• Composites Research
• /
• v.26 no.4
• /
• pp.235-244
• /
• 2013

A volume integral equation method (VIEM) is introduced for the solution of elastostatic problems in an unbounded isotropic elastic solid containing multiple isotropic elliptical fibers of arbitrary orientation subject to uniform stress at infinity. The fibers are assumed to be long parallel elliptical cylinders composed of isotropic elastic material perfectly bonded to the isotropic matrix. The solid is assumed to be under plane strain on the plane normal to the cylinders. A detailed analysis of the stress field at the matrix-fiber interface for square and hexagonal packing of the fibers is carried out for different values of the number, orientation angles and concentration of the elliptical fibers. The accuracy and efficiency of the method are examined through comparison with results obtained from analytical and finite element methods.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.4
• /
• pp.5-20
• /
• 2022

To analyze the flow and density variations in debris flows, a two-phase finite volume model simplified with momentum equations was constructed in this study. The Hershel-Buckley rheology model was employed in this model to account for the internal and basal friction of debris flows and was utilized to analyze complex topography and entrainments of basal soil beds. In order to numerically solve the debris flow analysis model, a finite volume model with the Harten-Lax-van Leer-Contact method was used to solve the conservation equation for the debris flow interface. Case studies of circular dam failure, non-Newtonian fluid dam failure, and multiple debris flows were analyzed using the proposed model to evaluate shock absorption capacity, numerical isotropy, model accuracy, and mass conservation. The numerical stability and correctness of the debris flow analysis of this analysis model were proven by the analysis results. Additionally, the rate of debris flow with various rheological properties was systematically simulated, and the effect of debris flow rheological properties on behavior was analyzed.

• Journal of Convergence for Information Technology
• /
• v.9 no.12
• /
• pp.147-156
• /
• 2019

Numerical study was performed to investigate the convective heat transfer of Al₂O₃/water nanofluid flowing through the concentric double pipe counterflow heat exchangers. Hot fluid flowing through the inner pipe transfers its heat to cooling fluid flowing in the outer pipe. Effects of important parameters such as hot and cold volume flow rates, fluid type in the outer and inner pipes, and nanoparticles concentration on the heat transfer and flow characteristics are investigated. The results indicated that the heat transfer performance increases with increasing the hot and cold volume flow rates, as well as the particle concentrations. When both outer and inner pipes are nanofluids with 8% nanoparticle volume concentration, nanofluids showed up to 17% better heat transfer rate than basic fluids. Also, the average heat transfer coefficient of the base fluid for annulus-side improved by 31%. Approximately 20% enhancement in the heat exchanger effectiveness can be achieved with the addition of 8% alumina particles in base fluid. But, addition of nanoparticles to the base fluid enhanced friction factor by about 196%.

• Computational Structural Engineering
• /
• v.10 no.2
• /
• pp.213-223
• /
• 1997

Calculation of elastic wave fields has important applications in a variety of engineering fields including NDE (Non-destructive evaluation). Scattering problems have been investigated by numerous authors with different solution schemes. For simple geometries of the scatterers (e.g., cylinders or spheres), the analysis of steady-state elastic wave scattering has been carried out using analytical techniques. For arbitrary geometries and multiple inclusions, numerical methods have been developed. Special finite element methods, e.g., the infinite element method and a hybrid method called the Global-Local finite element method have also been developed for this purpose. Recently, the boundary integral equation method has been used successfully to solve scattering problems. In this paper, a volume integral equation method (VIEM) is proposed as a new numerical solution scheme for the solution of general elasto-dynamic problems in unbounded solids containing multiple inclusions and voids or cracks. A boundary integral equation method (BIEM) is also presented for elastic wave scattering problems. The relative advantage of the volume and boundary integral equation methods for solving scattering problems is discussed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1634-1638
• /
• 2008

