• Polymer(Korea)
• /
• v.36 no.5
• /
• pp.586-592
• /
• 2012

Iron oxides ($Fe_3O_4$) are metabolically secreted after endocytosed by cells, indicating no cytotoxicity. Therefore, they are widely used as a contrast agent before photographing of magnetic resonance imaging. In this study, iron oxide nanoparticles are synthesized by the co-precipitation method and subsequently immobilized with a homing peptide (AP), which specifically interacts with interleukin-4 receptor located on the membrane of endothelial and bladder cancer cells. The size of AP-immobilized iron oxide particle is about 39 nm. Intracellular uptake of the AP-immobilized iron oxide nanoparticles was investigated using bladder cancer cells and fibroblasts as the control. As the result, the nanoparticles are specificially uptaken by bladder cancer cells. However, the nanoparticles are not specificially uptaken by fibroblast. It could be said that the AP-immobilized iron oxide nanoparticles have a potential to be used as a contrast agent for early diagnosis of cancer.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.12a
• /
• pp.17-26
• /
• 2004

산화철의 국제동향에 대하여 각 지역 간의 수출입동향과 최근에 급속하게 성장하고 있는 중국의 산화철업계 동향에 대하여 소개하였다. 특히 세게 산화철 교역량은 산화철업계의 기술발전과 각 국이 처한 환경에 따라 변화하며, 산화철의 주요용도중 하나인 안료용도의 경우 건축경기에 큰 영향을 받는다. 중국의 산화철업계는 전반적으로 크게 성장한 반면 다국적 기업의 진출에 따른 기술력 향상과 반대급부로 경쟁력 약한 중국내 기업정리 등이 수반되었다. 산화철산업의 발전을 위하여는 타 소재와의 가격경쟁력도 중요하지만 새로운 응용분야의 개척이 필요하다 본 기술자료에서는 최근에 관심이 집중되는 산화철 나노분말에 대하여 신용도 및 특성에 대하여 소개하였다.

• Clean Technology
• /
• v.28 no.2
• /
• pp.110-116
• /
• 2022

In this study, iron oxide (FeO_x) nanoparticles were synthesized using iron (Fe) by-products recovered from NdFeB permanent magnet scraps, and the effect of heat-treatment temperature on the physical properties of the FeO_x nanoparticles was investigated. In order to prepare the FeO_x nanoparticles, 2.0 M ammonia (NH₄OH) solution was added to an iron by-product solution diluted to c.a. 10 wt% in D.I. water, which led to the precipitation of the iron oxide precursor. Then, the FeO_x nanoparticles were synthesized by heat-treatment at 300 ℃, 400 ℃, 500 ℃ and 600 ℃. After that, the physical properties of the FeO_x nanoparticles were investigated in order to understand the effect of the heat-treatment temperature. The results of the X-ray diffraction (XRD) analysis showed that the diffraction peak in accordance with the <104> direction increased as the heat-treatment increased, and a diffraction peak indicating the α-Fe₂O₃ crystal structure was detected at heat-treatment temperatures above 500 ℃. The BET specific surface area analysis revealed that the specific surface area decreased as the heat-treatment temperature increased to above 400 ℃. Observation with a high resolution transmission electron microscope (HRTEM) showed that rod-shaped nanoparticles were formed, and the size of the nanoparticles showed a tendency to increase as the heat-treatment temperature increased.

• Resources Recycling
• /
• v.13 no.6
• /
• pp.3-8
• /
• 2004

From the world wide globalization of iron oxide industry, the global trend in iron oxide is changed rapidly and the production of iron oxide is increasing in China, currently. Iron oxide have a broad range of applications from construction materials to medical area. Therefore, it is expected that nanoparticulate iron oxides have many applications, too. A series of interesting applications in entirely different fields are introduced.

• Korean Journal of Materials Research
• /
• v.6 no.8
• /
• pp.768-778
• /
• 1996

Iron oxide (hematite, $\alpha$-${Fe}_{2}{O}_{3}$) particles were prepared directly from aqueous solution using a crystal growth controller. Paticles properties and reaction mechanisum of products as a function of basicity, formation process and mechanism of needle-lkie hematite were investigated. hexagonal hermatite particles were formed in teh range below pH 9.0, ellipsoidal or rectangular hematite particles in the range of pH 10.75-11.75 respectively. In the range above pH 12.50, acicular $\alpha$-FeOOH was formed. Basicity of product solution produced in the range of pH 10.7511.75 was increased slightly as compared with basicity of reastants due to hydroxly ion(OH-) formed by dissociation crystal growth controller. Citric acid which is acted as a crystal growth controller was adsorbed in the form of itrate anion(R-COO-) on the ferric hydroxide and exerted important role on the formation to the needle-like $\alpha$-${Fe}_{2}{O}_{3}$ particles in this reaction system.

