• Title/Summary/Keyword: 완전일치

Search Result 269, Processing Time 0.028 seconds

An Improvement of the Extended Jones Matrix Expression for Analyzing Polarization Transmission Characteristics of a Uniaxial Medium (이방성 매질의 편광투과특성 분석을 위한 확장된 존스 행렬식의 개선)

  • Ryu, Jang-Wi;Shin, You-Sik;Kim, Sang-Youl;An, Sung-Hyuck;Kim, Yong-Ki
    • Korean Journal of Optics and Photonics
    • /
    • v.19 no.2
    • /
    • pp.150-158
    • /
    • 2008
  • The exact transmission coefficients at the interface between a uniaxial anisotropic medium and an isotropic medium at? oblique incidence are derived by applying the extended Jones matrix method. When the birefringence of the uniaxial anisotropic medium is small ($|n_e-n_o|\;{\ll}\;n_o,\;n_e$), the exact transmission coefficients are compared with those by the conventional extended Jones matrix method by Yeh et al. They showed an excellent agreement with each other. In addition, using the exact transmission coefficients, we calculated the polarization characteristics of a light through a uniaxial medium to an incident light with arbitrary polarization state at? oblique incidence. We compared the transmittances of an unpolarized light through a pair of crossed o-type polarizers by two different methods and calculated the transmittance as the variation of the optical constants of the polarizers to evaluate of the extinction ratio. The polarization analysis method using the exact transmission coefficients can be applied to polarization characteristics of a light through a uniaxial medium with large birefringence as well as to liquid crystals and to optical anisotropic material.

Soil-Water Characteristic Curve of Sandy Soils Containing Biopolymer Solution (바이오폴리머를 포함한 모래지반의 흙-습윤 특성곡선 연구)

  • Jung, Jongwon
    • Journal of the Korean GEO-environmental Society
    • /
    • v.19 no.10
    • /
    • pp.21-26
    • /
    • 2018
  • Soil-water characteristic curve, which is called soil retention curve, is required to explore water flows in unsaturated soils, relative permeability of water in multi-phase fluids flow, and change to stiffness and volume of soils. Thus, the understanding of soil-water characteristic curves of soils help us explore the behavior of soils inclduing fluids. Biopolymers are environmental-friendly materials, which can be completely degraded by microbes and have been believed not to affect the nature. Thus, various biopolymers such as deacetylated power, polyethylene oxide, xanthan gum, alginic acid sodium salt, and polyacrylic acid have been studies for the application to soil remediation, soil improvement, and enhanced oil recovery. PAA (polyacrylic acid) is one of biopolymers, which have shown a great effect in enhanced oil recovery as well as soil remediation because of the improvement of water-flood performance by mobility control. The study on soil-water characteristic curves of sandy soils containing PAA (polyacrylic acid) has been conducted through experimentations and theoretical models. The results show that both capillary entry pressure and residual water saturation dramatically increase according to the increased concentration of PAA (polyacrylic acid). Also, soil-water characteristic curves by theoretical models are quite well consistent with the results by experimental studies. Thus, soil-water characteristic curves of sandy soils containing biopolymers such as PAA (polyacrylic acid) can be estimated using fitting parameters for the theoretical model.

The Simultaneous Nitrification and Organics Oxidation of Wastewater in Airlift Biofilm Reactors (공기리프트 생물막 반응기에서의 폐수 질화 및 유기물 동시산화)

  • 서일순;허충희
    • KSBB Journal
    • /
    • v.16 no.6
    • /
    • pp.573-578
    • /
    • 2001
  • The effects of organic supplement (acetate) and dissolved oxygen concentration on the nitrification rate of wastewater were investigated in the 27.7 L pilot-scale airlift biofilm reactor with the granular activated carbon media of 0.613 mm diameter. The ammonium oxidation rate increased stepwise up to 5 kg N/㎥$.$d at the riser air velocity of 0.063 m/s, when the air velocity and the ammonium loading rate were raised alternately. The nitrite build-up was observed during the early stage of the biofilm formation, which disappeared after the reactor operation of 128 days. As increasing the organic loading rate, the organic oxidation rate increased up to 25.0 kg COD/㎥$.$d with the removal efficiency of 94% but the oxidation rates of ammonium and nitrite decreased. The oxidation rates of ammonium and nitrite increased with the dissolved oxygen concentrations. When the pure oxygen was sparged, the ammonium oxidation rate was almost five times higher than that with air at the same velocity.

