• Proceedings of the Korean Society of Computer Information Conference
• /
• 2008.06a
• /
• pp.25-31
• /
• 2008

본논문에서는이동형통신시스템의프로세서에대한최소전력소모를위한주파수선택알고리즘을제안하였다. 제안한 방법은 클럭 게이팅 방법을 이용하여 저전력 프로세서를 설계한다. 클럭 게이팅 방법은 내장된 클럭 블록을 이용하여 주 클럭을 제어함으로서 전력 낭비를 개선시킨다. 설계 방법은 프로세서에 대해 동적 전력을 고려하여 소모 전력을 비교하고, 설계된 프로세서에 대해 에너지 이득과 소모를 고려하여 주파수를 결정한다. 또한, 슬랙시간을 이용하여 프로세서의 속도를 낮추어 소모 전력을 감소시킨다. 이러한 기술은 클럭 게이팅 방법과 에너지, 슬랙 시간을 이용하여 이동형 시스템의사용 시간이 개선하였다. 실험결과 제안한 알고리즘은 알고리즘을 적용하지 않은 이동형 시스템의 프로세서에 비해 평균 전력이 4% 감소되었다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.10
• /
• pp.56-63
• /
• 2015

Not only performance analysis but also power analysis at early design stages is important in designing a system-on-chip. We propose a power modeling based on clock gating enable signals that enables accurate power analysis at a high-level. Power state is defined as combinations of the values of the clock gating enable signals and we can extract the clock gating enable signals to generate the power model automatically. Experimental results show that the average power accuracy is about 96% and the speed gain of power analysis at the high-level power is about 280 times compared to that at the gate-level.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.9
• /
• pp.28-35
• /
• 2015

In this paper, we propose to identify redundant power states of high-level power model based on clock gating enable signals(CGENs) using dependencies of Boolean functions and structural dependencies of clock gating cells. Three functional dependencies between two CGENs, namely equvalence, inversion, and inclusion, are used. Functions of CGENs in a circuit are represented by binary decision diagrams (BDDs) and the functional relations are used to reduce the number of power states. The structural dependency appears when a clock gating cell drives another clock gating cells in a circuit. Automatic dependency checking algorithm has been proposed. The experimental results show the average number of power state is reduced by 59%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.289-292
• /
• 2008

This paper presents a branch prediction algorithm and a 4-way set-associative cache for performance improvement of OpenRISC processor and a clock gating algorithm using ODC (Observability Don't Care) operation for a low-power processor. The branch prediction algorithm has a structure using BTB(Branch Target Buffer) and 4-way set associative cache has lower miss rate than direct-mapped cache. The clock gating algorithm reduces dynamic power consumption. As a result of estimation of performance and dynamic power, the performance of the OpenRISC processor using the proposed algorithm is improved about 8.9% and dynamic power of the processor using samsung $0.18{\mu}m$ technology library is reduced by 13.9%.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.2 no.3
• /
• pp.163-167
• /
• 2007

In this paper, to design 8 bit RISC Microprocessor, a method of Clock Gating to reduce electric power consumption is proposed. In order to examine the priority, the comparison results of between a 8 bit Microprocessor which is not considered Low Power consumption and which is considered Low Power consumption using a methods of Clock Gating are represented. Within the a few periods, the results of comparing with a Microprocessor not considered the utilization of Clock Gating shows that the reduction of dynamic dissipation is minimized up to 21.56%.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.82-92
• /
• 2008

Recently, many digital signal processing(DSP) applications such as H.264, CDMA and MP3 are predominant tasks for modern high-performance portable devices. These applications are generally computation-intensive, and therefore, require quite complicated accelerator units to improve performance. Designing such specialized, yet fixed DSP accelerators takes lots of effort. Therefore, DSPs with multiple accelerators often have a very poor time-to-market and an unacceptable area overhead. To avoid such long time-to-market and high-area overhead, dynamically reconfigurable DSP architectures have attracted a lot of attention lately. Dynamically reconfigurable DSPs typically employ a multi-functional DSP accelerator which executes similar, yet different multiple kinds of computations for DSP applications. With this type of dynamically reconfigurable DSP accelerators, the time to market reduces significantly. However, integrating multiple functionalities into a single IP often results in excessive control and area overhead. Therefore, delay and power consumption often turn out to be quite excessive. In this thesis, to reduce power consumption of dynamically reconfigurable IPs, we propose a novel fine-grained clock gating scheme, and to reduce size of dynamically reconfigurable IPs, we propose a compact multiplier-less multiplication unit where shifters and adders carry out constant multiplications.

• The Journal of the Korea Contents Association
• /
• v.10 no.12
• /
• pp.10-17
• /
• 2010

In this paper, we design digital D-PHY link chip controling DSI (Display Serial Interface) that meets MIPI (Mobile Industry Processor Interface) standard. The D-PHY supports a high-speed (HS) mode for fast data traffic and a low-power (LP) mode for control transactions. For low power consumption, the unit blocks in digital D-PHY are optionally switched using the clock gating technique. The proposed low power digital D-PHY is simulated and compared with conven tional one about power consumption on each transaction mode. As a result, power consumptions of TX, RX, and total in HS mode decrease 74%, 31%, and 50%, respectively. In LP mode, power reduction rates of TX, RX, and total are 79%, 40%, and 51.5%, separately. We implemented the low power MIPI D-PHY digital chip using $0.13-{\mu}m$ CMOS process under 1.2V supply.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.597-598
• /
• 2008

In this paper, a sample design of I/O port of micro-processor using ODC(Output Don't Care) computation that is one of methods for Clock Gating applicable at the register transfer level(RTL). The ODC computation Method is applied at the point that estimate the value considering Don't Care Conditions from output of datapath to registers using clock in logic system. This paper also shows the results of reduce consumption power due to controlling clock that was supplied at registers. In Experimental results, ODC computation Method reduce power reductions of around 37.5%

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.20-27
• /
• 2010

This paper describes a design of 5-stage pipelined de-blocking filter with power reduction scheme and proposes a efficient memory architecture and filter order for high performance H.264/AVC Decoder. Generally the de-blocking filter removes block boundary artifacts and enhances image quality. Nevertheless filter has a few disadvantage that it requires a number of memory access and iterated operations because of filter operation for 4 time to one edge. So this paper proposes a optimized filter ordering and efficient hardware architecture for the reduction of memory access and total filter cycles. In proposed filter parallel processing is available because of structured 5-stage pipeline consisted of memory read, threshold decider, pre-calculation, filter operation and write back. Also it can reduce power consumption because it uses a clock gating scheme which disable unnecessary clock switching. Besides total number of filtering cycle is decreased by new filter order. The proposed filter is designed with Verilog-HDL and functionally verified with the whole H.264/AVC decoder using the Modelsim 6.2g simulator. Input vectors are QCIF images generated by JM9.4 standard encoder software. As a result of experiment, it shows that the filter can make about 20% total filter cycles reduction and it requires small transposition buffer size.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.6
• /
• pp.89-95
• /
• 2008

In this paper, we designed a low power face detection hardware and analysed its power consumption. The face detection hardware was fabricated using Samsung 0.18um CMOS technology and it can detect multiple face locations from a 2-D image. The hardware is composed of 6 functional modules and 11 internal memories. We introduced two operating modes(SLEEP and ACTIVE) to save power and a clock gating technique was used at two different levels: modules and registers. In additional, we divided an internal memory into several pieces to reduce the energy consumed when accessing memories, and fully utilized low power design option provided in Synopsis Design Compiler. As a result, we could obtain 68% power reduction in ACTIVE mode compared to the original design in which none of the above low power techniques were used.