• Journal of Forest and Environmental Science
• /
• v.9 no.1
• /
• pp.1-9
• /
• 1993

In the fall of 1992, growth characteristics and cone-bearing behaviour of crown top shoots were investigated on Pin us koraiensis trees, belonging to age class VII and IV, in the School Forests, College of Forestry, Kangwon National University to obtain basic information for the design of Korean pine cone harvesting machine. The results were summarized as follows. 1. The length of terminal main shoots and lateral shoots of the trees in age class IV was 27~56cm and 18~47cm, respectively, both of which were significantly higher than those of the trees in age class VII. 2. There was no significant difference between two age classes in the branching angle ($24{\sim}89^{\circ}$) of lateral shoots and in the diameter (10~30mm) of two-year-old main shoots. However, one-year-old terminal main shoots of age class IV showed the higher diameter (9~18mm) than those of age class VII. 3. Mean cone number per tree was 5, and mean fresh weight of cone was 272g. No significant difference was found in these traits between both age classes. 4. Cones, on an average, hung on the two-year-old main shoots 15cm above the basal ends in age class VII and 33cm above in age class IV. Both lengths are equivalent to one half and four fifths of the shoots, respectively. 5. The fresh weight range of crown-top shoots containing cones was 1.0~7.4kg.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.3
• /
• pp.258-268
• /
• 2013

Wood-based products market is new growth engine industry of "Green growth policy". Korean government established a law, sustainable use of wood, for expanding wood and wood-based products market in 2012. This study was conducted to seek sustainable measures for conservation and management of valuable natural resources, offer expanding quality assurance services for wood-based products, and explore measures for expanding wood-based products labeling system. Through discussed domestic and overseas trends and literatures that concern wood-based products labeling system and investigated case studies that were presently operational. For expanding quality assurance services of wood-based products, Korea Forest Service operates a wood-based products labeling system in integrated management through variety awareness and specialist assessment for each product. This process will make enhanced wood-based products labeling system expanded gradually. To evolve into $3^{rd}$ party quality assurance services on maturity age of labeling system, public communication will help improve awareness of producer and consumer. appropriate incentive program will attract voluntary participation from woodbased product industry. Producers consider environmental ethics in their business and consumer should exercise their right to know.

• Journal of Korea Water Resources Association
• /
• v.55 no.8
• /
• pp.577-588
• /
• 2022

This study aims to identify the limiting nutrient for algal growth in the Geum River and the significant pollutant sources from the tributaries affecting the water quality and to provide a management alternative for an improvement of water quality. An eight-year of daily data (2013~2020) were collected from the Water Environment Information System (water.nier.go.kr) and Water Resources Management Information System (wamis.go.kr). 14 water quality variables were analyzed at five water quality monitoring stations in the Geum River (WQ1-WQ5). In the Geum River, the water quality variables, especially Chl-a vary greatly in downstream of the river. In the open weir gate operation, TP (total phosphorus) and water temperature greatly influence the growth of algae in downstream of the river. A correlation analysis was used to identify the relationship between variables and investigate the factor affecting algal growth in the Geum River. At the downstream station (WQ5), TP and Temp have shown a strong correlation with Chl-a, indicating they significantly influence the algal bloom. The principal component analysis (PCA) was applied to identify and prioritize the major pollutant sources of the two major tributaries of the river, Gab-cheon and Miho-cheon. PCA identifies three major pollutant sources for Gab-cheon and Miho-cheon, respectively. For Gab-cheon, wastewater treatment plant, urban, and agricultural pollutions pollution are identified as significant pollutant sources. For Miho-cheon, agricultural, urban, and forest land are identified as major pollutant sources. PCA seems to be effective in identifying water pollutant sources for the Geum River and its tributaries in detail and thus can be used to develop water quality management strategies.

