• Journal of Korea Water Resources Association
• /
• v.34 no.5
• /
• pp.487-497
• /
• 2001

Investigated data on Lake Okjeong were used for the simulation of water quality. According to the simulation results, the effective scheme of water quality management on reservoir has been proposed. It has been recognized that the water quality of Lake Okjeong is under eutrophic and mesotrophic condition even though there are seasonal variation. The water quality of lake is mainly affected by the inflow of pollutant load from watershed. Therefore, to estimate and quantify the accurate amounts of pollutants flowing into reservoir is absolutely necessary for the effective management of water quality on Lake Okjeong. When the pollutant load measured during 7 different rainy periods in 1999 was compared with total pollutant load in 1999. TN and TP measured during 7 different rainy periods showed almost 50% of total pollutant load. In case of SS, it was 72.8%. On the other hand, the rainfall amount measured during the 7 different rainy periods was about 17.5% of total rainfall amount in 1999. Release rate of TP shows 11.92 mg/L at fish farm site and 0.2∼1.9 mg/L at monitoring station of water quality on Lake Okjeong, and which is considered to be less than that of other foreign reservoirs under the circumstances of anoxic condition. For the effective management of water quality on Lake Okjeong. WASP5 water quality simulation model has been applied and verified, and the verified model was used to propose the effective scheme of water quality management. In this case, 6 different scenarios were applied, by changing the amount of inflow of pollutant load in each subbasin. The most effective scheme has turned out that pollutant load generated from Imsil and Gwanchon subbasin should be reduced, and the best way to improve the water a quality is to reduce the pollutant load at every subbasin. According to the simulation result, wastewater treatment facility should be located at every subbasin.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.1
• /
• pp.38-46
• /
• 2012

This study carried out current status, characteristics, and problems of coastal environment management on semi-enclosed Masan Bay in Korea and suggests cost-effective and eco-friendly water quality management policy. The pollutants from terrestrial sources into the Bay have apparently environmental pollution problems, such as eutrophication, red tide, and hypoxia. The carrying capacity of the Bay is estimated by hydrodynamic model and ecosystem model, material circulation including bivalve in ecosystem is analyzed by the growth model of bivalve. The resulting reduction in the input load was found to be 50~90%, which is unrealistic. When the efficiency of water quality improvement through bivalve farming was assessed based on the autochthonous COD, 30.7% of the total COD was allochthonous COD and 69.3% was autochthonous COD. The overall autochthonous COD reduction rate by bivalve aquaculture farm was found to be about 6.7%. This study indicate that bivalve farming is about 31% less expensive than advanced treatment facilities that remove both nitrogen and phosphorous.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.169-177
• /
• 2012

In the development process of application systems, the most important works are analysis and design. Most of the application systems are implemented on database system. So, database design is important. Also, IT System are confronted with more and more attacks by an increase interconnections between IT systems. Therefore security-related processes belong to a very important process. Security is a complex non-functional requirement that can interaction of many parts in the system. But Security is considered in the final stages of development. Therefore, Their increases the potential for the final product to contain vulnerabilities. Accordingly, Early in development related to security analysis and design process is very important. J2EE gives a solution based on RBAC((Role Based Access Control) for security and object-relational database also has RBAC for security. But there is not a object-oriented analysis and design methodology using RBAC of J2EE and object-relational database for security. In this paper, the unified object-oriented analysis and design methodology is developed for security-critical web application systems based on J2EE and object-relational database. We used UMLsec and RBAC of object-relational database and J2EE for this methodology.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.53-64
• /
• 2012

In this study, the modified cyclic triaxial tests with Joomunjin standard sand are performed for dynamic deformation characteristics, such as Young's moduli and damping ratio. The cyclic triaxial test is equipped with Local Displacement Transducer (LDT) on the outside of a cell which has a range from $10^{-4}$ to $10^{-1}$ of shear strains, ${\gamma}$ (%), instead of conventional cyclic triaxial test which has linear variable displacement transducer (LVDT) with low precision. With the small strain control, tests were carried out at various loading rates, void ratios, and effective confining pressures. Based on the test results, such as dynamic deformation characteristics, shear modulus, and damping ratio, it is found that the test can measure more range of medium strains (0.02-0.2%) than results obtained from conventional test (resonant column test). For the medium strain range, dynamic deformation characteristics investigated by the cyclic triaxial test are also different from those predicted by nonlinear model in conventional test.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.389-394
• /
• 2019

