• Journal of the Korean Society for Railway
• /
• v.10 no.3 s.40
• /
• pp.251-256
• /
• 2007

The research analyzed dynamo test results to evaluate compatibility between brake disk made of NCM-CV cast iron and various pads. The dynamo test was executed with one kind of resin pad and three kinds of sintered pads suitable for 200 km/h trains according to a program which refers to UIC 541-3. The thermocouples were established in specific location in order to measure the temperature of disk and pads. In addition, the thermal imaging camera was used for capturing the instantaneous thermal characteristic of disk. The research results may be utilized to use as basis data of pad development for NCM-CV brake disk hereafter.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.245-247
• /
• 2022

컨테이너선에서 스위치보드와 리퍼컨테이너의화재 발생 전과 후를 CCTV 및 열화상카메라, 추가센서류로 상시 모니터링하여, 화재 전 이상감지와 화재 후 불꽃, 연기 등의 화재 종류를 선내 알림하여 즉시 조치할 수 있도록 효율적인 화물관리시스템을 설계하고, 정확도 높은 화재 감지를 목적으로 데이터 학습을 위한 영상 및 전류 데이터 수집과 실제 컨테이너 스위치보드 및 리퍼컨테이너 레이아웃을 모사한 Testbed를 구축하였습니다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.3
• /
• pp.77-85
• /
• 2024

In this dissertation, a we designed and implemented a patrol robot that integrates a thermal imaging camera, speed dome camera, PTZ camera, radar, lidar sensor, and smartphone. This robot has the ability to monitor and respond efficiently even in complex environments, and is especially designed to demonstrate high performance even at night or in low visibility conditions. An orbital movement system was selected for the robot's mobility, and a smartphone-based control system was developed for real-time data processing and decision-making. The combination of various sensors allows the robot to comprehensively perceive the environment and quickly detect hazards. Thermal imaging cameras are used for night surveillance, speed domes and PTZ cameras are used for wide-area monitoring, and radar and LIDAR are used for obstacle detection and avoidance. The smartphone-based control system provides a user-friendly interface. The proposed robot system can be used in various fields such as security, surveillance, and disaster response. Future research should include improving the robot's autonomous patrol algorithm, developing a multi-robot collaboration system, and long-term testing in a real environment. This study is expected to contribute to the development of the field of intelligent surveillance robots.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.2
• /
• pp.40-48
• /
• 2012

Steel corrosion in concrete is a main cause of deterioration and early failure of concrete structures. A novel integration of electromagnetic heat induction and infrared (IR) thermography is proposed for nondestructive detection of steel corrosion in concrete, by taking advantage of the difference in thermal characteristics of corroded and non-corroded steel. This paper focuses on experimental investigation of the concept. An inductive heater is developed to remotely heat the embedded steel from concrete surface, which is integrated with an IR camera. Concrete samples with different cover depths are prepared. Each sample is embedded with a single rebar in the middle, resulting an identical cover depth from the front and the back surfaces, which enable heat induction from one surface and IR imaging from the other simultaneously. The impressed current (IC) method is adopted to induce accelerated corrosion on the rebar. IR video images are recorded during the entire heating and cooling periods. The test results demonstrate a clear difference in thermal characteristics between corroded and non-corroded samples. The corroded sample shows higher rates of heating and cooling than those of the non-corroded sample. This study demonstrates a potential for nondestructive detection of rebar corrosion in concrete.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.270-272
• /
• 2022

한의 복진은 복부를 검사하기 위해 수행되지만 정량화되지는 않았다. 이 연구의 목표는 소화불량의 주요 증상인 흉협고만이 있는 그룹과 아닌 그룹 사이에 유의하게 차이나는 복부 측정기기의 변수를 식별하는 것이다. 정량적인 진단을 위해 규칙에 따라 구획한 복부를 적외선 열화상 카메라, 디지털 압통기, 3D 카메라 및 디지털 청진기를 포함한 기기로 측정하였다. 연구방법으로 임상연구를 수행하여 한의사들이 진단한 복부 증상인 흉협고만과의 일치도를 조사하였다. 기기 측정 중 깊이, 압력, 깊이에 대한 압력의 비율은 흉협고만 그룹이 비 흉협고만 그룹보다 유의하게 작았다. 따라서 물리적 압통 특성이 감소하고, 복부 경직도가 감소하며, 민감도가 증가했다. 좌측과 우측 늑골 사이의 거리, 흉늑골 각도는 흉협고만 환자에서 유의하게 더 컸다. 또한, 깊이 차이, 표면 법선 벡터 및 깊이 값 사이의 각도 차이는 흉협고만 그룹에서 대부분 작았다. 복부 측정기기는 다양한 질환 및 증상에 사용될 것으로 기대한다.

