• Korean Journal of Construction Engineering and Management
• /
• v.12 no.3
• /
• pp.42-52
• /
• 2011

As environmental issues are rising recently efforts to reduce environmental stress are emerging in all industry segments. Especially environmental impact of buildings occupy a critical portion, so each country is operating green building rating system for life cycle of buildings. Accordingly green building rating system for every facility is operating in Korea. And acquisition of grade I for building energy efficiency is mandatory for every new public buildings since 2010. To design green building efficiently and systematically eco-friendly elements should be considered and checked from the schematic design phase. But in many cases eco-friendly elements are checked at the end of constructed design phase. So applying eco-friendly elements at the value engineering process, which is performing through schematic and constructed design phase, could make a efficient and systematic green building design. Value engineering process is divided into pre workshop, workshop and post workshop stages. And subject selection in pre workshop stage is the step that finds out the subjects which has the great possibility to be improved to perform efficient value engineering workshop. So this study present the Green VE subject selection model to select the most considerable eco-friendly subjects in projects.

• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.96-110
• /
• 2020

Recently, due to global warming, it is easily exposed to various disasters such as fire, flood, and earthquake. In particular, large-scale disasters have continuously been occurring in crowded areas such as traditional markets, facilities for the elderly and children, and public facilities where various people stay. Purpose: This study aims to detect a fire occurred in crowded facilities early in the event to analyze and provide an optimal evacuation route using big data and advanced technology. Method: The researchers propose a new algorithm through context-aware 3D object model technology and A* algorithm optimization and propose a scenario-based optimal evacuation route selection technique. Result: Using the HPA* E algorithm, the evacuation simulation in the event of a fire was reproduced as a 3D model and the optimal evacuation route and evacuation time were calculated for each scenario. Conclusion: It is expected to reduce fatalities and injuries through the evacuation induction technique that enables evacuation of the building in the shortest path by analyzing in real-time via fire detection sensors that detects the temperature, flame, and smoke.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.6
• /
• pp.531-537
• /
• 2016

The damage and fracture of machine or structure are caused by the crack happened from the defect existed at the inside of material. The properties of crack propagation and growth characteristic must be considered because there are many cases at which these cracks are densely existed. Therefore, this study investigates the fracture property due to the position of crack and hole inside the standard compact tension (C. T.) specimen. When the concentrated load is applied eccentrically at the standard C. T. specimen, the fracture mechanical behavior due to the existence or non-existence and the position of hole near crack is investigated. As the result of analysis study, model 3 (in case of the distance of 2mm on the horizontal direction between the end part and hole as the specimen model existed with one hole near the crack) has the maximum deformation, stress and deformation energy of the most values among three models. As the distance between the crack and hole inside the specimen becomes nearer, the maximum stress becomes higher in cases of three models. Apart from the number of holes, it is seen that the maximum stress becomes higher near the crack when the hole exists near the crack inside the specimen. If the hole inside the machine or the mechanical structure is punctured by using the result of this study, it is thought that the occurred breakage or breakdown can be prevented by reducing the fracture stress happened at the specimen.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.6
• /
• pp.597-608
• /
• 2009

In this paper, large-deformation elasto-plastic analysis of space frames that considersjoint connection properties is presented. This method is based on the large-deformation formula with finite rotation, which was developed initially for elastic systems, and is extended herein to include the elasto-plastic effect and the member joint connection properties of semi-rigid what?. The analytical method was derived from the Eulerian concept, which takes into consideration the effects of large joint translations and rotations. The localmember force-deformation relationships were obtained from the beam-column approach, and the change caused by the axial strain in the member chord lengths and flexural bowing were taken into account. The effect of the axial force of the member on bending and torsional stiffness, and on the plastic moment capacity, is included in the analysis. The material is assumed to be ideally elasto-plastic, and yielding is considered concentrated at the member ends in the form of plastic hinges. The semi-rigid properties of the member joint connection are considered based on the power or linear model. The arc length method is usedto trace the post-buckling range of the elastic and elasto-plastic problems with the semi-rigid connection. A sample non-linear buckling analysis was carried out with the proposed space frame formulations to demonstrate the potential of the developed method in terms of its accuracy and efficiency.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.2
• /
• pp.119-127
• /
• 2012

Purpose: This study was performed to compare the stress distribution pattern of abutment-fixture connection area using 3-dimensional finite element model analysis when 5 different implant systems which have internal connection. Materials and methods: For the analysis, a finite element model of implant was designed to locate at first molar area. Stress distribution was observed when vertical load of 200 N was applied at several points on the occlusal surfaces of the implants, including center, points 1.5 mm, 3.0 mm away from center and oblique load of 200 N was applied $30^{\circ}$ inclined to the implant axis. The finite element model was analyzed by using of 3G. Author (PlassoTech, California, USA). Results: The DAS tech implant (internal step with no taper) showed more favorable stress distribution than other internally connected implants. AS compare to the situations when the loading was applied within the boundary of implants and an oblique loading was applied, it showed higher equivalent stress and equivalent elastic strain when the loading was applied beyond the boundary of implants. Regardless of loading condition, the abutments showed higher equivalent stress and equivalent elastic strain than the fixtures. Conclusion: When the occlusal contact is afforded, the distribution of stress varies depending on the design of connection area and the location of loading. More favorable stress distribution is expected when the contact load was applied within the diameter of fixtures and the DAS tech implant (internal step with no tapering) has more benefits than the other design of internally connected implants.