In this study, a functional inorganic insulation as TiO₂ and inorganic wet fly ash were used to evaluate the physical performance and thermal environment of an exterior finish that can improve the thermal environment of a building. The performance evaluation of the finish was based on the KS F 4715 thin coating material and the thermal environment. When TiO₂ was added, the physical performance was lowered at 10% or more, and the inorganic wet-treated fly ash increased the physical performance by 10%. In the thermal environmental evaluation, the surface temperature reduction effect of the inorganic wet-treated fly ash was low, but when used in combination with TiO₂, it was effective to reduce the surface temperature and the internal temperature. As a result, the optimum combination of TiO₂ and inorganic wet-treated fly ash for thermal environment control was found to be optimal when 5% of each mixture was used.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.4 s.19
• /
• pp.9-15
• /
• 2005

This research developed the RMIS(Risk Management Information System) which focus on works of risk management fields required of apply of a space information, and focus on the DB to establish and apply the space information efficiently with research scope on the LPG refueling station in city. On the basis of the RMIS, this research provides the baseline to lead on an efficiency of safety inspection of LPG refueling station, advance risk assessment, and efficient making decision of an accident correspondence assessment with interlocking the GIS representing risk through the automation of a quantitative risk assessment standardize requirement to control at real-time. The RMIS development process is as follows. firstly, Relational Database(RDB) was developed by using fundamental data both On-site and Off-site relating data as peforming risk assessment on the LPG refueling station in city. Second, the risk management integral database system was developed to monitor and control the risk efficiently for user with using the Visual Basic Program. Third, through interlocking the risk management integral database system and the GIS(Falcon-map) was suggested the decision making method. Represented results through out the RMIS program development are as follows. Firstly, the RMIS was established the mutual information to advance management the risk efficiently for user and inspector with using the risk management data. Second, as this study managed risk for on-site and off-site separately and considered effect for inside and outside of facility, constructed the basis on safety management which can respond to major accident. Third, it was composed the baseline to making decision that on the basis of user interface.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.6
• /
• pp.727-737
• /
• 1999

프로세스 중심 소프트웨어 개발 환경(PSEE : Process-centered Software Engineering Environment)은 소프트웨어 개발자를 위한 여러가지 정보의 제공과 타스크의 수행, 소프트웨어 개발 도구의 수행 및 제어, 필수적인 규칙이나 업무의 수행등과 같은 다양한 행위를 제공하는 프로세스 모형의 수행을 통하여 소프트웨어 개발 행위를 지원한다. SEED(Software Engineering Environment for Development)는 효율적인 소프트웨어 개발과 프로세스 모형의 수행을 제어하기 위해 ETRI에서 개발된 PSEE이다.본 논문에서는 SEED에서 프로세스 모형을 설계하기 위해 사용되는 SimFlex 프로세스 프로그래밍 언어와, 수행지원시스템인 SEED Engine의 구현에 대하여 기술한다. SimFlex는 간단한 언어 구조를 가진 프로세스 프로그래밍 언어이며, 적절한 적합화를 통하여 다른 PSEE에서 사용될 수 있다. SimFlex 컴파일러는 SimFlex에 의해 기술된 프로세스 모형을 분석하고, 모형의 오류를 검사하며, SEED Engine에 의해 참조되는 중간 프로세스 모형을 생성한다. 중간 프로세스 모형을 사용하여 SEED Engine은 외부 모니터링 도구와 연관하여 사용자를 위한 유용한 정보뿐만 아니라 SimFlex에 의해 기술된 프로세스 모형의 자동적인 수행을 제공한다. SimFlex 언어와 수행지원 시스템의 지원을 통하여 소프트웨어 프로세스를 모형화하는데 드는 비용과 시간을 줄일 수 있으며, 편리하게 프로젝트를 관리하여 양질의 소프트웨어 생산물을 도출할 수 있다. Abstract Process-centered Software Engineering Environments(PSEEs) support software development activities through the enaction of process models, providing a variety of activities such as supply of various information for software developers, automation of routine tasks, invocation and control of software development tools, and enforcement of mandatory rules and practices. The SEED(Software Engineering Environment for Development) system is a PSEE which was developed for effective software process development and controlling the enactment of process models by ETRI.In this paper, we describe the implementation of the SimFlex process programming language used to design process models in SEED, and its runtime support system called by SEED Engine. SimFlex is a software process programming language to describe process models with simple language constructs, and it could be embedded into other PSEEs through appropriate customization. The SimFlex compiler analyzes process models described by SimFlex, check errors in the models, and produce intermediate process models referenced by the SEED Engine. Using the intermediate process models, the SEED Engine provides automatic enactment of the process models described by SimFlex as well as useful information for agents linked to the external monitoring tool. With the help of the SimFlex language and its runtime support system, we can reduce cost and time in modeling software processes and perform convenient project management, producing well-qualified software products.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.66-76
• /
• 2009