하천의 2차원 흐름 해석, 유사이동 해석, 오염확산 해석을 위한 유체의 수치해석법에는 유한요소법, 유한차분법, 유한차분법의 변형인 유한체적법, 경계적분법 등이 있다. 유체에 대한 수치해석 기법으로 전통적으로 가장 많이 사용되고 있는 방법은 유한차분법이지만, 비구조적 요소망(unstructured mesh)을 이용하여 복잡한 형상을 표현하기가 상대적으로 용이한 유한요소법이 다양한 형태의 하천 해석에는 더욱 적합할 것이다. 본 연구에서는 비구조적 요소망을 advanced front method를 이용하여 생성해 보았다. Advanced front method는 해석하고자 하는 영역에 적절한 절점들을 생성한 후 삼각 요소망을 구성하는 grid based advanced front method와 절점들을 생성하지 않고 해석 영역에 삼각 요소를 바로 구성하는 element based advanced front method로 나눌 수 있다. Grid based advanced front method에서 해석 영역에 적절한 절점을 생성하는 방법으로는 일반적인 격자 구조의 절점 생성 방법을 적용하였으며 경계와의 거리가 가까운 절점은 생성되지 않으며, 삼각 요소를 구성할 때에는 두 개의 인접 절점을 비교하여 최적의 삼각 요소를 구성하게 된다. 단 두 개의 인접 절점만을 비교함으로서 비교적 빠른 시간 안에 최적의 삼각 요소망을 구성할 수 있다. 삼각 요소망을 생성한 후에는 Laplacian smoothing을 이용하여 삼각 요소망의 형질을 개선하였다. Element based advanced front method는 외부 경계에서부터 시작된 Front가 내부 영역으로 확대되어지며 각 Front에서 적절한 절점을 직접 생성하여 바로 삼각 요소를 구성하게 된다. Front에서 생성된 절점은 인접 절점들이 있는지 검색하여 인접 절점이 있다면 생성된 절점은 삭제되어지며 인접 절점이 삼각 요소를 위한 나머지 한 점으로 채택되어진다. Front는 외부 경계와 교차되어지지 않아야 하며 또한 연속된 Front를 효율적으로 관리하기 위해 list 자료 구조를 활용하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.8
• /
• pp.677-684
• /
• 2007

In the Present Study, a 3-D viscous flow solver, based on unstructured hybrid meshses containing tetrahedra, prisms and pyramids, has been developed. A finite-volume discretization scheme is used for solving the compressible Navier-Stokes equations. A cell-vertex median dual volume is used for spatial discretization. The one-equation Spalart-Allmaras turbulence model has been adopted to evaluate the eddy viscosity. Validation were made by computing laminar and turbulent flows around a 3-D wing for steady flows and turbulent flows around an oscillating 3-D wing in harmonic motion for unsteady flows.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.619-621
• /
• 2005

햅틱 장치를 이용한 변형체의 실시간 시뮬레이션은 가상현실을 구축하기 위한 중요한 기술의 하나로서 최근에 크게 각광받고 있다. 본 연구에서는 햅틱 장비와 변형체의 정확한 인터페이스를 구축하기 위하여 변형체의 물리적 특성을 고려한 연속체적 모델인 유한요소법을 통한 선행해석을 수행한다. 변형체와 햅틱 장치의 상호작용 과정에서 발생하는 변형과 반력을 사용자에게 실시간으로 제공하기 위하여 선행해석 결과를 이용한 변형체의 정적 시뮬레이션을 구현한다. 이와 함께 햅틱 장치와 접촉이 이루어지는 부분의 변형을 보다 자연스럽게 표현하기 위하여 적응적 유한요소법인 s-adaptive 방법을 적용하였으며 햅틱 장치와 접촉이 끝난 후의 변형체가 평형 상태로 돌아가는 과정을 모사하기 위하여 Newmark scheme을 통한 동적 시뮬레이션을 구현한다. 또한 최적화 행렬 연산 함수인 BLAS와 LAPACK을 이용하여 행렬 연산을 빠르게 수행하고 효율적인 메모리 사용 추구한다.

• Composites Research
• /
• v.36 no.6
• /
• pp.395-401
• /
• 2023

In this study, finite element modeling of unidirectional composite materials of the computed tomography (CT) was conducted using a supervised learning-based segmentation technique. Firstly, Micro-CT scan was performed to obtain the raw volume of unidirectional composite materials, providing microstructure information. From the CT volume images, actual microstructure of the cross-section of unidirectional composite materials was extracted by the labeling process. Then, a U-net deep learning model was trained with a small number of raw images as inputs and their labeled images as outputs to generate a segmentation model. Subsequently, most of remaining images were input to the trained U-net deep learning model to segment all raw volume for identifying complex microstructure, which was used for the generation of finite element model. Finally, the fiber volume fraction of the finite element model was compared with that of experimentally measured volume to validate the appropriateness of the proposed method.

• Journal of the Korea Computer Graphics Society
• /
• v.15 no.1
• /
• pp.1-6
• /
• 2009

This paper presents a new CIP method for unstructured mesh to reduce the numerical dissipation. To reflect precise physical characteristics, CIP method updates both the physical quantity and the derivative information. The proposed method uses the Finite Volume Method(FVM) to solve the non-advection term of CIP equation. And we performed several experiments to improve the accuracy of third-order interpolation. Our result shows that our algorithm has less numerical dissipation than that of linear advection solver.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.1
• /
• pp.16-27
• /
• 2002

A level-set method is used for analyzing the behaviors of gas bubbles in two fluids incompressible viscous flow domain. The governing equations are solved by using a finite volume method. The numerical results are verified by comparing with the experimental and other computational results. Computations for the deformations and motions of one or multi-bubbles in the flow domain with the initial undisturbed free interface are conducted. It can be seen that numerical results for different surface tension and density ratio arise very different behaviors of bubbles. When bubbles rise near the free interface, the free interface gives some great influence on the behaviors of bubbles. The present results computed by a level-set method give useful information about the properties of bubble motions and deformations.