• Geophysics and Geophysical Exploration
• /
• v.20 no.2
• /
• pp.88-95
• /
• 2017

Chogye basin, which is surrounded by country rock, has a closed-basin form. In such a basin, incident seismic energy can form multiply reflected waves, thus causing energy concentration to occur at this closed-basin area. Microtremor measurement survey was performed at the Chogye basin, which is located in Chogye-myeon and Jeokjungmyeon, Hapcheon-gun, Gyeongsangnam-do, Republic of Korea. Microtremor data were transformed into the frequency domain, and then the horizontal-to-vertical spectral ratios (HVSR) were calculated. Fundamental resonance frequencies were estimated from the HVSR results for every observation point. Using the empirical relationship between site period and thickness for sediment sites in Korea known from the previous study, the distribution of sediment thickness of the Chogye basin was estimated from the fundamental resonance frequencies. Being compared with the mountainous rim with steep slope, the measurement points inside the basin have low values of the fundamental resonance frequency with the minimum of 1.03 Hz, which corresponds to the thickness of sedimentary layer with the maximum depth of about 100 m. A three-dimensional basin model was constructed for bedrock topography of the Chogye basin by an interpolation of basin depths estimated at each measurement site.

• Journal of Service Research and Studies
• /
• v.1 no.1
• /
• pp.29-48
• /
• 2011

Recently not only industry but also academy have shown an intense interest in social networking service. However, reckless imitation will not guarantee the successful eco-system of social networking service without rich understanding of growth driver and business model. Hence, this study aims at analyzing open platform strategy and business model conducted by a representative social networking service provider in order to provide platform operator, network operator, and portal provider with meaningful implications. Advertisers may pay great attention to social networking service because it has strong ability to provide users with spontaneous motivation to manage and update their profile, and these valuable information can be utilized for providing personalized advertisement on social networking service. As a result, one side of consumers in two side market, advertisers, tend to pay more expenditure to place advertisements. In addition, the open platform adopted by social networking service providers causes pro-sumers to participate in the eco-system, and thereby the explosive quantitative growth is realized. The fact of that this open social networking service can invade other web service area via an unified platform indicates that it may expand its service scope into a wide variety of web service areas. Hence, domestic portal services providers and network providers should consider social networking service not as one of new web services but as an disruptive service platform. Corresponding to the emergence of social networking service, especially if their business area is related to display advertising market, they should seek a way to provide social networking service access users's newly updated information and develop innovative media technologies to enter context awareness ads market.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 1994.05a
• /
• pp.51-53
• /
• 1994

담수는 인간의 생존에 필수적인 요소이다. 우리는 매일 일정량의 물을 섭취하고 있으며, 일상에서 직접, 간접적으로 물과 관련되지 않고서는 생활할 수 없다. 지구 표면의 약 70%가 물로서 덮여 있다고는 하지만 인간의 생활에 직접적인 이용가치가 있는 담수(지표수)는 전체 물의 용적의 2%에 지나지 않는다. 한국의 연평균 강수량은 1,274mm로서 세계 연평균 강수량인 970mm보다 많은 편이나 인구 1인당 연간 강수량은 약 3,000m3으로서 세계 평균인 34,000m3의 11분의 1에 지나지 않는다. 수자원총량중 지하침투와 증발에 의해 손실되는 양을 제외한 하천유출량은 전체의 55%인 697억m3으로서 이것이 곧 가용수자원량이다. 그러나 하절기 강우집중도가 높은 우리나라 실정에서는 가용수자뭔량중 수자원총량의 37%가 홍수시 유출되고 실제 이용량은 수자원총량의 18%인 230억m3에 불과하여 인구증가와 함께 수자원의 가치가 더욱 증대하고 있는 실정이다. 더우기 지하수 이용량은 19억m3에 불과함에 따라 우리나라는 실제 이응수자 원량의 90% 이상을 지표수에 의존하고 있으며, 그 중 약 40%가 호소수로 구성되어 있다. 이러한 수자원 이용효율의 취약성으로 인해 제한된 수자원 용량과 생활 및 농공용수의 과수요에 따른 불균형으로 근래 많은 하천이 갈수기나 평수기시 친천화되어 가고 있어 수중생태계에 큰 위협을 주고 있다. 또한 이에 더하여 산업발달과 함께 수질오염원은 양적으로는 물론 질적으로도 증가일로에 있어 기존의 유기 및 중금속 오염물질을 포함해 수많은 신생 유기화합물질이 수계에 유출되고 있으며, 이에 더해 질소 및 인으로 대표되는 영양물질의 유입과다로 국내 대다수의 호수가 부영양화의 새로운 위협에 직 면해 있다. 우리나라에는 적은 유입유량에 큰 저수용량 및 긴 체류시간으로 대표되는 대규모 자연호는 없으며, 대부분이 매단위 강을 막아 형성된 체류시간 1년 이하의 인공호로서 그 중 안동호, 충주호, 대청호 등은 비교적 체류시간이 긴 호소형 인공호로, 팔당호나 기타 대부분의 호수는 체류시간이 짧은 하천형 인공호로 대별된다(Table 1). 이처럼 국내 호소는 국외의 자연 호와는 다른 구조적 특성을 가짐에 따라 부영양화 특성 역시 매우 상이하고, 호소형 인공호와 하천형 인공호간의 차이 역시 현저하여 일률적인 관리대책을 설정하기가 어려운 실정에 있다. 또한 각 호수의 유역특성이 상이함에 따라 호수별로 유역 오염원의 오염부하율이 현저히 달라(Table 2) 호수에 따른 특성적인 유역관리(Lake-specific management)가 요구되고 있다 정상상태(Steady state)가 아닌 국내 호소에 대해 국외 자연호의 인단순모델 (Simple phosphorus budget model)을 그대로 적용하는 것에 다소 무리한 점이 따르나, 평균적인 개념으로 OECD의 유역부하량 및 호소특성에 따른 부영양화 판정모델을 적용한다면, 국내 주요 호수는 모두 부영양 수준에 있다. 또 각 호수별로 부영양화 제어를 위해 요구되는 인의 삭감부하량은 상당량이 되어 현실적으로 관리가 이미 어려운 실정에 와 있다. 호수의 부영양화는 조류 발생으로 이어지며, 그에 따른 폐해는 각종 형태로 나타나는데 대표적으로 이취미 발생이나 유해조류에 의한 독성물질의 배출, 정수처리 과정의 THM 발생등이 주로 문제가 되고 있다. 따라서 국내 호수의 구조적 특성별 부영양화 실태를 파악하고 그에 따른 영향 및 관리방안에 관한 종합적 고찰이 차후 수질관리를 위해 요구되고 있으며, 특히 납조류로 대표되는 유해조류의 독성영향에 관한 연구는 시급한 실정에 있다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.5
• /
• pp.119-137
• /
• 2020

