 no.4
• /
• pp.51-71
• /
• 2011

The purpose of this study is to use DEA modeling to make an analysis on 12 ODCYs in the hinterland of Busan North Port, so that it may propose possible ways to efficiently operate them. For analysis, this study adopted 3 input factors such as CY area, number of employees and number of cargo work equipments and also adopted 1 output factor, i.e. container throughput. According to the analysis DEA-CCR model, it was found that Chunil(YongDang CY) was the most efficient one among companies engaged in the operation of ODCY. And it was found that KCTC(YongDang CY), Kukbo(U-Am CY), KORAIL(BusanJin CY) and Hanjin (JaeSong CY) would need to boost the container throughput 5 or more times higher than current throughput with a view to improving cargo handling efficiency, while Sebang(U-Am CY), KCTC(U-Am CY), KCTC(YongDang CY), Hyopsung(YongDang CY) and Kukbo(U-Am CY) need to work on personnel restructuring targeted to current employees. Based on the analysis DEA-BCC model, it was found that Chunil(YongDang CY), Dongbu(ShinYoung GamMan CY), Intergis(GamMan CY) and Sebang(U-Am CY) were efficient companies, but KCTC(YongDang CY), Kukbo(U-Am CY), KORAIL(BusanJin CY) and Hanjin(JaeSong CY) were inefficient companies. Particularly, it was found that both KCTC(U-Am CY) and Kukbo(U-Am CY) would need to try harder to carry out personnel reshuffle than other comparable companies.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.223-230
• /
• 2003

KCTA(Korea Container Terminal Authority) is going to introduce automated operating system in the port of Gwangyang container terminal to enhance the efficiency. Prior to developing the container terminal, defining the objective of container terminal operation is essential. This research used AHP technique to define the operation objective of automated container terminal objectively, and the questionnaire to collect the opinions of future customer, operator and research institution. The objectives mix of the automated container terminal are composed of the minimization of initial investments, the minimization of operational expenses, the performance of automation system, the raising of operation efficiency and productivity and the improvement of customer service. The result of the analysis revealed that most important factor among objectives mix was “the minimization of operation expense”. Especially, the user group preferred to select the factor of “the improvement of customer service”as objective rather than select other objectives. The result of this research will suggest some guidelines for deciding the level of investment of terminal construction. information system, automation equipment, terminal worker and etc., which are to be considered in terminal development and the system development hereafter.

• Journal of Korean Port Research
• /
• v.3 no.1
• /
• pp.3-33
• /
• 1989

The amount of the Korean export & import in 1987 reached $88.3 billion which was 1.75% of the total world trade and the proportion of foreign dependence to G.N.P was 74.5%. From these facts, we can infer that the development of national economy is largely dependent upon trade. Therefore the role of transportation, especially Ocean transportation, as a basis of economic development through trade is one of the main factors that can not be passed over. Here, We can define that a port as a subsystem of transportation determines the efficiency of the total transportation system. Thus, the purpose of this paper is to contribute in improvement of the efficiency in port, reinforcement of the international competitiveness for exporting goods by the analysis of the cargo handling charges. In order to do this, this paper deals the case of B.C.T.O.C. Furthermore, this study gives some important informations related to the level of tariffs for establishing an autonomous port administration. The Summary of the conclusions of this paper is as follows ; 1) The object of port administration in Korea has been emphasized on the maximization of efficiency in using the port facilities. Nowadays, however, it should be moved to a direction that port is operated under the compound aims considering the public interests and economy. 2) For a criterian of tariff calculation, A tariff system based on the cost accounting is desirable. In general it is recommended that the cost for construction, management, and operation of port is compensated by the revenue from port operation. Therefore, it is necessary for the administration bodies of each port to establish a tariff system on the basis of the independent profit system. 3) For the investigation of actors of tariff adjustment by the Break-even point analysis, (1) When we conducted the B.E.P analysis using total cost as cost term, we got 3.8% discount in tariff at 12% of target profit rate and 1.5% discount at 15% of rate. when we set the target profit rate as 17% we could have the proper tariff level. (2) When using operating cost as cost term, we got 13.1% discount in tariff at 12% of target profit rate and 10.9% discount at 15% of rate. When setting the target profit rat as 28%, we could have the proper tariff level. 4) Comparing with the tariffs of foreign ports for the basic terminal rate, The tariff level of B.C.T.O.C showed 33% of stevedoring charge and 80% of marshalling charge incurred at Kobe port. The comparison with Singapore port gave 50% of transhipment charge and 17% - 20 % of stevedoring charge. 5) We found that the financial structure of B.C.T.O.C was better than those of other companies and the worth fixed assets ratio was too low. The fact of low worth fixed assets ratio implies that the cargo handling facilities should be increased. Moreover, The return of assets for B.T.T.O.C was good but non-operating expenses were still contained too much in. Therefore, we think that it is necessary for B.C.T.O.C. to rationalize business management. Although the present cargo handing charge for B.C.T.O.C is a proper level in terms of a public corporation, for the final recommendation in connection to the results, It is required to take the rationalization process for business management.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.112-120
• /
• 2019

Benzene is a class 4 hazardous material according to the Act on the Safety Control of Hazardous Substances. This study qualitatively evaluated the damage size of a "toxic" accident and "pool fire" accidents based on benzene in a virtual scenario of a fire and leakage accident during unloading at a port facility. The KORA program was used as an evaluation method, which is supported as a universal program by the National Institute of Chemical Safety. The range of damage effects of a benzene-induced fire and leakage accident was predicted. In the case of toxic damage range, the accident's damage effect range for the "worst case scenario" was reduced by up to 5.11% with a decrease in the size of the leakage hole. In the case of the leakage time, the damage effect range increased to 145.12% with a 10 min leakage time compared to that of a 5 min leakage time and went up to 20 min (212.29%) with a 20 min leakage time. In the case of pool-fire-induced damage, the damage effect range by radiant heat in the "worst case scenario" was 228.8 m in radius from the center of the handling facility. In the "alternative scenario," the damage effect range by radiant heat was reduced by up to 8.26% compared to that in the "worst case scenario" since the size of the leakage hole was decreased by reducing the cross-sectional area of the pipe.