  • PDF

Experimental and Analytical Evaluation of the Seismic performance of a Concrete Box Structure Strengthened with Pre-flexed Members (프리플렉스 부재를 이용한 콘크리트 박스 구조물 내진보강에 관한 실험 및 해석적 평가)

  • Ann, Ho-June;Song, Sang-Geun;Min, Dae-Hong;An, Sang-Mi;Kong, Jung-Sik
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.29 no.5
    • /
    • pp.397-403
    • /
    • 2016
  • During the rapid economic growth in Korea since the 1970s, many underground facilities were constructed such as under passes and railways. Seismic design has been mandated in 1988, but the structures built before 1988 were not reflected on the seismic design. Accordingly, these underground structures require effective seismic reinforcing methods to ensure safety when the earthquake happens. By these reasons, in this study, using the proposed pre-flexed members, RC box structure was analyzed for seismic reinforcement of the corner. This method is based on a principle that enlarging the resistance against the external force by installing the pre-flexed member to the box structure corner. To evaluate validity, a newly developed member with CornerSafe was compared with traditional type reinforcement using experiments and finite element analysis. In finite element mode, nonlinearity of steel was modeled based on J2 plasticity model and concrete was based on CEB FIP MODEL CODE 1990. Also, composite ratios of box and pre-flexed member were computed for design application. The reinforcement and box structure were analyzed under the bond condition completely attached by the tie, and the results of experiment and finite element analysis were same in the force-displacement curve.

A Study on the Makeup Trend of Digital Communication Environment (디지털 커뮤니케이션 환경의 메이크업 트렌드 연구)

  • Barng, Kee-Jung
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.37 no.1
    • /
    • pp.23-36
    • /
    • 2011
  • The purpose of this study is to make theoretical examinations into the makeup trend shown in digital communication environment and thereby determine potential associations of makeup trend with digital communication environment and characterize said trend, so that it can provide reference materials required for follow-up studies. This study comes to the following findings: First, it is found that there are sociocultural characteristics of digital communication environment, such as interactivity, technology-orientedness, sentiment-orientedness and mixture of time and space. Secondly, it is found that trends developed in makeup fall categorically into interactivity, virtuality, amusement and mobility. Thirdly, it is found that each type of digital communication adopts a mixture and juxtaposition of contemporary styles or categories with traditional ones through eclectic combination based on open-minded and horizontal ideas. Fourthly, it is found that a trend from digital communication environment doesn't coincide perfectly with any makeup trend, but the former trend works interactively and organically with the latter trend on the basis of homogeneity and similarity within a general framework that represents external esthetics of human being. With the creation of digital communication environment, our contemporary society forms as the complex phenomena of digital society in a combination and destruction of different categories beyond any certain international boundary, so that a hybrid tendency appears in contemporary makeup trend as well. Based on these findings, this study has its implications in the sense that it gives a new viewpoint based on design, formative characteristics and expression styles of makeup, and also provides useful reference materials for related industrial sectors.