• Journal of Korean Society of Forest Science
• /
• v.105 no.2
• /
• pp.193-201
• /
• 2016

This study was carried out to analyze the nutritional composition, bioactive components, antioxidant activity, and cytotoxic assay of cancer cells on Rubus crataegifolius (RC) : R. crataegifolius from Jangseong (RC-J), R. crataegifolius from Hwaseong (RC-H), R. crataegifolius from Ulsan (RC-U), R. crataegifolius from Sunchang (RC-S), and R. crataegifolius from Pohang (RC-P). The peroximate composition had the largest amount of carbohydrate content among all kinds of RC. As far as the mineral contents of RC, Calcium comprised the highest amount ($996.6{\mu}g/g{\pm}0.8%$) and Natrium the lowest ($6.2{\mu}g/g{\pm}1.0%$). A total of 26 kinds of free amino acids and 18 kinds of component amino acids were analyzed in RC. The results of electron donating were high scavenging effects of 80% in water extract (RC-UW) and 82.6% in ethanol extract (RC-UE) in $500{\mu}g/ml$ concentration from RC-U. Also, the cytotoxic effects of cancer cells B16F10 (RC-UW and RC-PE), H1299 (RC-SW and RC-PE), and MCF-7 (RC-JW and RC-SE) appeared in RC. Therefore, we confirmed that new varieties may possibly be developed with functional materials.

• Journal of Korean Society of Forest Science
• /
• v.79 no.4
• /
• pp.388-397
• /
• 1990

This study was conducted to investigate the changes of land use and stand volume around Mt. Kuem-O by B/W aerial photographs in 1979 and B/W Infrared aerial photographs in 1988. The results obtained in this study were as follow : 1. In classification of forest type on aerial photographs, coniferous stand was dark tone and hardwood stand was light tone and irregularly rounded crowns. 2. In classification of coniferous stand, Pinus densiflora was narraw cone and rounded tip of crowns and rough texture, Pinus rigida was irregulary rounded and broadly conical crowns. 3. To refer to changes of forest land area, mixed forest was changed into P. desiflora (687ha), P. rigida (130ha) and hardwood stand (219ha). 4. The regression equations between crown diameter and DBH were significant at 1% level by F-test in all stands. So the equation, D=a+bCD was used to estimate DBH. 5. The tree height curve equations were significant at 1% level by F-test in all stands. To estimate tree height the equation, logH=loga+blogD was adopted in P. densiflora and L. leptolepis and $H=a-bD+cD^2$ was adopted in P. rigida, hardwood stand and mixed forest. 6. The highest volume per hectare was observed in L. leptolepis and mixed forest showed the greatest growth percentage, while the lowest volume per hectare and growth percentage were observed in hardwood stand.

• Journal of Korean Society of Forest Science
• /
• v.9 no.1
• /
• pp.61-74
• /
• 1969

Forest area in Korea ocupies as much as 68 percent of the total land area, but forest production figure in the statistics is rather trifling: that is about 2 percent of Gross National Production (G.N.P.), on the average. In view of the primary industrial sector, its production only weighs no more than 5 percent of this whole sector. Forest production written above refers only to direct forest income of the whole forest income. For the primary forest products they are in many cases used as raw materials for other interrelated industries. The added value there-from, which arises from round about production Process, in other word, indirect income is of most singnificance. Nevertheless, until nowadays forest production has been merely refered to timber production i, e, direct production but indirect income has never been looked upon. In this regard, calculated indirect forest income by means of input ratio method. The material used were Leontiefls tables of two 1963 and 1966 fiscal years, surveyed and analysed by The Bank of Korea. Indirect forest income calculated were 42,688,200,000 won in 1963 and 74,789,800,000 won in 1966 compared direct forest income of 14,361,000,000 won in 1963 and 17,709,000,000 won in 1966. So far as indirect forest income is considered total forest production indices composed of direct and indirect forest income amount to 8.23% in 1963 and 10.12% in 1966 of Gross National Production. Invisuable forest income which originates from, what we cal, indirect benefit of forestry such as land conservation, flood and drought control, soil run off control, scenic beauty and many others is naturall, not included in the calculation. As already mentioned, primary forest products are, for the most part, utilized as raw materials for other industries, therefore indirect forest income is rather appreciable than direct forest income, contributing for the growth and development of other connected industries. In these points of view, forestry must not be evaluated trifling in deciding industrial importances.

