• Journal of Korea Multimedia Society
• /
• v.8 no.5
• /
• pp.660-669
• /
• 2005

In this paper 10Mbps master-slave based PLC modems are tested for measuring and analyzing both network and application level performances in the general buildings. The devices under test consist of one master PLC modem and three slave modems. The selected parameters for inspecting the performances are throughput, latency and frame loss rate from the RFC 2544, and one-to-many and many-to-one throughput from the RFC 2285. The results of the performance test show that the PLC modems have Performed better in data transmission when the frame size is increased and the transmission speed is decreased. It is expected that these results will be useful to analyze the effect of noise sources when compared to the performance test under the noiseless environments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.86-89
• /
• 2009

In this paper, a broadband power line communication modem and network technology to develop tests with actual characteristics of the underground power line communication channel to be interpreted. Length and structure of the underground distribution line due to underground distribution line to the broadband powerline communication channels to measure the amount of attenuation on the signal generator, spectrum analyzer, such as contactless coupler was used to configure the channel measurement system. Demonstration tests in the test line as a single line by selecting the longest high-voltage lines where the two-channel measurement and signal attenuation on the noise level was measured. Measuring results degrade communication performance can be quite sure that was the presence of impulse noise, long lines, the line length was confirmed by the high-frequency attenuation appears.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.6
• /
• pp.251-254
• /
• 2005

Animpedancecalculationmethodfortheirregularshapedpowerdistributionnetworksispresented.Theirregularshapedmetal-dielectric-metalboardissplitintothreepieceofsegmentstocalculatetheimpedancebetweenthetwoseparatedpointsontheboard.Transmission-matrixdescriptioncorrespondingtotheunitcolumnofboardandtheconnectionofunitcolumnboardareintroduced.Thenthetransmission-matrixfortheeachsegmentiscalculatedandreducedtothe2-portsimpedancematrix.Theproposedalgorithmisveryfastcomparingtheexistingmethods.Appliedtothe6inchby5inchsizeirregularshapedboard,theproposedmethodshows15timesfasterthantheelectromagneticorcircuitanalysismethod.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.584-591
• /
• 2004

The conventional analog-based firing circuit can be implemented by comparing a linearly decreasing periodic sawtooth waveform synchronized to the ac supply, with a control signal corresponding to the desired converter delay angle. This circuit requires a large number of passive components (resistance and capacitor) and careful adjustment of the synchronization circuity. In this paper a novel firing circuit is proposed for thyristor switch. The proposed circuit is implemented by using digital components(FPGA, A/D, and DSP etc.) on the basis of the analog cosine method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.4
• /
• pp.56-64
• /
• 1997

최근 용접분야에서는 용접성능을 향상시키기 위하여 인버터회로를 용접기에 적용한 인버터 용접기에 관한 연구가 활발히 진행되고 있다,. 그러나 범용의 인버터 용접기의 경우 다이오드 정류기를 사용함에 저차의 전류고조파가 발생하고 시스템 역율을 저하시킨다. 따라서 본 논문에서는 인버터 아크 용접기의 역율개선을 위한 PWM 컨버터에 관하여 연구하여 입력전류의 저차 고조파를 저감하였고 전원전압과 동상으로 전원전류를 제어함에 의한 단위 역율형 인버터 용접기의 특성을 해석하였다. 또한 본 논문에서는 에너지 절약, 용접 특성, 역율, 사용율, 크기 및 부피 등의 관점에서 인버터 아크용접기의 응용연구 및 실험적 분석을 수행하였고 용접기 시스템에서 발생하는 전기적 노이즈를 억제하고 전력용 반도체 소자를 보호할 목적으로 새로운 노이즈 차폐변압기를 채택하였다. 이상의 전체시스템은 싱글칩 마이크로 프로세서를 이용한 디지털 제어기로 구현함으로서 제어기의 유연성과 기능의 다양화를 추구하였다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.67-69
• /
• 2020