Dependency of Phonon-limited Electron Mobility on Si Thickness in Strained SGOI (Silicon Germanium on Insulator) n-MOSFET (Strained SGOI n-MOSFET에서의 phonon-limited전자이동도의 Si두께 의존성)

  • Shim Tae-Hun;Park Jea-Gun
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.42 no.9 s.339
    • /
    • pp.9-18
    • /
    • 2005
  • To make high-performance, low-power transistors beyond the technology node of 60 nm complementary metal-oxide-semiconductor field-effect transistors(C-MOSFETs) possible, the effect of electron mobility of the thickness of strained Si grown on a relaxed SiGe/SiO2/Si was investigated from the viewpoint of mobility enhancement via two approaches. First the parameters for the inter-valley phonon scattering model were optimized. Second, theoretical calculation of the electronic states of the two-fold and four-fold valleys in the strained Si inversion layer were performed, including such characteristics as the energy band diagrams, electron populations, electron concentrations, phonon scattering rate, and phonon-limited electron mobility. The electron mobility in an silicon germanium on insulator(SGOI) n-MOSFET was observed to be about 1.5 to 1.7 times higher than that of a conventional silicon on insulator(SOI) n-MOSFET over the whole range of Si thickness in the SOI structure. This trend was good consistent with our experimental results. In Particular, it was observed that when the strained Si thickness was decreased below 10 nm, the phonon-limited electron mobility in an SGOI n-MOSFT with a Si channel thickness of less than 6 nm differed significantly from that of the conventional SOI n-MOSFET. It can be attributed this difference that some electrons in the strained SGOI n-MOSFET inversion layer tunnelled into the SiGe layer, whereas carrier confinement occurred in the conventional SOI n-MOSFET. In addition, we confirmed that in the Si thickness range of from 10 nm to 3 nm the Phonon-limited electron mobility in an SGOI n-MOSFET was governed by the inter-valley Phonon scattering rate. This result indicates that a fully depleted C-MOSFET with a channel length of less than 15 m should be fabricated on an strained Si SGOI structure in order to obtain a higher drain current.

A Study of the Architectural Characteristics Depicted on Andre Courrs Fashion Design (앙드레 꾸레쥬의 패션 디자인에 나타난 건축양식 특성연구)

