• Convergence Security Journal
• /
• v.20 no.2
• /
• pp.137-144
• /
• 2020

Non-commissioned officers reach 80% of the 6,500 recruitment target, and 88% of the workforce is operated, about 9,500 less than the quota. To solve this problem, RNTC was tested and operated for about four years since 2015. And it was run directly by the Army in 2020. However, the Army has not solved the problem of RNTCs in college. While maintaining RNTC in universities, measures were needed to cope with the decrease in school-age populations, but the army did not address them. The universities tried to achieve two goals: securing students and increasing employment rates, which failed to meet the expectation. This was mainly because students only from particular departments were selected. And this was not what the army aimed to achieve through RNTC. After analyzing the cause of this phenomenon. the problem turned out to be the erroneous perception of RNTC to the general public. In order to eradicate this problem, there needs to be more effective promotion by the Army, and some improvements are also needed in terms of RNTC's selection process. In this paper, we find and describe the problems of the system itself. If this problem is solved, we will be able to not only satisfy the needs of both the Army and the universities, but also produce good non-commissioned officers through the RNTC system.

• Journal of Environmental Health Sciences
• /
• v.41 no.3
• /
• pp.171-181
• /
• 2015

Objectives: This study aimed to survey the characteristics of air quality and meteorological conditions in a greenway park. Methods: We measured meteorological and health related factors, including noise, particulate matter ($PM_{10}$) and selected gaseous air pollutants at three locations in a greenway park and on a general roadside as comparison. The measurements were repeated four times from April to October 2014. Results: The average air temperature in the greenway park was $20.7^{\circ}C$ which was $1-2^{\circ}C$ lower than on the general roadside. The average $PM_{10}$ concentration in the greenway park was $85.0{\mu}g/m^3$, a level 2-3 times lower than that at the roadside. The noise level at the greenway site was 4.4 dB(A)- 23.0 dB(A) lower than at the roadside. The average CO, $CO_2$, $SO_2$ and NOx concentrations in the greenway park were lower than at the roadside. The average phytoncide and anions concentrations in the greenway park were higher than at the roadside. Conclusions: The urban forest of the greenway park may have some impact on air quality and meteorological conditions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.585-590
• /
• 2012

Coronary Intervention treatment has become the core that is the test of cardiac catheterization to conduct treatment with Coronary Arteriography. Operators must be careful in Coronary Intervention treatment because the stent is inserted into the point of narrowing of blood vessel. So, the operator must correctly recognize the path of blood vessel to deal with the problems which are damages and ruptures of blood vessel, and there would be some errors of finding the path of blood vessel by bad qualify of the image. Therefore in this paper, median filtering is conducted by preprocessing to evaluate the performance of the effect of noise of the image that affects quality of the image and Fuzzy Edge Extraction Techniques is tested by using Soble Edge Extraction Techniques to compare the performance with The Fuzzy Edge Extraction Techniques. In result, the performance, removing the noise and extracting the signal of Fuzzy Edge Extraction Techniques using median filtering, demonstrates the superiority.

• Journal of Korean Society of Rural Planning
• /
• v.24 no.2
• /
• pp.109-114
• /
• 2018

In this study, we estimate the greenhouse farmers' willingness to pay of agricultural water supply through pipeline. First, in the questionnaire design, orthogonal design and block design were used to enhance the ease of survey. Second, the theoretical model was constructed through the setting of the probability utility function, and the parameters were estimated by using the conditional logit model. Third, all of the estimation coefficients were statistically significant at the 1% significance level. The results of analysis are summarized as follows. First, the probability of selection is increased when maintenance is carried out by Korea Rural Community Corporation or local government. Second, the probability of selection is increased when agricultural water supply through pipeline is higher than the current level. Third, if the Korea Rural Community Corporation carries out maintenance management, the marginal willingness to pay is 44 won per ton. And if the local government carries out maintenance management, the marginal willingness to pay is 25 won per ton. Fourth, according to the quality level of agricultural water supply, the marginal willingness to pay is 101 won, 114 won and 120 won per ton, respectively. This study can be used as a basic data on the cost setting for agricultural water supply through pipeline.