• Journal of Internet of Things and Convergence
• /
• v.6 no.1
• /
• pp.23-30
• /
• 2020

This paper proposes energy management directions to discover the factors of energy loss in homes and buildings and to find ways to improve them. We designed a diagnostic content app for everyday life so that not only housing experts but also the general public can use the detachable thermal imaging camera, which is a strong point of popularity and convenience. The diagnostic results using the app were analyzed using Energy Finder, an energy efficiency diagnostic solution. The survey was conducted on the senior center which is in the blind spots and facilities of the energy welfare area. The target of diagnosis was energy efficiency diagnosis by selecting 30 senior centers for over 15 years from 600 locations located in Naju City, Jeollanam-do. The overall diagnosis was good, but it is considered that the place classified as 7th grade needs to be supplemented to improve energy efficiency.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.10
• /
• pp.1019-1023
• /
• 2012

In this research, a novel direct-aluminum-heating-induced crystallization method was developed for the purpose of application to solar cells. By applying a constant current of 3 A to an aluminum thin film, a 200-nm-thick amorphous silicon (a-Si) thin film with a size of $1cm{\times}1cm$ can be crystallized into a polycrystalline silicon (poly-Si) thin film within a few tens of seconds. The Raman spectrum analysis shows a peak of 520 $cm^{-1}$, which verifies the presence of poly-Si. After removing the aluminum layer, the poly-Si thin film was found to be porous. SIMS analysis showed that the porous poly-Si thin film was heavily p-doped with a doping concentration of $10^{21}cm^{-3}$. Thermal imaging shows that the crystallization from a-Si to poly-Si occurred at a temperature of around 820 K.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.4
• /
• pp.333-336
• /
• 2017

A speaker diaphragm generates a divided vibration. The influence of the break-up mode is sufficient to cause a shape change in the diaphragm. In this paper, is widely used in ultra-thin multi-media devices, including smart phones is the advance guard of the IT sector, the micro-speakers and its target. Micro-speakers are different from general speakers. The plate has structural form and space constraints. In particular, they utilize a closed-type drive space. It is difficult to provide cooling for the auxiliary suspension structure because of the heat generated in the moving coil. The present study considered the relationship between the break-up mode and the heat transfer of the diaphragm. An experiment was conducted in two stages to compare the embodiment of the break-up mode and heat transfer in a certain frequency range. The changes in the heat were determined through measurements and thermal imaging of the break-up mode. The break-up mode tendency of the diaphragm could be rapidly predicted based on the imaging results using the thermal imaging camera. This will help in the optimal design of micro-speakers.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.3
• /
• pp.547-554
• /
• 2022

Recently, the field of telemedicine is growing rapidly due to the COVID-19 pandemic. However, the cost of telemedicine services is relatively high, since cloud computing, video conferencing, and cyber security should be considered. Therefore, in this paper, we design and implement a cost-effective P2P-based telemedicine system. It is implemented using the widely used the open source computing platform, Raspberry Pi, and P2P network that frees users from security problems such as the privacy leakage by the central server and DDoS attacks resulting from the server/client architecture and enables trustworthy identifying connection system using SSL protocol. Also it enables users to check the other party's status including body temperature in real time by installing a thermal imaging camera using Raspberry Pi. This allows several medical diagnoses that requires visual aids. The proposed telemedicine system will popularize telemedicine service and meet the ever-increasing demand for telemedicine.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.4
• /
• pp.443-446
• /
• 2013

An infrared thermography technique can be used to inspect a large area simultaneously and to detect defects such as cracks or delaminations in real time. Infrared thermography is a technique in which visual images are formed from the infrared range from subjects according to their thermal radiation. The molecules of all objects are disturbed by heat, and the molecular motion becomes more active when the temperature rises and less active when the temperature falls. In this study, the applicability and feasibility of ultrasound thermography for detecting defects in an engine block, which is a key component in the automobile industry, were verified. A nondestructive reliability test was conducted to study the defects, after which the results were analyzed.