  • Kyoung-Hee Cho
    • Journal of the Korean Society of Costume
    • /
    • v.23
    • /
    • pp.25-43
    • /
    • 1994
  • 앙드레 꾸레쥬는 자신의 디자인에 건축적 조형미를 표현한 대표적인 디자이너이다. 그의 디자인들은 라인 뿐 아니라 색채, 소재, 액세서리에 이르기까지 건물을 짓듯이 설계, 구성되어 있다. 최근 복식미의 건축적 조형성이 강조되고 있는 것을 감안할 때, 60년대 이미 선구자적인 역할을 하면서 자신의 건축가적인 기호를 유감없이 발휘해온 꾸레쥬를 연구한다는 것은 21세기를 향한 패션의 발전 측면에서 조금이라도 의미가 있지 않을까 생각한다. 본 연구에서는 앙드레 꾸fp쥬가 가장 활발히 활동했던 1974년에서 1970년까지 그의 디자인들을 집중 연구하였는데, 그의 패션디자인에 건축양식의 특징들이 어떻게 나타났는지에 연구의 초점을 맞추었다. 본 연구의 대상으로 사용된 실제의 옷 샘플들은 뉴욕 메트로폴리탄 예술박물관내의 Costume Institute Storage 에 있는 의복과 액세서리들을 직접, 관찰 , 분석한것이고 그 박의 사진들은 패션과 건축에 관한 서적과 잡지, 박물관내의 Slide Library , 그리고 Costume Institute Library Collection에서 발췌 , 비교 연구한 것이다. 일찍이 엔지니어링과 건축을 공부했던 앙드레 꾸레쥬는 50년대의 패션 디자이너의 거장 발렌시아가 밑에서 10년 넘게 일하다가 독립하였는데 그의 디자인 세계는 줄곧 여성들이 입고 편히 활동 할 수 있는 기능성을 강조하면서 단순하고 편안한 의복 구성에 중점을 두었다. 그리고 그는 이러한 자신의 패션 철학과 의복제작 과정들은 현대건물이 갖는 단순성, 기능성의 특징과 일치한다고 믿었다. A. 라인(Line) 앙드레 꾸레쥬는 패션 디자인에서의 비레는 건축에서구조를 쌓아가는 것과 같은 것이라고 생각하고 옷에서의 기본 구성을 기하학적인 라인에 두었다. 그래서 그의 옷들은 A-라인, 사각형, 사다리꼴,,, 등의 분명한 실루엣을 이루고 있는데 이러한 기본라인을 뒷받침이라도 하듯 소매가 아주 짧거나 없는 것이 특징이다. 황금분할이 아닌 1 : 1 구성은 그가 독특하게 사용한 비례방법의 하나인데 그것은 자켓과 스커트의 길이비례, 요크와 몸판간의 면적비례 등에서 잘 나타나고 있다. 그리고 그는 , 의복구성의 비례를 강조하기 위해 사용한 강한 색상의 대비를 현대건물의 인테리어에 빛을 사용하는 것과 같은 이치라고 설명한다. B.색상(Color) 흰색은 그러한 그의 비례강조 의복에 가장 적절한 색으로 사용되었다. 그는 빨강, 오렌지, 녹색, 분홍등 강렬한 원색을 사용하였는데도 불구하고 흰색은 그의 건축양식 발상의 Ideo를 완성시키는 완전한 색이었다. 뜨거운 날씨에 흰색이 가장 기능적인 색인 것처럼 강한 원색 대비를 통해 비례강조를 하면서 동시에 그것을 뒷받침하는 가장 합리적이고 기능적인 색은 흰색이라고 믿었다. C. 소재 (Material) 앙드레 꾸레쥬는 건물을 짓듯이 사람위에 옷을 건축한다고 믿었기 때문에 자연히 둔탁하고 딱딱한 소재가 많이 사용되었다. 비닐, 금속류, 시퀸스처럼 광택나고 투명한 재료 선호는 그 당시 현대 건축에서 선풍적으로 많이 사용되었던 유리, 금속류, 크리스탈 등 비치고 광택나는 건축재료와 일맥상통하는 것이다. 그러한 선국적인 내료 사용결과로 보여진 괴상하고 선정적인 그러면서도 아주 단순한 패션은 미래 지향적인 건축양식 구조의 " Simple", "Plain" 느낌과 정확하게 같은 것이다. 이상과 같이 앙드레 꾸레쥬는 옷을 디자인 했다기 보다는 건축했다. 주목할만한 점은 60년대 말 당시 발표되었던 그의 건축 구조적인 디자인의 특징들이 21세기를 앞둔 90년대에 다시 크게 유행하고있다는 점이다. 꾸레쥬 역시, 최근 자신의 디자인을 통해 건축적 조형미와 미래지향적 이미지를 더욱 강조하고 있는 것을 볼 수있다. 단순하면서 우주공간을 선회하는 듯한 입체적인 라인, 흰색을 비롯한 자연에 가까운 색을 중심으로 하되, 밝은 색조의 하이라이트, 플라스틱, 금속류와 같이 딱딱하고 광택나며 비치는 재료 사용,, 등등이 바로 그것이다. 그리고 이러한 그에 미래 지향적이고 조형적인 디자인들은 앞으로 어떻게 더 모험적인 모습으로 선보일지 우리 모두가 주목할만한 일인 것이다.

  • PDF

Shape Oscillation and Detachment of Droplet on Vibrating Flat Surface (진동하는 평판 위의 액적의 형상 진동 및 제거 조건에 대한 연구)

