• 한국음향학회지
• /
• 제25권6호
• /
• pp.291-297
• /
• 2006

본 논문에서는 기타 앰프에 사용되는 아날로그 헬리컬 스프링 잔향기를 디지털 필터로 모델링하는 기법에 대하여 소개한다. 기존의 디지털 잔향기들이 실내 음향 기반의 음장모드를 제공하는데에 비하여, 본래의 헬리컬 스프링 잔향기 자체에 대한 분석과 모델링 없이 아직도 실질적으로 기타앰프의 $70{\sim}80%$ 정도가 헬리컬 잔향기를 사용하기에, 실내 음향학적 접근이 아닌 헬리컬 스프링 잔향기 자체를 하나의 이펙터로 간주하고 이를 모델링하는 데에 초점을 두고 연구를 진행하였다. 제안된 알고리즘으로 구현한 디지털 필터로 시뮬레이션을 수행하여 청취평가를 수행한 결과, 기존의 아날로그 헬리컬 스프링 잔향기와 인지적으로 구분할 수 없는 매우 유사한 특성을 나타내는 것을 확인하였다.

• 대한통합의학회지
• /
• 제12권2호
• /
• pp.167-176
• /
• 2024

Purpose: This study aimed to verify the effectiveness of suicide prevention education using the "Life Charger" program for older adults. Methods: This study conducted the "Life Charger"suicide prevention education with 95 older adults in the experimental group. Participants were recruited from a senior welfare center and a senior citizen center in D metropolitan city, and their attitudes toward suicide and sense of competence in providing help before and after the education were investigated. While no measures were taken for the control group, their attitudes toward suicide and help-giving competence were surveyed during the same period. Statistics were analyzed using SPSS 23.0, demographic variables of the experimental and control groups were calculated as percentiles, and Chi-square analysis and paired-sample t-test were performed to verify the homogeneity of the experimental and control groups. Results: To verify the effectiveness of the "Life Charger"suicide prevention education, the effectiveness of attitude toward suicide before and after the education was verified. The experimental group showed a significantly higher level (t=-6.34, p<.000). Their competence in providing help was also at a significantly higher level (t=-10.20, p<.000). Upon verifying the effectiveness of the program, the experimental group's attitude toward suicide was found to be significantly higher; however, the control group showed no change in attitude toward suicide and competence in providing help. Conclusion: This study verified that the "Life Charger"suicide prevention education for older adults was effective in increasing attitudes toward suicide and sense of competence in providing help. To increase the effectiveness of suicide prevention education for older adults, follow-up research should determine whether there are any actual changes after the training, and attitudes toward suicide and help-providing competence should be increase d through universal and repetitive education to prevent suicide among older adults.

• 폴리머
• /
• 제38권2호
• /
• pp.250-256
• /
• 2014

본 연구에서는 이축 스크류식 압출기를 이용하여 폴리프로필렌(PP)에 도전성 필러인 다중벽 탄소나노튜브 (MWNT)와 스테인레스강 단섬유(SSF)를 첨가하여 복합체를 제조하였으며, 이에 대한 표면저항 및 기계적 특성을 조사하였다. 표면저항을 측정한 결과 PP/MWNT에 소량의 SSF를 첨가하였을 때 더 낮은 MWNT 함량에서 percolation threshold가 나타났다. 그리고 제조된 복합체에 대한 인장시험 결과 순수 PP와 비교해서 파괴점 신장률은 감소하였으나 탄성률과 강도는 증가하였다. 또한 동역학분석을 통하여 MWNT와 SSF 복합체의 저장탄성률과 tan ${\delta}$에 미치는 영향을 조사하였으며, SEM을 이용하여 필러들의 모폴로지 및 복합체의 파단면을 관찰하였다.

• 한국산업융합학회 논문집
• /
• 제12권2호
• /
• pp.99-105
• /
• 2009

Among a few items with world wide competitiveness are the semiconductor and the LCD. Grinding/polishing is the most significant process in manufacturing semiconductor wafers and LCD panels, the most critical quality of which is the precision rate of the machined surfaces. It is well known that the control of the vibrations is the major factor in maintaining superb machined surfaces. In this paper the dynamic properties of a grinding machine have been investigated through the frequency analysis test and the computer simulation to deduce ideas of design modifications for improved stability. The alterations have been applied to the simulation model, which is supposed to have identical dynamic property with the original structure, to identify the effects and to finally achieve the satisfactory level of stability. The result shows that the machine can have much improved stability with relatively simple design changes, and also can improve the surface quality of the products.

