• Cement
• /
• s.59
• /
• pp.26-38
• /
• 1975

본고는 일본 소야전Cement Co.의 중앙연구소주임연구원으로 있는 Hiroshi Uckikawa 박사가 일본의 Ceramics-Japan지(''74.10)에 기고한 것을 번역한 것으로서 그 내용에 의한 목차는 다음과 같다. 즉 근년에 개발된 새로운 cement로서는 1. 속경성 cement 2) 초속경 cement(jet cement, regulated set cement) 2) Alumina cement 3) 초조강 cement 4) 급경 cement 2. 고강도 cement 3. 내구성 cement 1) 내유산균 cement 2) 내화 cement (1) alumina cement 계 (2) barium, strontium 계 cement (3) 인산 aluminium 계 cement 3) 방사선차폐용 cement 4. 팽창 cement 1) alumine 산, 유산 calcium 수화물의 생성에 의한 것 2) 수산화 calcium의 생성에 의한 것 3) 기타 5. 시공성을 개선한 cement (예: 유정용 cement, 도장용 cement) 등이 있다. 머지 않아 우리나라에서도 cement 품종의 다양화가 필연적인 문제로 대두될 것을 생각하여 본번역문이 다소나마 도움이 되기를 바란다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1206-1211
• /
• 2010

Soil-cement, a hardened mixture of Portland cement, soil, and water that contain sufficient durability, has been widely utilised in Seoul urban construction sites to retain lateral earth pressures or reinforce grounds. However, little information has been reported about the strength characteristics of soil-cement constructed in Seoul urban area. In this study, we performed a number of unconfined test to the soil-cements mixed from soils sampled in 3 sites in Seoul urban area. Results indicate that unconfined strengths and optimum cement amounts of soil-cements are highly dependent on the proportion of coarse-grain particles of mixed soils. Furthermore, changes of unconfined strengths with curing time are diverse with respect to mixing conditions.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.957-962
• /
• 2010

Foundation systems in urban sites are often necessary to be constructed with little vibrations and displacements to surroundings. In order to assess applicability of a new foundation system for urban sites based on soil-cement mixing technique, vibrations and displacements induced by soil-cement construction process is evaluated. Soil-cement columns were constructed to reinforce soft ground near an old masonry wall in an urban redevelopment site, and the vibrations and displacements of the old masonry wall during construction were measured. Results indicate that the vibrations and displacements induced by soil-cement construction were little and not critical to the stability of the masonry wall.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.4
• /
• pp.637-645
• /
• 2017

Jeju Island is composed of irregular volcanic rock layers formed by several volcanic activities. Since structure such as the offshore wind turbine has to support considerably large over turning moment due to long distance from foundation to load point and relatively large horizontal load. Pile foundations are needed to economically support such structure even in the case of rock layer. Therefore, in this study, mechanical performances are estimated by mixing ratio of water, cement, and sand to figure out optimal mixing ration of filling material for pile penetrated to rocky layers, and outcomes of this study are compared and analyzed with results of other researches. In the same conditions, mechanical performances of the mortar (S/(S+C)=20~40%) are better than those of cement paste and soil cement. On the basis of major outcome of this study, appropriate range of mixing and a strengthening model are suggested.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.72-81
• /
• 2024

In this study, DEIPA was used for enhancing cementitious performance of bottom ash replaced cement. By applying the partial or no-known crystal structure method to X-ray diffraction data, the amounts of amorphous bottom ash and calcium silicate hydrate(C-S-H) could be separated and quantified. In the sample without DEIPA, the bottom ash hardly reacted, resulting in low compressive strength. However, the addition of DEIPA not only altered the hydration behavior of the cement but also enhanced the pozzolanic reaction between bottom ash and calcium hydroxide, leading to the generation of additional C-S-H. This resulted in high compressive strength not only in the early stages but also in the later stages. Therefore, with the addition of DEIPA during the pulverization of the bottom ash, the reactivity of the bottom ash was significantly improved. Hence, there is potential in the development of bottom ash replacement cement.

