• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1287-1293
• /
• 2008

Antenna switch module(ASM) for quad-band was developed. This module was integrated by RFIPD(RF integrated passive device) and transistor switch instead of LTCC-type device using low pass filters, diodes and passive elements in RF front end module for cellular phone. This module leads to low cost and miniaturization(The area is $5{\times}5\;mm$ and the thickness is 0.8 mm). The insertion loss and the return loss of each band were averagely measured as 1.0 dB(insertion loss), 15.1 dB(GSM/EGSM return loss) and 19 dB(DCS/PCS return loss), respectively.

• Spatial Information Research
• /
• v.18 no.3
• /
• pp.41-52
• /
• 2010

This paper analyzed the interregional flow changes of software (SW) industries using a GIS Flow Map. Employment data for SW enterprise headquarters from 1999 until 2008 were constructed according to the Origin-Destination Matrix, and were mapped and analyzed using the Flow Mapper and ArcGIS Flow Data Model. From the result we can identify the decentralization of interregional flow in SW industries and recognize the possibilities of the larger SW enterprises' employment, the higher locational footlooseness. The GIS Flow Map was identified as useful tool for researching growth, decline and spatial movement of industrial clusters that experience business relocation. This method can be applied to understand and visualize urban spatial changes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1598-1603
• /
• 2011

This paper describes an enhancement method for a computational pickup model. The conventional computational pickup model utilizes the ray-trace model and the pinhole model. The conventional model is very useful, however, it suffers from quality degradation of reconstructed images at long distances. To overcome the problem, we propose an accurate pickup model. The proposed model includes integration of the rays incoming to a sensor that generates a pixel, resulting in robustness on the Aliasing artifact. To show the effectiveness of the proposed method, experimental results are carried out. The results indicated that the proposed method is superior to the conventional method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.3
• /
• pp.153-163
• /
• 1986

GaAs, one of the III-V compounding semicondnctors, has been widely employed as base materials for the fabrication of the ultra-high-speed devices in the filelds of DBS, optical communications, MMIC'S and digital IC'S. There have been some reports on 4Kx4bit SRAM by D/E MESFET'S, 4K bit SRAM by HEMT'S, and receiver front ends for X-band by MMIC technologies, respectively. This paper reviews GaAs materials, wafer fabrication processes, device applications, and design aspects, and, finally, descusses the future of the ultra-high-spped-devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.2
• /
• pp.250-260
• /
• 1993

Packet Reservation Multiple Access(PRMA) protocol provides a very efficient mechanism for many number of voice and data terminals with bursty traffic characteristics to share efficiently a common transmission channel. This protocol, however, cannot operate in high load conditions. That is, there occurs a instability problem, since the reservation channel is allowed to shrink to zero. In this paper, a more stable PRMA protocol which can avoid such problems and integrates voice and data traffic efficiently is proposed. Also, the performance of the proposed protocol is analyzed by a computer simulation. According to the simulation results, it can be shown that the proposed protocol provides a more efficient mechanism for voice/data integration and ensures a more stable operation than conventional PRMA protocol in high load conditions.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.965-970
• /
• 2018

In this paper, the transition of the folded substrate integrated waveguide (FSIW) using two substrates is suggested and applied to the bandpass filter. The FSIW has similar characteristics with the SIW and can be reduced the width of the SIW. The transition between the FSIW to the microstrip is designed by using shorted quarter wavelength line. Also, the bandpass filter is designed by using the FSIW and the elliptic lowpass filter of 5 section. Fabricated bandpass filter has the center frequency of 5.75 GHz and the bandwidth of 33.2%. Also, the insertion loss and return loss at the center frequency are 0.63dB and 19.1dB, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1164-1170
• /
• 2011

In this paper, we propose accurate lattice extraction of elemental image array and pre-processing methods in computational integral imaging. Pre-processing methods remove distortions and noises of the image. Such distortions occurred in pickup systems are rotational errors. Distortions will degrade the resolution of reconstructed images. To overcome this problem, we propose our methods for extraction of elemental image array and pre-processing methods. Also, we describe that distortions affect the high quality reconstruction. Optical and computational experiments indicate that reconstructed images applied our methods is better than reconstructed images unapplied our methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1171-1176
• /
• 2011

This paper describes an analysis on the relationship between elemental image size and object locations in the computational integral imaging reconstruction and in the pickup using a periodically-distributed lenslet array. A sparse sampling effect arises from a periodically-distributed lenslet array in the pickup of 3D objects. The relationship between elemental image size and object location is also reported. Based on the analysis, a method to eliminate the sparse sampling is proposed. To show the effectiveness of the proposed method, experimental results are carried out. It turns out that the theory works.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2271-2276
• /
• 2008

In this paper, we propose a computational integral imaging reconstruction (CIIR) method based on scale-cariant magnification technique for resolution-enhanced 3D images. First, we introduce an interference problem among elemental images in CIIR. Magnification by a large factor causes inference among elemental images when they are applied to the superposition process. Thus, the resolution of reconstructed images is limited. To overcome the interference problem, we propose a method to calculate a minimum magnification factor while CIIR is still valid. Magnification by a new factor enables the Proposed method to reconstruct resolution-enhanced images. In addition, the computational load of the proposed method is less than that of the previous method. To confirm the feasibility of the proposed method, some experiments are carried out and the results are presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.299-308
• /
• 2008

This paper proposes a new design specification-based band fault modelling technique that can test design specification in a time domain. The band fault model is defined and the conditions of band fault model are gained as normal operation regions are defined. And the conditions of band fault model are used in a 5.25GHz low noise amplifier, then 9 band fault models that can detect hard and parametric faults of active and passive devices are obtained.