• Journal of Platform Technology
• /
• v.9 no.1
• /
• pp.32-39
• /
• 2021

Existing environmental measuring devices mainly focus on electromagnetic wave and eco-friendly product certification and durability test, and sensor reliability verification and verification of measurement data are conducted mainly through sensor performance evaluation through type approval and registration, acceptance test, initial calibration, and periodic test. This platform has established an ICT-based environmental monitoring sensor reliability verification system that supports not only performance evaluation for each target sensor, but also a verification system for sensor data reliability. A sensor board to collect sensor data for environmental information was produced, and a sensor and data reliability evaluation and verification service system was standardized. In addition, to evaluate and verify the reliability of sensor data based on ICT, a sensor data platform monitoring prototype using LoRa communication was produced, and the test was conducted in smart cities. To analyze the data received through the system, an optimization algorithm was developed using machine learning. Through this, a sensor big data analysis system is established for reliability verification, and the foundation for an integrated evaluation and verification system is provide.

• New & Renewable Energy
• /
• v.19 no.4
• /
• pp.72-83
• /
• 2023

Only ground source heat pump units certified according to the regulations in Korea can be adopted in ground source heat pump systems. In this study, domestic and international standards and regulations for ground source heat pump units were investigated. Unlike ISO 13256-1~2, which is the international standard, KS B 8292~8294 for ground source heat pump unit only included rated test conditions. Therefore, it is necessary to supplement various test conditions to the KS B series, because its performance data, which is required to calculate the system's design capacity, is dependent on the change in entering water temperature. The difference between the coefficient of performance of the certified ground source heat pump units and the certified criteria changed significantly according to the operating mode, heat source, and load type, because the criteria increased by about 5% for all. Thus, it is highly suggested that the certification standards be revised while considering the product performance level and various conditions.

• Korea Trade Review
• /
• v.42 no.2
• /
• pp.319-344
• /
• 2017

The international standard certification evaluates the extend to which the supplier satisfies the international standard certification standards of the supplier of the product and the service, recognizes the quality assurance ability and reliability of the supplier, thereby resolving the international trade regulation that can occur to various fields and strengthening the network of the global partnership it is making an important contribution. Therefor, in this study, the survey was conducted on 153 companies of Korean import and export companies. The research method was empirically analyzed by the structural equation model. The results of the hypothesis test of this study are as follows. First, resource management factors among the international standard certification factors in the global trade supply chain integration had a positive effects on CRM satisfaction. Second, the measurement, analysis and improvement factors of international standard certification factors had a positive effects on CRM satisfaction. Third, CRM satisfaction has a positive effects on business performance. Through this study, it is concluded that the Korean import and export companies have an important role in improving the business performance of the global trade partners.

• The Magazine of the IEIE
• /
• v.21 no.11
• /
• pp.75-85
• /
• 1994

Safety and Reliability assessments of Avionics Parts must be conducted essentially in the step of disign and manufacture as it constitutes a major field of aircraft critical operation. Recently Avionics parts fabrication techniques are continuously developing by applying digital techniques. Airborne computer is being adopted on an aircraft for flight is being adopted on an aircraft for flight safety augmentation and simplification of controls including reduction of human error. Therefore inspection and evaluation procedures should be developed in order to accomodate such trends. The number of avionics parts is approximitely 72% of total TSO parts, so it is expected high added-values through manufactures of TSO parts in aircraft industries. Particuarly avionics parts must be manufacturered with our own technology to be used in Mid-class aircraft which will be developed soon. Along with this, preparation of Certification Procedures is essential for Avionics Parts.

• Journal of Korea Port Economic Association
• /
• v.31 no.1
• /
• pp.111-125
• /
• 2015

This study aims at analyzing the influences of Certification of Green Logistics Company on performance and suggesting the implications. Based on previous studies which were related to certificate system of green logistics company and logistics performance, this study established research model and hypothesis, and surveyed the employees who worked in the field of logistics. To analyze the data, factor analysis, reliability analysis, confirmatory factor analysis and structural equation model were applied. The results are as follows. The object management of green logistics gives significantly positive effect to logistics performance and environment performance. The measurement of logistics energy and green gas give meaningful positive effect to logistics performance, environment performance and resource performance. The conversion of green logistics does not give significantly positive effect to any performances. And the effect management of green logistics has significant influence on firm performance.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.8
• /
• pp.249-258
• /
• 2022

