Dynamic Deformation Characteristics of Joomunjin Standard Sand Using Cyclic Triaxial Test |
Kim, You-Seong
(Dept. of Civil Engineering, Chonbuk National University)
Ko, Hyoung-Woo (Dept. of Civil Engineering, Chonbuk National University) Kim, Jae-Hong (Dept. of Civil Engineering, Chonbuk National University) Lee, Jin-Gwang (Dept. of Civil Engineering, Chonbuk National University) |
1 | Idriss, I. M. (1993), "Assessment of Site Response Analysis Procedure", Report No. NIST GCR 95-667, National Institute of Standards and Technology, U.S. Department of Commerce, Gaithersburg, MD, Center for Geotechnical Modelling, Department of Civil & Environmental Engineering, University of California, David. |
2 | Ishihara, K. (1996), "Pore pressure generation characteristics of gravel under undrained cyclic loading", Ph.D. Dissertation, Unicersity of California, Berkeley. |
3 | Iwasaki, T., Tatsuoka, F. and Takagi, T. (1978), "Shear Moduli of Sands under Cyclic Torsional Shear Loading", Soils and Foundations, Vol.18, No.1, pp.39-56. DOI |
4 | JGS 0542-2000, "Method for Cyclic Triaxial Test to Determine Deformation Properties of Geomaterials", The Japanese Geotechnical Society. |
5 | Kim, D. (1991), "Deformational characteristics of soils at small to intermediate strain from cyclic tests" Ph.D Dissertation, The University of Texas at Austin, US. |
6 | Kim, D. S. (1995), "Deformational Characteristics of Dry Sand Using Resonant Column/Torsional Shear Testing", Journal of the Korean Geotechnical Society(KGS), Vol.11, No.1, pp.101-112. 과학기술학회마을 |
7 | Kim, D. S. and Choo, Y. W. (2004), "Cyclic Threshold Shear Strains of Sands Based on the Buildup of Pore Water Pressure and Variations of Deformation Characteristics", Journal of the Korean Society of Civil Engineering(KSCE), Vol.24, No.3, pp.193-203. 과학기술학회마을 |
8 | Kim, J. M., Park, Y. H., and Lim, S D. (2009), "Dynamic Shear Properties of Nak-Dong River Sand Determined by Resonant Column/Torsional Shear Test", Journal of the Korean Geotechnical Society(KGS), Vol.25, No.11, pp.5-15. 과학기술학회마을 |
9 | Kokusho, T. (1980), "Cyclic triaxial test of dynamic soil properties for wide strain range" Soils and Foundations, Vol.20, No.2, pp.45-60. |
10 | KSF 2345 (2010), Testing Method for Relative Density of Cohesionless Soils, Ministry of Land, Transport and Maritime Affairs, Testing Standard. |
11 | Lee, S. J., Kim, Y. K., Choo, Y. W., Lee, S. H., and Kang, T. H. (2010), "Development and Verification of Large Triaxial Testing System for Dynamic Properties of Granular Materials", Journal of the Korean Geotechnical Society(KGS), Vol.26, No.12. pp.5-17 과학기술학회마을 |
12 | Lo Presti (1989), "Proprieta dinamiche dei terreni", Proc. 14th Conf. Geotech. Turin. |
13 | Park, D. K. (2002), "A Suggestion of an Empirical Equation for Shear Modulus Reduction Curve Estimation of Sandy Soils", Journal of the Korean Geotechnical Society(KGS), Vol.18, No.3, pp.127-138. 과학기술학회마을 |
14 | Park, I. B., Park, C. S., and Mok, Y. J. (2009), "Verification of the Large Scale, Free-free Resonant Testing Equipment using Jumunjin Sand", International Symposium on Urban Geotechnics, pp.1415-1424. 과학기술학회마을 |
15 | Port and Harbour Research Institute(PHRI) (1997), Handbook in Liquefaction Remediation of Reclaimed Land, A.A.Balkema, Rotterdam, Brookfield, pp.57-67. |
16 | Ramberg, W. and Osgood, W. R. (1943), "Description of Stress- Strain Curves by the Three Parameters" Technical Note 902, National Advisory committee for Aeronautics, Washington, D.C. |
17 | Rollins, K. M., Evans, M. D., Diehl, N. B. and Daily, W. D. (1998), "Shear modulus and damping relationships for gravels" Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.124, No.5, pp.396-405. DOI ScienceOn |
18 | Seed, H. B. and Idriss, I. M. (1970), "Soil Moduli and Damping Factors for Dynamic Response Analysis" Report No. EERC 70-10, Earthquake Engineering Research Center, Univ. of California, Berkeley, Sept., pp.37. |
19 | Choo, Y. W. and Kim, D. S. (2005), "Dynamic Deformation Characteristics of Sands Under Various Drainage Conditions", Journal of the Korean Geotechnical Society(KGS), Vol.21, No.3, pp.27-42. 과학기술학회마을 |
20 | Burland, J. B. (1989), "Small is Beautiful-the Stiffness of Soils at Small Strains," Canadian Geotechnical Journal, Vol.26, pp.499-516. DOI |
21 | Dobry, R. and Vucetic, M. (1987), "State-of-the-art report: dynamic properties and response of soft clay deposits" Proceeding of International Symposium on Geotechnical Engineering Soft Soils, Vol.2, pp.51-87. |
22 | Goto, S., Tatsuoka, F., Shibuya, S., Kim, Y. S., and Sato, T. (1991), "A simple Guage for Local Small Strain measurements in the Laboratory", Soil and Foundations, Vol.31, No.1, pp.136-151. |
23 | Hardin, B. O. (1978), "The Nature of Stress-Strain Behavior of Soil", Proceedings, Geotech. Eng. Div. Specialty Conference on Earthquake Eng. and Soil Dynamics, Pasadena, CA, ASCE, Vol.1, pp.3-90. |
24 | Hardin, B. O. and Black, W. L. (1968), "Vibration modulus of normally consolidated clay" Journal of Soil Mechanics and Foundations, ASCE, Vol.94, No.SM2, pp.353-369. |
25 | Hardin, B. O. and Drnevich, V. P. (1972), "Shear Modulus and Damping in Soils : Design Equations and Curves" Journal of SMF Div., ASCE, Vol.98, No.SM7, pp.667-692. |
26 | Hardin, B. O. and Richart, F. E. (l963), "Elastic Wave Velocities in Granular Soils" Journal of the Soil Mechanics and Foundations, ASCE, Vo1.9, No.SM1, pp.33-65. |
27 | Vucetic, M and Dobry R. (1991), "Effect of soil plasticity on cyclic response" Journal of Geotechnical Engineering, ASCE, Vol.117, No.1, pp.89-107. DOI |
28 | Seed, H. B., Wang, R. T., Idriss, I. M. and Tokimatsu, K. (1984), "Moduli and Damping Factors for Dynamic Analysis of Cohesionless Soils" Report No. UCB/EERC-84/14, University of California, Berkeley |
29 | Shibata, T. and Soelarno, D. S. (1975), "Stress-Strain Characteristics of Sands Under Cyclic Loading" Proc. JSCE, Vol.239, pp.57-65 (in Japanese). |
30 | Stone, W. C., Yokel, F. Y., Celebi, M., Hanks, T., and Leyendecker, E. V. (1987), "Engineering aspects of the September 19, 1985 Mexico earthquake" NBS Building Science Series 165, National Bureau of Standard, Washington, D.C. pp.207. |