Over the last two decades, the attitudes to cars have changed from buying a car to sharing a car, especially among young people. Shared transport services and autonomous vehicles together can resolve the accessibility issue of shared transport services. Furthermore, they will make it possible to develop a new model of apartments without car parking. Therefore, the study estimated the demand for car sharing by young people and the running efficiency of car-sharing dealing with their car-based trip demand. The study chose nine apartment complexes for study sites where a majority of the residents were young people. The questionnaire survey was conducted to collect data on the trip demands of young people. The results showed that there are significant differences in the car-sharing use patterns and demand between the apartment houses located in the Capital region and non-capital region. Young people living in apartments in the Capital region used car sharing once per day per person for approximately 80 minutes per trip and tended to hire that between 8 AM and 10 AM. On the other hand, the young people living in apartments in the non-capital region used car sharing twice per day per person for approximately 200 minutes per trip. They tended to hire that frequently in the afternoon and evening as well as in the morning. The results also showed that a single car-sharing vehicle could deal with 3~4 trips per day in the Capital region and around 2 trips per day in the non-capital region.

• International Commerce and Information Review
• /
• v.15 no.4
• /
• pp.341-366
• /
• 2013

The term, Mittelstand, has no exact english translation for the definition, but, today, Mittelstand refers to small and medium-sized enterprises(SME), mostly family-owned firms in Germany. The Mittelstand is called the backbone of the German economy because it drove the economic miracle after World War II. During the global recession and the euro zone's debt crisis in recent years, in which european businesses have faced the near-collapse of competitiveness particularly in manufacturing, the German exports are booming and exceeded exports of China in 2012. Most importantly, the Germany economic performance has been widely attributed to the strength of the Mittelstand. Many of countries, even some leading public companies are seeking to emulate the success of the Mittelstand. Investors evaluate that many of Germany's investable "hidden champions" are Mittelstand companies. The purpose of this study is to present some of answers to the following questions: Firstly, what makes the German Mittelstand so successful? Secondly, what does the success of the German Mittelstand mean for the Korean SMEs in global competitiveness? Thirdly, what Korean government has to do improve the global competitiveness of the Korean SMEs? Some discussions in this study mention the managerial implications for Korean exporting SMEs particularly in manufacturing. Several factors that account for the success of the German Mittelstand are technological excellence and the tradition of family-owned management, concentration on niche market and globalization, and institutional supports. There are some of important lessons to be learned from the German Mittelstand. If the purposes of Korean SMEs want to remain in the sustainable competitive advantage and withstand unforeseen economic turbulences in the future, they must be able to meet the followings: 1) Technology that meets the global standard or exceeding it 2) Competitiveness in price in the global market 3) Active involvement in the globalization process, utilizing various entry modes Innovative products at globally competitive price are a crucial point for Korean exporting SMEs to achieve their competitive edge over others in the target markets abroad. It is time for Korean SMEs to cultivate a core competence in manufacturing in order to position Korea as a global manufacturing hub with SMEs leading.