Since the advent of Bitcoin, various virtual assets have been actively traded through virtual asset services of virtual asset exchanges. Recently, security accidents have frequently occurred in virtual asset exchanges, so the government is obligated to obtain information security management system (ISMS) certification to strengthen information protection of virtual asset exchanges, and 56 additional specialized items have been established. In this paper, we compared the domain importance of ISMS and CryptoCurrency Security Standard (CCSS) which is a set of requirements for all information systems that make use of cryptocurrencies, and analyzed the results after mapping them to gain insight into the characteristics of each certification system. Improvements for 4 items of High Level were derived by classifying the priorities for improvement items into 3 stages: High, Medium, and Low. These results can provide priority for virtual asset and information system security, support method and systematic decision-making on improvement of certified items, and contribute to vitalization of virtual asset transactions by enhancing the reliability and safety of virtual asset services.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9C
• /
• pp.908-922
• /
• 2003

The Public Key Infrastructure (PKI) trends to delegate the certificate path processing to the Delegated Path Discovery (DPD) Server and Delegated Path Validation (DPV) server recently. The most critical factor for the selection of the delegated server is to allow the server to be equipped with a high reliability through a low cost, and simple implementation. In this paper, we propose a new certificate path processing scheme employed the trusted CA as the DPD/DPV server by adding the capability of the Validation Authority (VA) to the trusted CA. Since our proposed scheme uses the existing trusted CA as validation server, we can achieve a high trust through a simple implementation for the processing. Besides, we propose an additional scheme for reducing an overhead on the trusted CA. it is obtained by delegating digital signature verification to CAs on the path and by skipping the repeated path processing. As the result, our proposed validation scheme can be performed efficiently with high speed and low computational overhead.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.688-698
• /
• 2018

The government has recognized the importance of smart city indicators and prepared the legal grounds for the certification of smart cities in the recently revised "Act on Smart City Development and Industrial Promotion." This study derived smart city indicators adequate for the domestic conditions and compatible with the overseas trends by examining and complementing the indicators through an AHP analysis based on consultations and interviews (surveys) with experts and local government officials, who are actually carrying out related projects. In addition, the adequacy and reliability of the indicators were confirmed by verifying and certifying the Korean local governments' smart city plans through demand surveys on a trial basis. This study is meaningful in that it systematically studies the smart city indicators that have gained in importance and reviews their application. The findings of this study can be used as a basis for implementing a smart cities certification system in the future. Recently, the Special Committee on Smart Cities was established under the Committee for the Fourth Industrial Revolution. This committee is composed of civilian members and is working with the Ministry of Land, Infrastructure, and Transport, the Ministry of Science and ICT, etc., to promote the creation of smart cities. It is expected that smart city indicators that include the levels of both domestic and overseas smart cities will boost the active spread of such cities in Korea.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.6
• /
• pp.139-150
• /
• 2019

IoT(Internet of Things) security is becoming increasingly important because IoT potentially has a variety of security threats, including limited hardware specifications and physical attacks. This paper is a study on the certification technology suitable for the lightened IoT environment, and we propose a system in which many gateways share authentication information and issue authentication tokens for mutual authentication using blockchain. The IoT node can be issued an authentication token from one gateway to continuously perform authentication with a gateway in the block-chain network using an existing issued token without performing re-authentication from another gateway participating in the block-chain network. Since we do not perform re-authentication for other devices in a blockchain network with only one authentication, we proposed multi phase authentication consisting of device authentication and message authentication in order to enhance the authentication function. By sharing the authentication information on the blockchain network, it is possible to guarantee the integrity and reliability of the authentication token.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.64-75
• /
• 2022

The ITS performance evaluation has been performed in the evaluation of traffic data collection equipment. However, evaluation of the data collection equipment alone cannot guarantee the reliability of the traffic information. So, ITS service evaluation has to be implemented institutionally. In this study, an evaluation method has been prepared to evaluate the accuracy of travel time information in road sections. In addition, a piece of portable reference equipment was developed to collect travel time data on the road. Field tests were performed on two national road sections managed by the Seoul Construction and Management Administration (SCMA) to prepare an evaluation method considering field conditions and evaluate the reference equipment's performance. Based on the test results, the improvement of the reference equipment to collect more samples and the adjustment of collection points were discussed.