The motion estimation in video encoding system occupies the biggest part. So, we require the motion estimator with efficient structure for real-time operation. And for motion estimator's implementation, it is desired to design hardware module of an exclusive use that perform the encoding process at high speed. This paper proposes motion estimation detection block(MED), 41 SADs(Sum of Absolute Difference) calculation block, minimum SAD calculation and motion vector generation block based on parallel processing. The parallel processing can reduce effectively the amount of the operation. The minimum SAD calculation and MED block uses the pre-computation technique for reducing switching activity of the input signal. It results in high-speed operation. The MED and 41 SADs calculation blocks are composed of adder tree which causes the problem of critical path. So, the structure of adder tree has changed the most commonly used ripple carry adder(RCA) with carry skip adder(CSA). It enables adder tree to operate at high speed. In addition, as we enabled to easily control key variables such as control signal of search range from the outside, the efficiency of hardware structure increased. Simulation and FPGA verification results show that the delay of MED block generating the critical path at the motion estimator is reduced about 19.89% than the conventional strukcture.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.299-305
• /
• 2019

This study was initiated to solve the difficulties of aged and female workers in agriculture society due to aging and demise of young people. In the case of the conventional elevated lift, the risk of exposure to uneven road or work environment, not the difficulty of professional qualification and operation, and the risk of exposure to the uneven road or working environment, were also studied based on previous researches so that women could easily and efficiently perform productive agriculture. First, the simulation was carried out through the prediction model of traction performance using the object of agricultural forklift, and the soil of the Kimhae city in Gyeongnam (34.125kPa, internal friction angle 35.294deg, external friction angle 13.620deg, Adhesion force 5.750 kPa, average cone index 0-15 cm cl, 1001.8 kPa). In the case of the forklift for simulation, the driving force and the kinetic resistance prediction modeling of the agricultural electric forklift are modeled. Based on this model, the motor control drive adopts the 1232E model, which is a drive dedicated to AC motor, and divides the two drivers into master and slave And the model for the simulation was designed to control motor drive, hydraulic drive, and various outputs on the main PCB. The simulation model is undergoing continuous simulation, modification and supplementation. Based on this research, we will continue research for development of safer and more efficient agricultural electric forklift.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.328-334
• /
• 2019

Shading paint (water-soluble) is one of the temperature control agents inside of a greenhouse in summer. Plastic film rain shelter is a unique system in Korean, prevents disease development vineyards, but it causes the heat inside a shelter in summer. Shading paint treatment with different shading rates (15, 25, and 35%) outside of plastic rain shelter avoided excessive heat inside. Shading paint influenced sunlight under plastic rain shelter in a different manner at each treatment. 35% of shading paint treatment reduced 45% of PPFD (Photosynthesis Photon Flux Density) than non-treatment control. Shading paint had the significance of efficiency to reduce the temperature under plastic rain shelter. 35% of shading paint treatment reduced $2^{\circ}C$ of bunch temperature than non-treatment control. However, shading paint treatment had not to control lower than ambient temperature. 35% of shading paint treatment is available to prevent excessive heat damage and poor fruit quality under plastic film rain shelter in summer in Korean vineyards.