• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.3
• /
• pp.589-596
• /
• 2018

Transportation or structure has the important role at clothing, food, and housing at modern society. If even the small crack happens and propagates at transportation or structure, the parts are fractured and they can cause a disaster. CT specimen was used in order to investigate the damage trend due to the crack propagation at this study to prevent this situation. As the material of CT specimen, the unidirectional carbon fiber reinforced plastic of the composite material in the limelight nowadays. The laminate angle designated in order of [60/-60/60/-60] was applied to the specimen model with the unidirectional fiber. As the analysis condition, the forced displacement was applied to the hole of upper part after fixing the hole of lower part. At the result of this study, the equivalent stress and shear stress was shown to be higher in order of the structural steel, copper, titanium and aluminum. This study result is thought to be utilized usefully at verifying the damage of CT specimen made of inhomogeneous material.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.48-48
• /
• 2023

지역의 역사성을 지니고 발전한 전통색은 지역 문화와 자연환경에 영향을 받는다. 전통색은 일반적으로 관용색명으로 표현하는데, 이는 세계인의 공용어가 아니므로 우리의 천연염색을 국내외 일반인과 공유하기 위해서는 표준화된 색명(KS-계열색, RGB, CMYK)을 사용하는 것이 필요하다. 우리나라에서 염료재로 활용된 염료식물은 393종으로 알려져 있다. 본 연구에서는 염료식물의 자원 활용과 그 보전적 가치를 알리고자 염료식물을 언급한 고문서 및 현대자료를 바탕으로 사용 부위, 매염제의 종류, 염색 시 발현 색상의 관용색명을 조사하였고, 이를 국가표준색상환에 대입하여 표준화에 대한 방향성을 제시하고자 한다. 연구 결과에 따르면, 염료식물 393종 중 관용색명을 가진 염료식물은 312종이었고, 관용색명의 정보가 없는 식물은 81종으로 나타났다. 염료식물의 사용 부위 정보를 가진 식물은 187종이었고, 이용부위는 식물체 전체(전초), 뿌리, 줄기(껍질), 줄기(심재), 나뭇가지, 잎, 열매(껍질), 꽃이었다. 염료식물에 활용되는 매염재는 15가지(천연 6종, 화학 9종)로 나타났다. 관용색명을 가진 염료식물 312종에서 조사된 540개 관용색명을 표준화 시키기 위하여 국가표준색상환에 대입한 결과, 표준화된 색명(KS계통색명, RGB, CMYK)을 갖는 식물은 127종, 관용색명은 있지만 표준화된 색명을 확인할 수 없는 식물은 185종인 것으로 나타났다. 향후 염료식물을 연구하는데 있어서 관용색명의 정보가 없는 염료식물에 대한 표준화된 색명을 찾아내는 연구가 이루어져야 할 것이다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.43-44
• /
• 2023

Fire doors installed to prevent the spread of fire in buildings are made of paper honeycomb, glass wool, and other materials. Due to their high water absorption rate, they absorb ambient moisture and degrade, and their increased weight causes them to sag internally, creating voids that can warp in the event of a fire and allow flames to pass through. To overcome these issues, research is being conducted on the physical performance of lightweight aerated concrete. However, there is a lack of research on how to ensure fire resistance. Therefore, in this study, the backside temperature of lightweight aerated concrete formulations was measured and compared and analyzied with the physical performance. Since it is difficult to achieve low density by saturation alone, aerated concrete with EPS was produced, which resulted in a density reduction of 24'26%, but the strength increase per unit cement increase was 5'25%, which tended to be lower than the formulation without EPS. The results showed that the lightweight aerated concrete with EPS was 130~140℃ lower than the lightweight aerated concrete with EPS, which is believed to be due to the melting point of EPS delayed the heat diffusion. In the future, wo plan to conduct research to identify the optimal formulation for fire door core materials by varying the amount of EPS added and using industrial by-products to increase long-term strength.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.23-32
• /
• 2008

