Browse > Article
http://dx.doi.org/10.12652/Ksce.2017.37.4.0637

Mechanical Properties of Filling Materials for Bored Pile in Rock  

Moon, Kyoungtae (Jeju National University)
Park, Sangyeol (Jeju National University)
Shin, Mingun (Jeju National University)
Publication Information
KSCE Journal of Civil and Environmental Engineering Research / v.37, no.4, 2017 , pp. 637-645 More about this Journal
Abstract
Jeju Island is composed of irregular volcanic rock layers formed by several volcanic activities. Since structure such as the offshore wind turbine has to support considerably large over turning moment due to long distance from foundation to load point and relatively large horizontal load. Pile foundations are needed to economically support such structure even in the case of rock layer. Therefore, in this study, mechanical performances are estimated by mixing ratio of water, cement, and sand to figure out optimal mixing ration of filling material for pile penetrated to rocky layers, and outcomes of this study are compared and analyzed with results of other researches. In the same conditions, mechanical performances of the mortar (S/(S+C)=20~40%) are better than those of cement paste and soil cement. On the basis of major outcome of this study, appropriate range of mixing and a strengthening model are suggested.
Keywords
Bored pile; Filling material; Mix proportion; Compressive strength; Cement paste; Mortar;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Eon, N., Yun, S., Park, W., Yun, H. and Kim, D. (2013). "The compressive strength characteristics of cement paste containing blast furnace slag with elapsed curing time." Proc. of 2013 Korea Concrete Istitute conference, KCI, Gangwon, Korea, pp. 227-228 (in Korean).
2 Do, J., Nam, M, Shim, J., Park, Y. and Lee, S. (2015). "Engineering characteristics of cement milk for bored piles." Jour. of the Korean Geotechnical Society, KGS, Vol. 31, No. 12, pp. 29-43 (in Korean).   DOI
3 Haach, V. G., Vasconcelos, G. and Lourenço, P. B. (2011). "Influence of aggreagates grading and water/cement ratio in workability and hardened properties of mortars." Construction and Building Materials, Vol. 25, No. 6, pp. 2980-2987.   DOI
4 Hong, W., Lee, J. and Chai, S. (2008). "Bearing capacity of SDA augered piles in various grounds depending on water-cement ratio of cement milk." Jour. of the Korean Geotechnical Society, KGS, Vol. 24, No. 5, pp. 37-54 (in Korean).
5 Korean Geotechnical Society. (2015). Code requirements for structural foundation design, pp. 364-369 (in Korean).
6 Mun, T., Kang, C. and Lee, H. (2009). " Characteristics of physical properties according to compound condition of grout mortar." Jour. of Korean Society of Explosives & Blasting Engineering, KSEE, Vol. 27, No. 1, pp. 32-37 (in Korean).
7 Park, J. (2004). "Strength and friction behavior of cement paste poured in the bored pile." Jour. of the Korean Geo-Environmental Society, KGES, Vol. 5, No. 3, pp. 31-39 (in Korean).
8 Park, S., Kwon, S. and Kim, T. (2009). "An experimental study on the durability characterization using porosity." Jour. of the Korean Society of Civil Engineers, KSCE, Vol. 29, No. 2, pp. 171-179 (in Korean).
9 Singh, S.B., Munjal, P. and Thammishetti, N. (2015). "Role of water/cement ratio on strength development of cement mortar." Jour. of Building Engineering, Vol. 4, pp. 94-100.   DOI
10 Yoon, S.H. and Ko, K.W. (2011). Topography, geology, and underground water in Jeju Island, Nae Ha Publishing Company