• Journal of Chest Surgery
• /
• v.34 no.8
• /
• pp.626-629
• /
• 2001

Congenital polyvalvular disease is a connective tissue disorder affecting more than one heart valve with variable involvement of the entire valvular and subvalvular apparatus. It is frequently associated with the Trisomy 18 and trisomy 13-15 or ventricular septal defect and patent ductus arteriosus. We present an isolated case of congenital polyvalvular disease in a new born baby with a review of the pertinent literatures, which has not been described in Korea. The mass was discovered as a right atrial mass in the prenatal ultrasonography and it was thought to be either a hematoma or a myxoma in the preoperative echocardiography. Microscopic examination of the surgically resected mass showed irregular thickening, nodulation, and additional features of calcification and ossification in the valvular connective tissue on the body of anterior and septal leaflet of tricuspid valve. Congenital polyvalvular disease should be included in the differential diagnosis in cases showing valvular calcification or ossification in the fetal echocardiography.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2001.08a
• /
• pp.36-37
• /
• 2001

큰가리비는 자웅이체이다. 난환형성과정은 난모세포의 발달정도에 다라 다르게 나타나고 있다. 난자형성과정은 난원세포기, 전난황형성난모세포기, 초기난황형성난모세포기, 후기난황형성난모세포기, 성숙난모세포기의 연속적인 5단계의 과정으로 나눌 수 있었다. 전난황형성기 난모세포질 내에서는 핵주변 구역에 골지장치와 수많은 공포들 및 미토콘드리아들이 출현하고 있는데 이들은 차후, 지방적 형성에 관여한다. 난황형성전기난모세포(previtellogenic oocyte)에서는 지방적 및 지질과립들이 핵막 근처에서 출현하여 피질층쪽으로 분산되는 반면, 같은 발달 단계의 난모세포질의 피질구역에서는 피질과립들(단백질성 난황과립)이 처음으로 생성되어 난황막 근처의 피질층에서 핵주변 구역쪽으로 분산.분포된다. 난황형성후기 난모세포에서는 세포질 내의 골지장치, 공포, 미토콘드리아, 그리고 조면소포체들이 자율합성에 의해 난황과립 형성에 관여하고 있다. 반면 외인성 물질들인 지질형태의 과립들, 다량의 글리코겐 입자들이 생식상피 내에서 출현하고 있는데. 이들 물질이 생식상피에서 난황막 구조물인 미세융모를 통해 난황형성 후기 난모세포의 날질 내로 통과해 들어가는 현상이 관찰되었다. 이와같은 현상은 난황형성이 일어날 때에 heterosynthesis가 일어나고 있음을 시사한다. 완숙난모세포의 난경은 약 50~60$\mu\textrm{m}$이다. 정자형성과정은 정원세포기, 제1차정모세포기, 제2차정모세포기, 정세포기, 정자기의 연속적인 5단계로 나눌수 있었다. 정셍포기에서 정자로 변태되는 과정 중에 침체의 분화과정이 있는데 이에는 1. Golgi phase, 2. Cap phase 3. acrosome phase, 4. maturation phase의 단계를 거쳐 첨체가 완성된다. 정자는 원시적 형태를 이루고 있으며 4개의 미토콘드리아가 부핵을 형성하고 있다. 완숙정자 두부의 길이는 대략 $3 \mu$m 이며, 미부의 길이는 약 $30 \mu$m정도이다. 정자 미부편모의 axoneme은 중앙의 2개의 미세소관(microtubule)과 주변에 위치한 9개의 2중 미세소구관(microtublue)으로 이루어져 있다.