Anatomical and physical characteristics of seven cultivars of chestnut wood (Castanea crenata Sieb. et Zucc.), Tanzawa, Ibuki, Mansung, Arima, Ginyose, Tsukuba, and Riheiguri, were investigated to obtain some valuable information for their possibilities to be used for high quality furnitures and woodcrafts. Solitary pore and figured-porous or ring-porous wood types were observed in wide growth rings, and ring-porous in narrow growth rings. Procumbent type was prevalent in ray cells although upright and square types were scarcely existed. Uniseriate, biseriate, and multiseriate rays were observed in tangential section. Uniseriate ray was abundant near the pith, and biseriate and multiseriate rays were frequently existed near the bark. The occurrence rate of biseriate and multiseriate rays was significantly high in Tanzawa, Ibuki, Mansung and Tsukuba, but was somewhat low in Arima, Ginyose and Riheiguri. The inner region showed larger vessel diameter, more vessel number, fewer ray number and higher ray height than the outer region. Growth-ring width in inner region was larger than that in outer region. Growth-rings in inner region of Mansung and Arima were wide while that of Ibuki was narrow. Outer region in all cultivars showed higher latewood percentage than inner region. Especially, Mansung and Tsukuba showed significantly high latewood percentage in their outer region. Green moisture content and density of heartwood were higher than those of sapwood. Tsukuba and Riheiguri had higher green moisture content, and Ibuki and Riheiguri had higher green density than the other chestnut cultivars.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.3
• /
• pp.8-19
• /
• 1989

The proportion of imported wood has been now over 80% of raw materials needed in the wood industry, and therefore, many of studies on the substitution of domestic wood for imported wood and on the increasing the utilization rate of domestic species have been attempted and considered as very important projects to solve. But these trials were practically restricted by several disadvantages of domestic species. such as a small diameter, variety of species, and irregularity of wood physical or chemical characteristics, etc. From a this point of view, this study was carried out to investigate solid wood bending properties of sample trees and then to develop their end uses. The species of sample trees were Pinus densiflora S. et Z., Pinus rigida Mill., and Larix leptolepis Gord. which have large growing stocks but Pinus rigida and Larix leptolepis have not been used well because of their poor qualities. The results obtained were as follows: 1. The optimum conditions for solid wood bending processing of Pinus densiflora, Pinus rigida, and Larix leptolepis are showed in Table 6. 2. The minimum solid-bending radii of Pinus densifjora, Pinus rigida, and Larix ieptolepls were 260mm, 240mm, and 300mm, respectively in steaming treatment.

• Journal of Bio-Environment Control
• /
• v.19 no.1
• /
• pp.31-35
• /
• 2010

In this experiment, the effects on the growth and the quality of cut flowers of chrysanthemum 'Jinba' were mainly concerned depending on cultural methods between the pinching and the non-pinching. According to the results, the sufficient period of the vegetative growth was necessary to enter the flower bud differentiation in case of the non-pinching cultivation whereas it was not the case on the pinching. As compared with the pinching, the non-pinching showed 10% higher in the flowering ratio after flower bud differentiation. The flowering ratio of the non-pinching exceeded more than 95% but the pinching showed below 95% of the flowering ratio after flower bud differentiation. Comparing the number of cutting flowers between pinching and non-pinching, it was the non-pinching that showed the production of the first grade cutting flowers about 5 weeks faster than that of the pinching. It seem to be possible that harvesting time and growing period could be shortened. In the non-pinching growing region, above third-grading marketable cut flowers was 100% regardless of planting time. On the contrary, the pinching method showed 84.7% of marketable cutting flowers at first week from the planting, followed by 64.3% at second week, 18.8% at third week, and 2.6% at fourth week. Marketability of cutting flowers indicates that were planted by the pinching is very poor. When draw a comparison between the fourth-week planting of the non-pinching with the first-week planting of the pinching, the non-pinching could cut the growing period 38 days shorter than the pinching and the marketability was better. These results indicate that the non-pinching method can shorten the growing period and harvesting time compared to the pinching and it also resulted in reduction of cost and rapid production of the cutting flowers.

• Journal of Korean Society of Forest Science
• /
• v.89 no.1
• /
• pp.77-84
• /
• 2000