본 논문은 평면 변압기에서 발생하는 공통모드 노이즈를 제거하기 위해 새로운 회로 구조 및 변압기의 와인딩 레이아웃을 제안한다. 제안하는 컨버터는 1차측의 병렬구조로 인하여 풀-브리지와 같은 구조를 갖고 있고, 높은 파워의 어플리케이션에 적합하게 사용되어질 수 있다. 2개의 하프-브리지 LLC 공진형 컨버터 변압기의 1차측은 한쪽 끝이 정전압 전위를 갖도록 연결되어 있다. 이에 따라 같은 dv/dt 특성을 갖는 1차측과 2차측 와인딩이 존재하게 되고, 이러한 와인딩을 인접하게 배치하는 구조를 통해 변압기에서 발생하는 공통모드 노이즈를 크게 줄일 수 있다. 최종적으로 EMI 필터의 크기를 크게 줄일 수 있고, 높은 전력밀도를 달성할 수 있다.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.55-63
• /
• 1999

It is necessary to eliminate the broad band noise whose frequency is in the range of several kHz to tens MHz generated from the AC power line to supply the power to electrical and electronic equipments. Because this kind of noise could damage or malfunction such equipments. To suppress those noises, some conventional devices such as a filter or surge suppressor have been used. However, they can not be isolated from the common-mode noise widely spreaded in all power line, which results in poor common-mode rejection performance. In this paper, we proposed a design method of shielded isolation transformer and a jumped circuit analysis model for shielded isolation transformer applicable to filtering common-mode noise as well as normal-mode noise. The analysis model has been verified as a suitable one for shielded isolation transformer through comparison of the simulation with experiment. In addition, it has been shown that the reduction performance for conducted noise of prototype 3 kVA shielded isolation transformer is superior to a unshielded isolation transformer.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.4
• /
• pp.146-154
• /
• 1998

Broadband noise with frequency components in the range from several kHz up the tens of MHz is a major obstacle factor in normal operation of the AC line to supply the power to electrical and electronic control equipments. Because this kind of noise could damage the device or could be a source of malfunction, many devices such as filter and surge suppressor are used to cut off the noise. But those devices could not disconnected from the power line, so they result in poor common-mode of NCT as well as insulation characteristics as a isolation transformer in addition faraday shielding and proposed analysis model of NCT having tow functions of surge and noise reduction. The simulated and experimental results for the surge suppression characteristics are compared and evaluated for designed protype 1[kVA] NCT.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.407-409
• /
• 2006

우주발사체I 상단 시스템은 비행 중에 킥 모터 점화, 위성분리와 같은 HBW 점화기 기폭이 순차적으로 발생 한다. HBW 점화기의 기폭시에는 일반적으로 전도성 구조물을 통한 단락전류가 일시적으로 발생한다. 이러한 단락전류는 구동 전원 측으로 최대 전류 값 및 루프 면적에 비례한 일시적인 자기장을 형성시키고 near 필드(${\lambda}/2{\pi}$) 내의 인접하게 위치한 하니스에 자계 결합을 통한 역기전력 발생의 원인이 될 수 있다. 이러한 인접 하니스에 자계 노이즈 결합은 여러 자료를 통해 우주시스템 환경에서 일시적인 데이터 손실의 원인이 되는 것으로 분석되고 있다. 본 논문은 우주발사체의 HBW 점화기 기폭시 발생되는 전도성 구조물 단락전류 귀환현상으로 인한 자계노이즈 분석 및 감쇄방안에 대해 논의하고자 한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.9
• /
• pp.17-24
• /
• 2008

Recently, the importance of supplying the reliable electric power is increasing. therefore, the importance of diagnosis of power equipments is increasing also. Breaking insulation of stator windings is major cause of faults in high voltage generators. On-line PD (Partial Discharge) detection using Capacitive Coupler at stator windings is used widely to diagnose high voltage generator. However, precise PD(Partial Discharge) detection is impossible if detected signals are mixed with PD and noise signal. In this paper, we analyze detected signals using Capacitive Coupler at 13[kV] hydroelectric generator stator winding and suggest not hardware method but noise elimination algorithm for detecting PD of generator stator winding considering relation of periphery signals.