• 공업화학
• /
• 제19권4호
• /
• pp.370-375
• /
• 2008

비수계 분산(NAD : non-aqueous dispersion) 중합을 이용하여 친환경적인 아크릴 수지를 합성시 최적의 중합조건에 대해 연구하였다. 중합된 고분자 입자들 간의 응집을 방지하기 위한 안정제의 적정량은 20 wt%로 나타났고 안정된 NAD 상태를 유지하기 위한 혼합 용매의 적정 혼합비는 지방족과 방향족 용매의 비율이 80 : 20인 것으로 나타났다. NAD 수지의 점도는 반응시간뿐만 아니라 개시제의 양 및 교반 속도 등에 의해 영향을 받는 것으로 나타났다. 또한 NAD 수지의 입자 크기 및 분포도, 안정제의 양, 개시제의 농도 등에 의해 영향을 받는 것을 확인하였다. 단량체의 투입시기는 단량체를 초기에 모두 투입하면 용매의 극성이 증가하여 입자의 크기가 커져서 입자의 안정성이 저하되므로 단계별로 지속적으로 투입할 필요가 있는 것으로 관찰되었다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.277-280
• /
• 1996

We have developed a ground-isolation circuit in order to reduce the noise of the internal controller system for the total artificial heart(TAH) and ventricular assist device(VAD). Using the ground-isolation technique, we could transmit the analog target signal to other pheriperal device including IBM PC via RS232C and polygraph, with no noise. Experimental results of VAD showed that there was less impulsive noise in current signal which caused in our previous conventional system. Therefore it could be proved that implementation of isolation technique is very effective to improve the signal to noise ratios of analog signal transmission for TAH or VAD.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.273-276
• /
• 1996

In the Total Artificial Heart (TAH) and Ventricular Assist Device (VAD), the size implanting the internal controller into human body is very serious problem. Hence, we need the size reduction of that controller for safe implantation. Using PSD302 chip for microcontroller-based applications, we could decrease the number of components in the digital control board and miniaturize the digital control board. We could replace a ROM, RAM, and a latch with that single chip, so the size of the newly developed board could be half the previous board.

• 한국염색가공학회지
• /
• 제34권1호
• /
• pp.27-37
• /
• 2022

In this study, a study and interpretation of the spinning process in copolymerized aramid spinning was conducted. In order to proceed with the spinning process modeling and analysis, the spinning process was modeled through the physical property modeling of the spinning solution and the structural modeling of the spinneret, and structural stability and flow of the spinneret for this spinning were analyzed. After modeling the spinning solution and the spinneret in a virtual space, the pack pressure and flow rate when the spinning solution was discharged were simulated. Macroscopically, the structural stability of the spinneret was confirmed at the standard pack pressure (100 kg·f/cm²), and microscopically, the flow rate and pressure drop data of the spinning solution according to the L/D(Length (L)/Diameter (D)) value were analyzed. Based on the research and development of virtual engineering modeling and analysis, we present the possibility of changing the shape and mechanical properties of copolymer aramid fibers according to the spinning process.

• 한국결정성장학회지
• /
• 제19권1호
• /
• pp.6-10
• /
• 2009

본 논문에서는 혼합소스(mixed-source) HVPE(hydride vapor phase epitaxy)방법으로 선택성장(SAC: selective area growth) GaN/AlGaN 이종접합구조의 발광다이오드를 r-plane 사파이어 기판 위에 제작하였다. SAG-GaN/AlGaN DH(double heterostructure)는 고온 GaN 버퍼층, Te 도핑된 AlGaN n-클래딩층. Gan 활성층. Mg 도핑된 AlGaN p-클래딩층. Mg 도핑된 GaN p-캡층으로 구성되어있다. GaN/AlGaN 이종접합구조의 발광다이오드의 특성을 알아보기 위해 SEM을 통한 구조적 분석과 전류-전압 측정(I-V: current-voltage measurement), 전류-광출력(EL: electroluminescence) 측정을 통하여 전기적, 광학적 특성을 평가하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.50-50
• /
• 2008

ZnO has been extensively studied for optoelectronic applications such as blue and ultraviolet (UV) light emitters and detectors, because it has a wide band gap (3.37 eV) anda large exciton binding energy of ~60 meV over GaN (~26 meV). However, the fabrication of the light emitting devices using ZnO homojunctions is suffered from the lack of reproducibility of the p-type ZnO with high hall concentration and mobility. Thus, the ZnO-based p-n heterojunction light emitting diode (LED) using p-Si and p-GaN would be expected to exhibit stable device performance compared to the homojunction LED. The n-ZnO/p-GaN heterostructure is a good candidate for ZnO-based heterojunction LEDs because of their similar physical properties and the reproducibleavailability of p-type GaN. Especially, the reduced lattice mismatch (~1.8 %) and similar crystal structure result in the advantage of acquiring high performance LED devices with low defect density. However, the electroluminescence (EL) of the device using n-ZnO/p-GaN heterojunctions shows the blue and greenish emissions, which are attributed to the emission from the p-GaN and deep-level defects. In this work, the n-ZnO:Ga/p-GaN:Mg heterojunction light emitting diodes (LEDs) were fabricated at different growth temperatures and carrier concentrations in the n-type region. The effects of the growth temperature and carrier concentration on the electrical and emission properties were investigated. The I-V and the EL results showed that the device performance of the heterostructure LEDs, such as turn-on voltage and true ultraviolet emission, developed through the insertion of a thin intrinsic layer between n-ZnO:Ga and p-GaN:Mg. This observation was attributed to a lowering of the energy barriers for the supply of electrons and holes into intrinsic ZnO, and recombination in the intrinsic ZnO with the absence of deep level emission.