• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.19-22
• /
• 2016

본 연구는 박각시 나방 유연날개의 준정상 공력 모델링을 위한 공력측정실험을 진행하였다. 두 개의 서보모터로 이루어진 동역학적 로봇 모델은 3톤 수조 내부에서 날갯짓 운동을 구현하였고, 6축 센서가 날개 모델의 뿌리에 장착되어 공력 측정을 시행하였다. 날개 모델은 다른 두께의 폴리카보네이트 평판으로 제작되었고, 3mm 두께의 강체날개와 0.8mm 두께의 유연날개로 구성되었다. 공력측정은 각 날개 모델별 받음각을 -5도에서 95도까지 5도씩 변경하여 진행하였고, 이를 바탕으로 준정상 공력 모델링을 시도하였다. 날개 두께별 준정상 공력 모델링을 통해 특정 두께를 가진 유연날개는 강체날개보다 높은 공력효율을 가짐을 알 수 있었고, 날개 유연도 역시 준정상 가정을 기반으로 모델링 할 수 있을 것으로 기대된다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.6
• /
• pp.448-457
• /
• 2013

This paper presents the design of an active flutter suppression system for flexible wing using sliding mode control method. The aerodynamic force generated by the motion of a flexible wing control surface is utilized as control force. For this purpose, aeroservoelastic model is formulated by blending aeroelastic model, control surface actuator model, and gust model. A sliding mode controller is designed for active flutter suppression on the aeroservoelastic model in conjunction with Kalman filter that estimates the system states based on the measured output. The performance of the designed controller is demonstrated via numerical simulation for the representative flexible wing model.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.3
• /
• pp.185-195
• /
• 2021

The flapping-wing micro air vehicle (FW-MAV) in this study utilizes the cambered wings made of quite flexible material. Similar to the flying creatures, the present cambered wing uses three different materials at its leading edge, vein, and membrane. And it is constrained in various conditions. Since passive rotation uses the flexible nature of the wing, it is important to select an appropriate material for a wing. A three-dimensional fluid-structure interaction solver is developed for a realistic modeling of the cambered wing. Then a parametric study is conducted to evaluate the aerodynamic performance in terms of the elastic modulus of leading edge and vein. Consequently, the elastic modulus plays a key role in enhancing the aerodynamic performance of FW-MAVs.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.488-491
• /
• 2010

본 논문에서는 돌풍응답경감제어 효과 검증을 위한 풍동시험에 사용될 유연날개에 대해 공탄성 모델, 조종면 작동기 모델, 돌풍 모델 등으로 구성되는 서보공탄성 모델링을 수행하였으며, 이에 대한 연속돌풍 응답해석을 수행하여 상용 Solver를 이용한 해석결과와 비교하여 구성된 서보공탄성 모델을 검증하였다. 또한, 유연날개의 돌풍응답을 경감하는 조종면 제어기를 설계하고, 이에 대한 수치 시뮬레이션을 수행하여 돌풍응답 경감효과를 검증하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.7
• /
• pp.601-608
• /
• 2015

The static aeroelastic analysis and optimization of flexible wings are conducted for steady state conditions while both aerodynamic and structural parameters can be used as optimization variables. The system of multidisciplinary design optimization as a robust methodology to couple commercial codes for a static aeroelastic optimization purpose to yield a convenient adaptation to engineering applications is developed. Aspect ratio, taper ratio, sweepback angle are chosen as optimization variables and the skin thickness of the wing. The real-coded adaptive range multi-objective genetic algorithm code, which represents the global multi-objective optimization algorithm, was used to control the optimization process. The support vector regression(SVR) is applied for optimization, in order to reduce the time of computation. For this multi-objective design optimization problem, numerical results show that several useful Pareto optimal designs exist for the flexible wing.

• Journal of Aerospace System Engineering
• /
• v.9 no.2
• /
• pp.1-6
• /
• 2015

태양광 고고도 장기체공형 무인기나 인간동력 항공기 등에 사용되는 높은 종횡비를 가진 유연날개는 공력 및 구조 상호작용으로 인하여, 구조적 비선형 처짐 및 양력감소 등의 문제가 발생한다. 본 연구에서는 저속 비행하는 높은 종횡비를 가진 날개의 단방향 공력-구조 연계해석을 수행하였다. XFOIL을 사용하여 공력천이현상을 포함한 저 레이놀즈수 익형 공력특성 자료 확보를 기반으로 3차원 양력선 이론을 사용하여 공력해석 연구를 수행했다. 구조해석은 상용소프트웨어 ANSYS를 사용하여 구조변형이나 응력해석 연구를 수행했다. 단방향 공력-구조 연계해석 결과를 바탕으로 인간동력 항공기 주 날개의 형상설계 연구를 수행했다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.189-192
• /
• 2014

Recently, development of electric powered UAV for high altitude and long endurance mission has been conducted worldwide. Long endurance requirement necessitates high lift over drag (L/D) aerodynamic characteristics and lightweight structures, leading to highly flexible wings with high aspect ratio. These highly flexible wings increase the danger of catastrophic aircraft failure due to flutter, which is a dynamic aeroelastic instability occurring from the interaction of aerodynamic, inertial, and elastic forces acting on the aircraft flying through the air. In this paper, flexible wing for electric powered UAV whose skin is fabricated using mylar film for lightweight design is briefly explained. In addition, flutter analysis procedures and results for the flexible wing in order to substantiate the aeroelastic stability requirements are presented.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.99-104
• /
• 2005

For the efficient reliability analysis, Bi-direction two-point approximation(BTPA) method is developed which solves shortcomings of conventional two-point approximation(TPA) methods that generate an approximate surface with low accuracy or sometimes do an unstable approximate surface. The conventional reliability based design optimization(RBDO) methods require high computational cost compared with the deterministic design optimization(DO) methods. To overcome the computational inefficiency of RBDO, the approximate reliability analysis approaches on the TPA surface are proposed. Using these FORM and SORM analysis strategies, multi-point aerodynamic-structure interacted shape design optimizations with uncertainty are performed very efficiently.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.522-527
• /
• 2013

In this study, dynamic response control of a flexible wing such as gust loads alleviation using sliding mode control method is presented. To achieve this purpose, trailing edge control surface of a flexible wing is used as control means generating the aerodynamic control force. Aeroservoelastic CASE) model consisting of aeroelastic plant, control surface actuator model, and gust model depicting the atmospheric turbulence is formulated in the state space. A sliding mode controller based on the estimated state vector is designed for active dynamic response control of flexible wing aeroservoelastic model. The performance of the controller designed is demonstrated via numerical simulation for the representative flexible wing model under atmospheric turbulence loading.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.218-219
• /
• 2013