• Economic and Environmental Geology
• /
• v.37 no.5
• /
• pp.555-568
• /
• 2004

The demand of aggregate resources in Korea has been increased with a rapid economic growth since the 1980s. About 25% of the total aggregate production is derived from riverine aggregates, 20% to 25% from marine sands, 40% to 45% from crushed aggregate and the rest 5% to 15% from old fluvial deposits. The abundance of crushed coarse aggregates varies in the uniform distribution of country, but in general it can be concentrated in the most densely populated areas, five main cities. Typical rock types of the Korean crushed stones are classified as plutonic rocks of 27%, metamorphic rocks of 32%, sedimentary rocks and volcanic rocks of 18%, respectively. The most abundant coarse aggregate used in the country is obtained from granite (25% of total) and subordinately gneiss (20%), sandstone (10%) and andesite (10%). Although rock types using as dimension stone are only fifteen, those as aggregate amount up to twenty nine rocks. These rocks consist of plutonic rocks such as granite, syenite, diorite, aplite, porphyry, felsite. dike and volcanic rocks such as rhyolite, andesite, trachyte, basalt, tuff, volcanic breccia and metamorphic rocks such as gneiss, schist, phyllite, slate, meld-sandstone, quartzite, hornfels, calc-silicate rock, amphibolite. And sandstone, shale, mudstone, conglomerate, limestone, breccia, chert are main aggregate sources in tile sedimentary rocks. The abundance of plutonic rocks is the highest in Chungcheongbuk-do, and decreases as the order of Jeollabuk-do, Gangwon-do and Gyeonggi-do. In Jeollanam-do, volcanic aggregates occupy above 50%, on the contrary sedimentary aggregates are above 50% in Gyeongsangnam-do.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.4
• /
• pp.254-259
• /
• 2012

Peeling damage of trees is usually caused by Cervidae such as deer, roe deer because of the lack of food in forests. However, it happens as part of the developing of antlers in Jeju Island when the roe deer try to remove the Velvet-the skin of the antlers. The research area is the Hannam experimental forest (400 m up to 500 m above sea level) of Korea Forest Research Institute in Jeju Island, and the survey was carried out along the 6 km long of forest road with 5 m width on both sides. Twenty five tree species (total 267 stands) are damaged by peeling; 18 (134 stands) deciduous broad-leaved species, 5 (71 stands) in evergreen broad-leaved species, 2 (62 stands) coniferous species. The most common damaged species are in order of Daphniphyllum macropodum, Cryptomeria japonica, Lindera erythrocarpa, Clerodendrum trichotomum, Zanthoxylum schinifolium. Mainly damaged trees are approximately 3~4 years old saplings, and they show the mean height $120.7{\pm}42.4cm$, diameter measured at 5 cm height $1.5{\pm}0.5cm$. The Lowest peeling beginning height is $22.1{\pm}10.1cm$, and the mean length of peeling is $27.5{\pm}10.6cm$. Once the peeling damage happens, the saplings are infected by fungi secondly, and are distorted or dead, therefore the future structure of warm-temperate forests could be in influenced in species. Warm-temperate forest landscape and species change related to the climate change is a rising issue in Jeju Island. However the changes caused by peeling damage also could be an important issue in the natural process of forest environment, afforestation, local nursery and sustainable forest management of Jeju Island.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.4
• /
• pp.34-47
• /
• 2009