• Resources Recycling
• /
• v.29 no.5
• /
• pp.64-72
• /
• 2020

When the multi-stage combustion process is applied to the cement kiln to reduce nitrogen oxide emissions in the cement industry, oxidation/reduction section that can increase combustion efficiency by reducing NO_x to NO and completely burning unburned materials is essential In this study, when applied the oxidation/reduction system of the cement kiln preheater and calciner, the optimal oxidation/reduction calcination crisis that can secure the quality stability of the final product, cement clinker, was to be observed macroscopically, and the mass change of raw materials according to the burning conditions, decarbonation rate, and calcination rate were investigated. The results showed that the thermal decomposition of raw materials tends to be promoted in the oxidation condition rather than in the reduction condition, and that the thermal decomposition of limestone, which has a relatively high CaO content, is carried out later than that of cement raw meal, which is thought to be caused by the CO₂ fractionation in the kiln. The thermal decomposition properties of raw materials according to oxidation/reducing burning condition showed a relatively large difference in temperature range lower than normal limestone themal decomposition temperature, which is thought to be expected to improve the thermal efficiency of raw materials according to the formation of oxidation condition in the section 750℃ of burning temperature. However, for this study, lab scale. Because there is a difference from the field process as a scale study, it is deemed necessary to verify the actual test results of the pilot scale.

• Resources Recycling
• /
• v.25 no.3
• /
• pp.63-73
• /
• 2016

With the purpose of concentrating the magnesium from seawater, in this study, we have conducted experiments to precipitate the magnesium using three precipitants (NaOH, cement kiln dust, and paper sludge ash), and then extract it using sulfuric acid. Results show that the precipitation and extraction performance does not depend so significantly on the kind of precipitant: for all the precipitants used, the precipitation efficiency is measured almost 100% and the extraction efficiency is in the short range of 77 - 89%. The magnesium concentration in the extract is measured 4975 - 5775 mg/L, implying that the magnesium in seawater should be 3.8 - 4.4 times concentrated through the precipitation and extraction reactions. The reaction efficiency of the industrial by-product used as a precipitant in this study is almost 100% similar to those of the other existing expensive precipitants.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.2
• /
• pp.185-190
• /
• 2021

Cement has been used as a main material in the modern construction industry. However, it has been pointed out as a main cause of global warming due to carbon dioxide generated during manufactured. Recently, research that replacing cement substitute to industrial by-products such as Blast Furnace Slag which is by-producted in steelworks. When Blast Furnace Slag is used as a cement substitute, it shows a problem of lower initial strength, which is caused by glassy membrane on the particle surface. In this study, we used Electrolysis Alkaline Aqueous to improve the usability and problem of lower initial strength. As a result of the experiment, cement matrix using Blast Furnace Slag and Alkaline Aqueous showed initial strength and hydrate product were developed than that using general mixing water. Also, as a result of porosity analysis, It was confirmed that cement matrix using Alkaline Aqueous and Blast Furnace Slag has a tighter structure in internal porosity and porosity distribution than using general mixing water.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.117-124
• /
• 1988

From the test results of the adsorption characteristics of AE admixture, it was shown that the adsorption of AE admixture on fly ash was mearly completed in 30 minutes and the higher was ignition loss, the larger the quantity of saturation adsorption. Because most of the ignition loss of the fly ash was due to the unburned carbon, it could be said that the unburned carbon is the main reason of reduction of air content in AE concrete. On the other hand, in the case of superplasticizer, the amount of saturation adsorption in fly ash was lower than in cement and the same result was obtained in the dispersive effect. But, when using superplasticizer in fly ash substituting concrete, the fludity in the concrete was not decreased.

• Tunnel and Underground Space
• /
• v.32 no.3
• /
• pp.194-202
• /
• 2022

An increased number of cases have occurred in applying ICT technology in the resource development field due to factors such as safety, eco-friendliness, and low cost since the 2000s. In Korea, the 2nd mining master plan specified the significance of converging the full cycle of mining and ICT, while the 3rd mining master plan highlighted ICT and smart mining such as supporting the supply of an ICT mining device and introducing demonstrational smart mining. This study introduces the application of an ICT device and safety system operation in the Jangseong underground mine of Korea Cement Co., Ltd. Currently, Jangseong mine combines two different kinds of 3D equipment including the handheld 3D scanner and multi-station that provides both the measurement and 3D scanning to perform a 3D measurement of the mine. Taken from the 3D measurement of the mine, it is now possible to identify any hazardous areas and abnormalities in different directions and analyze the safety of the crown pillar between two stopes in different level. Besides, the real-time location tracking and communications system have established highly efficient rescue and evacuation plans to effectively deal with any accidents in the mine.