• Journal of the Korean Magnetics Society
• /
• v.8 no.2
• /
• pp.86-92
• /
• 1998

Homegeneous feedstock is necessary to make plastic magents with uniform magnetic properties, therefore the optrimized mixing route and the homogeneity evaluation method are demanded. In this paper, method of homogeneity evaluation and effect of homogeneity on the magnetic prperites were investigated using Sr-ferrite /EVA plastic magnets. The feedstocks with different homogeneity were prepared using batch mixer and single screw extruder. The homogeneities of feedstocks were tested by torgue sensor, capilary rheometer, and measurement of magnetic properties. Mixing torque measurement using torque sensor was an effective method to determine the critical powder loading, but it was nor suitable to suitable to determine the feedstock mixing quality. Particle alignment measurement of a plastic magent was very accurate to evaluate the homogeneity, but expensive equipments were required to make and measure the samples. Pressure measurement using capillary rheometer was a very effective and easy method with high accuracy. Homogeneous feedstock increased the particle alignment of plastic magnet. Remanet flux density and maximum energy product increased linearly and quadratically with increasing particle alignment, respectively.

• Geotechnical Engineering
• /
• v.4 no.4
• /
• pp.39-50
• /
• 1988

Until now, most probabilistic approaches to the slope stability analysis have been accomplished on the arc failure surface without load. In this study, the relationships between the probability of failure and the safety factor are investigated when the shape of failure is logarithmic spiral on the homogeneous slope with ground water level, the probability distributions of the load and the strength parameter of soil being assumed as normal distribution, log-normal distribution and beta distribution. The results obtained are as follows; 1. For the same safety factor, the design of slope is more reasonable by using the probability of failure than by the safety factor because the probability of failure is increased as the coefficient of variation is increased. 2, The safety factor is more reasonably determined by the coefficient of variation of the strength parameter than by the field condition when the safety factor is applied to design of slope.

• Korean Journal of Metals and Materials
• /
• v.48 no.11
• /
• pp.1035-1040
• /
• 2010

The research efforts on GaN-based light-emitting diodes (LEDs) keep increasing due to their significant impact on the illumination industry. Surface mount technology (SMT) is widely used to mount the LED packages for practical application. In surface mount soldering both the device body and leads are intentionally heated by a reflow process. We studied on the effects of multiple reflows on microstructural variation and joint strength of the solder joints between the LED package and the substrate. In this study, Pb-free Sn-3.0Ag-0.5Cu solder and a finished pad with organic solderability preservatives (OSP) were employed. A $Cu_6Sn_5$ intermetallic compound (IMC) layer was formed during the multiple reflows, and the thickness of the IMC layerincreased with an increasing number of reflows. The shear force decreased after three reflows. From the observation of the fracture surface after a shear test, partially brittle fractures were observed after five reflows.

• Korean Journal of Metals and Materials
• /
• v.50 no.1
• /
• pp.71-77
• /
• 2012

We studied the effect of heat treatment on the microstructures and mechanical strength of the solder joints in the Light Emitting Diode (LED) packages. The commercial LED packages were mounted on the a flame resistance-4 (FR4) Printed Circuit Board (PCB) in the reflow process, and then the joints were aged at $125^{\circ}C$ for 100, 200, 300, 500 and 1000 hours, respectively. After the heat treatment, we measured the shear strength of the solder joints between the PCB and the LED packages to evaluate their mechanical property. We used Pb-free Sn-3.0Ag-0.5Cu solder to bond between the LED packages and the PCBs using two different surface finishes, Electroless Nickel-Immersion Gold (ENIG) and Electroless Nickel-Electroless Palladium-Immersion Gold (ENEPIG). The microstructure of the solder joints was observed by a scanning electron microscope (SEM). (Cu,Ni)6Sn5 intermetallic compounds (IMCs) formed between the solder and the PCB, and the thickness of the IMCs was increased with increasing aging time. The shear strength for the ENIG finished LED package increased until aging for 300 h and then decreased with increasing aging time. On the other hand, in the case of an ENEPIG finished LED package, the shear strength decreased after aging for 500 h.