In order to understand the chemical binding forms of Cd in terms of its binding strength in wood, the radial distribution of it through dendroanalysis and its different chemical fractions in trunk wood of mature red pine(Pinus densiflora L.) trees grown in a relatively unpolluted area, in Kangwon-Province, were examined. Total Cd concentration in stem wood was determined by dry digestion and $H_2O$ and 0.01 M solutions of citric acid, malic acid, $CaCl_2$, $MgCl_2$, $Na_2EDTA$ were used as extracting solutions for Cd. Extracting efficiencies of applied solutions were expressed as % of Cd concentration extracted by $Na_2EDTA$ which extracted all Cd instead of Cd total concentration. Total concentration of Cd decreased from the innermost rings near pith towards the the outermost rings near cambium. Especially through the transition zone this tendency was observed clearly. $H_2O$ was the least effective extractant of Cd, then extracting efficiency increased in the order $MgCl_2$ < $CaCl_2$ $Na_2EDTA$ (extracted all Cd). According to the radial position, extracting efficiency of Cd was ranging from 7 to 30% by $H_2O$ and even from 60 to 95% by citric acid. The Cd extracting efficiencies of $H_2O$ and organic acids increased continuously from the stem center to outermost annual rings, whereas salts showed somewhat different tendency, suddenly decreasing near the outermost ring. The results are discussed with regard to the different chemical binding forms of Cd and the mobility of Cd in wood and comparable with ones in previous studies on Pinus sylvestris and Quercus patraea. According to the results, usefulness of radial distribution pattern of Cd in pine tree trunks for retrosective biomonitoring is questioned.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.4
• /
• pp.301-307
• /
• 2014

In order to reduce the emission of carbon dioxide($CO_2$), this research use blast furnace slag in concrete manufacture, as 100% replacement of cement. The aim of this study is to investigate the density and strength properties of alkali-activated lightweight composites with alkali activators of different types and different amounts. The bubble for achieving the lightweight of alkali-activated lightweight composites was generated in the reaction between the paper ash and the alkali activators instead of using a foaming agent. Lightweight formed concrete was conducted basic experimental for determining replacement ratio of paper ash. Then, the density and strength were measured according to the types and the contents of the alkali accelerator that can react with the paper ash. As results, the optimum replacement ratio of the paper ash was 5%. The alkali activator containing NaOH 12.5% obtained the lowest weight of $1.13g/cm^3$. Also, compressive strength were relatively high. Therefore, this study demonstrated that alkali accelerator with a certain amount of NaOH can achieve relatively high strength and lightweight alkali-activated lightweight composites.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.4
• /
• pp.195-203
• /
• 2006

An antagonistic strain, Burkholderia MP-1, showed antimicrobial activity against various filamentous plant pathogenic fungi, yeasts and food borne bacteria (Gram-positive and Gram-negative). The nucleotide sequence of the 16S rRNA gene (1491 pb) of strain MP-1 exhibited close similarity (99-100%) with other Burkholderia 16S rRNA genes. Isolation of the antibiotic substances from culture broth was fractionated by ethyl acetate (EtOAc) solvent and EtOAc-soluble acidic fraction. The antibiotic substances were purified through a silica gel, Sephadex LH-20, ODS column chromatography, and high performance liquid chromatography, respectively. Four active substances were identified as phenylacetic acid, hydrocinnamic acid, 4-hydroxyphenylacetic acid and 4-hydroxyphenylacetate methyl ester by gas chromatographic-mass spectrum analysis. The minimum inhibition of concentration (MIC) of each active compound inhibited the growth of the microorganisms tested at 250 to $2500{\mu}g\;ml^{-1}$. The antimicrobial activity of crude acidic fraction at 1 mg of dry weight per 6 mm paper disc was more effective than authentic standard mixture (four active substances were mixed with the same ratio as acidic fraction) over a wide range of bacterial test.

• Food Science and Preservation
• /
• v.20 no.6
• /
• pp.810-817
• /
• 2013

This study investigated the properties of rice snack puffed in a microwave oven after drying its dough according to Baekjinju soaking time and additional soybean milk. The optimum conditions for the non-fried rice snack using Baekjinju wetted flour were determined through the design of an experiment using response surface methodology. The independent variables were the Baekjinju soaking time and the additional soybean milk, and the dependent variables were the weight, volume, density, expansibility, Hunter's color value, hardness, and sensory properties. The quadratic model was chosen for the weight, density, expansibility, b value, and hardness. The two-factor interaction model was chosen for the volume, flavor, appearance, and overall preference. The linear model was chosen for the L value, taste, and texture. The weight was increased to longer than 11.26 days with the increase in the rice soaking. The volume, expansibility, L value, and b value increased with the increase in the rice soaking time and in the additional soybean milk ratio. However, the density was decreased was in reverse. The hardness increased most, with the rice soaking time rising from 5.28 to 8.53 days and the soybean milk additional ratio increasing from 5.34 to 20.26%. The sensory properties improved as rice soaking time decreased, and the soybean milk additional ratio was revered. As for the desirability, the optimal formulation of the dough of non-fried rice snack was achieved by mixing 200 g of Baekjinju flour with a 0.69 days rice soaking time and a 26.67% soybean milk of rice ratio according to weight.