  • Shin, Young-Sub;Lim, Hee-Chang
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.38 no.4
    • /
    • pp.337-346
    • /
    • 2014
  • This study aimed to understand the mode characteristics of a droplet subject to periodic forced vibration and the detachment of a droplet placed on a plate surface. An surface was coated with Teflon to clearly observe the behavior of a droplet. The contact angle between the droplet and surface and the hysteresis were found to be approximately $115^{\circ}C$ and within $25^{\circ}C$, respectively. The coating process was performed in a clean room that had an environment with a low level of contaminants and impurities such as air dust, detergents, and particles. To predict the resonance frequency of a droplet, theoretical and experimental approaches were applied. Two high-speed cameras were configured to acquire side and top views and thus capture different characteristics of a droplet: the mode shape, the detachment, the separated secondary droplet, and the waggling motion. A comparison of the theoretical and experimental results shows no more than 18 discrepancies when predicting the resonance frequency. These differences seem to be caused by contact line friction, nonlinear wall adhesion, and the uncertainty of the experiment. For lower energy inputs, the contact line of the droplet was pinned and the oscillation pattern was axisymmetric. However, the contact line of the droplet was de-pinned as the oscillation became more vigorous with increased energy input. The size of each lobe at the resonance frequency is somewhat larger than that at the neighboring frequency. A droplet in mode 2, one of the primary mode frequencies, exhibits vertical periodic movement as well as detachment and secondary ejection from the main droplet.

Isolation and Identification of a New Gene Related to Salt Tolerance in Chinese Cabbage (배추에서 신규 염 저항성 관련 유전자 분리 및 검정)

  • Yu, Jae-Gyeong;Park, Young-Doo
    • Horticultural Science & Technology
    • /
    • v.31 no.6
    • /
    • pp.748-755
    • /
    • 2013
  • This study was conducted to find a salt tolerance gene in Brassica rapa. In order to meet this objective, we analyzed data from a KBGP-24K oligo chip [BrEMD (Brassica rapa EST and microarray database)] of the B. rapa ssp. pekinensis 'Chiifu' under salt stress (250 mM NaCl). From the B. rapa KBGP-24K microarray chip analysis, 202 salt-responsive unigenes were primarily selected under salt stress. Of these, a gene with unknown function but known full-length sequence was chosen to closely investigate the gene function. The selected gene was named BrSSR (B. rapa salt stress resistance). BrSSR contains a 285 bp open reading frame encoding a putative 94-amino acid protein, and a DUF581 domain. The pSL94 vector was designed to over-express BrSSR, and was used to transform tobacco plants for salt tolerance analysis. T1 transgenic tobacco plants that over-expressed BrSSR were selected by PCR and DNA blot analyses. Quantitative real-time RT PCR revealed that the expression of BrSSR in transgenic tobacco plants increased by approximately 3.8-fold. Similar results were obtained by RNA blot analysis. Phenotypic characteristics analysis showed that transgenic tobacco plants with over-expressed BrSSR were more salt-tolerant than the wild type control under 250 mM NaCl for 5 days. Based on these results, we hypothesized that the over-expression of BrSSR may be closely related to the enhancement of salt tolerance.

A Numerical Analysis of Sediment-laden Flow in Open Channel with Bed-load Effect (개수로에서 소유사의 영향을 고려한 부유입자 유동에 관한 수치적 연구)

  • Yun, Jun-Yong;Gang, Seung-Gyu;Gang, Si-Hwan
    • Journal of Korea Water Resources Association
    • /
    • v.33 no.4
    • /
    • pp.461-469
    • /
    • 2000
  • An numerical analysis of sediment-laden flow is carried out, and results are compared with the experiments of Coleman(1981, 1986) that included the several cases varying sediment size and quantity in open channel flow. K-$\omega$ turbulence model is selected for the fully turbulent flow field, and the concentration equation considering the fall velocity is adopted for the concentration field. The model of Einstein and Chien(1955) is applied to couple the velocity field and the concentration field. Most of researches have been carried out without considering the bed-load thickness, but it is found that the bed-load thickness cannot be ignored in case of a large amount of sediment or a large size of it. The bed-load thickness and surface roughness are considered in this study. Here, $\beta$ value, which is defined by the reciprocal of turbulent Schmidt number and is related with the concentration profile, is found to be varied according to the sediment size and quantity. Even though most of researchers have insisted that $\beta$ had always larger than 1.0, it may be concluded that $\beta$ can have smaller value than 1.0, that is coincident with the report of recent research.

  • PDF