• Journal of the Korean Society of Radiology
• /
• v.8 no.6
• /
• pp.325-332
• /
• 2014

Metallic nanoparticles have attractive properties in biomedical applications such as diagnostics and therapeutics. Cross linked dextran coated iron oxide nanoparticles (SPIONs) and silica coated gadolinium oxide nanoparticles (SPGONs) have been synthesized as a radiosensitizer in the proton beam cancer therapy. The dextran and silicaused for the protective moieties on the SPIONs and SPGONs respectively. Size distributions of synthesized nanoparticles were confirmed 3~5 nm for SPIONs and 30~100 nm for SPGONs by transmission electron microscope (TEM). Cell survival fraction measurement and Western blot assay were performed to evaluate the radiosensitization effects of synthesized radiosensitizer. The calculated radiosensitization of SPIONs and SPGONs at 90 % cell death from the measured cell survival curves were 1.23 and 1.03 respectively. Western blotting results also show the same consistent results that the amount of released cytochrome c from mitochondria was considerably increased for the cancer cells taken up SPIONs.

• Journal of the Korean Magnetics Society
• /
• v.24 no.1
• /
• pp.11-17
• /
• 2014

We measured the ferromagnetic resonance (FMR) signal using the monodisperse iron oxide nanoparticles with size D=4.67 nm, 5.64 nm and 6.34 nm synthesized by using the thermal decomposition method, respectively. The measured ferromagnetic resonance signals were compared with the calculated ones for superparamagnetic nanoparticles with lognormal volume distribution. The FMR linewidth broadening was propositional to tanh($V^2$), where V was volume of nanoparticles. The narrow linewidth of small size nanoparticles was due to the surface spins, while the broad linewidth of large size nanoparticles was due to the bulk spins affected by the crystalline structure of iron oxide nanoparticles. The superposition of surface and bulk effect was confirmed at D=5.64 nm nanoparticles, which was near the critical size for linewidth transition from surface effect to bulk effect.

• Elastomers and Composites
• /
• v.47 no.2
• /
• pp.168-173
• /
• 2012

Polystyrene-polyimide core-shell microsphere was prepared by dispersion polymerization using poly(amic acid) as the stabilizer. Iron oxide was formed at the microsphere by thermal decomposition of iron pentacarbonyl impregnated in the microsphere. The magnetic polystyrene-polyimide microsphere was monodisperse and the size was about 500 nm. The magnetic polystyrene-polyimide microsphere had 40% of iron oxide, which was identified as $Fe_3O_4$ by X-ray diffraction.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.11a
• /
• pp.47-58
• /
• 2005

From the world wide globalization of iron oxide industy, the global trade in iron oxide is changed rapidly and the production of iron oxide is increasing in China, currently. Iron oxide have a broad range of applications from construction materials to medical area. Therefore, it is expected that nanoparticulate iron oxides have many applications, too. There is a series of interesting applications are introduced, but in entirely different fields as they are known from conventional iron oxide.

• Membrane Journal
• /
• v.14 no.2
• /
• pp.149-156
• /
• 2004

This work focused on the degradation of natural organic matter (NOM) present in lake water using a combined pkotocatalysisimicrofiltration (MF) process. The system performances were investigated in terms of organic removal efficiency and membrane permeability. The addition of iron oxide particles (IOP) into the photocatalytic membrane reactor improved initial NOM removal by sorption, but during photocatalysis the removal efficiency was reversed, probably due to the scattering of UV light by IOP. The modification of TiO$_2$ surfaces by IOP deposition was conducted to enhance the photocatalytic NOM removal efficiency. A minimal amount of Impregnation of IOP on TiO$_2$ surfaces was required to prevent the light scattering effect as well. The coating of MF membranes with IOP helped to improve the NOM removal efficiency while sorbing NOM by IOP. Regardless of tile operating conditions and particles addition examined, no significant fouling was occurring at a flux of 15 L/$m^2$-h during entire MF operation.