Rapid urbanization is causing environmental and ecological damage, development thoughtless for the environment, and social and economical issues. It is important to grasp urban growth situations and characteristics, reflect them, and establish a policy for the solution of issues pursuant to urbanization and the sustainable and efficient development of national land. This research aims to be used as basic data in establishing an urban policy by analyzing the situations and characteristics of urban growth for the past 20 years in our entire country rather than an existing district. For this, some urban districts were sampled using a 1980s and 2000s version of land cover map produced by Ministry of Environment, and then pattern analysis for urban growth by administrative district ranks was conducted using GIS and a statistical technique. As a result, the development zone area after 1980s has increased by 2.5 times as compared to that before 1980s, and especially in the farm villages neighboring the national capital region, it has increased by 21.2 times. Special cities and metropolitan cities were developed at the districts being low in altitude, close to the principal road and the major downtown, high in road ratio, and restricted environmentally, ecologically and legally, and were diverted from mountains, forests and grassland to urban land. On the other hand, farm villages neighboring a large city, farm villages neighboring the national capital region, and local farm villages were developed at the districts being high in altitude, far from the principal road and the major downtown, low in road ratio, and not restricted environmentally, ecologically and legally, and were diverted from farmland to urban land. That is, it can be seen that urban development has been actively realized despite the unfavorable topographical conditions in the suburban districts due to lack of available land and various regulations and policies as urban growth around big cities expands.

• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.7-16
• /
• 1985

To grasp canonical correlations, their related backgrounds in various growth factors of stem, the characteristics of stem by synthetical dispersion analysis, principal component analysis and canonical correlation analysis as optimum method were applied to Larix leptolepis. The results are as follows; 1) There were high or low correlation among all factors (height ($x_1$), clear height ($x_2$), form height ($x_3$), breast height diameter (D. B. H.: $x_4$), mid diameter ($x_5$), crown diameter ($x_6$) and stem volume ($x_7$)) except normal form factor ($x_8$). Especially stem volume showed high correlation with the D.B.H., height, mid diameter (cf. table 1). 3) (1) Canonical correlation coefficients and canonical variate between stem volume and composite variate of various height growth factors ($x_1$, $x_2$ and $x_3$) are ${\gamma}_{u1,v1}=0.82980^{**}$, $\{u_1=1.00000x_7\\v_1=1.08323x_1-0.04299x_2-0.07080x_3$. (2) Those of stem volume and composite variate of various diameter growth factors ($x_4$, $x_5$ and $x_6$) are ${\gamma}_{u1,v1}=0.98198^{**}$, $\{{u_1=1.00000x_7\\v_1=0.86433x_4+0.11996x_5+0.02917x_6$. (3) And canonical correlation between stem volume and composite variate of six factors including various heights and diameters are ${\gamma}_{u1,v1}=0.98700^{**}$, $\{^u_1=1.00000x_7\\v1=0.12948x_1+0.00291x_2+0.03076x_3+0.76707x_4+0.09107x_5+0.02576x_6$. All the cases showed the high canonical correlation. Height in the case of (1), D.B.H. in that of (2), and the D.B.H, and height in that of (3) respectively make an absolute contribution to the canonical correlation. Synthetical characteristics of each qualitative growth are largely affected by each factor. Especially in the case of (3) the influence by the D.B.H. is the most significant in the above six factors (cf. table 2). 3) Canonical correlation coefficient and canonical variate between composite variate of various height growth factors and that of the various diameter factors are ${\gamma}_{u1,v1}=0.78556^{**}$, $\{u_1=1.20569x_1-0.04444x_2-0.21696x_3\\v_1=1.09571x_4-0.14076x_5+0.05285x_6$. As shown in the above facts, only height and D.B.H. affected considerably to the canonical correlation. Thus, it was revealed that the synthetical characteristics of height growth was determined by height and those of the growth in thickness by D.B.H., respectively (cf. table 2). 4) Synthetical characteristics (1st-3rd principal component) derived from eight growth factors of stem, on the basis of 85% accumulated proportion aimed, are as follows; Ist principal component ($z_1$): $Z_1=0.40192x_1+0.23693x_2+0.37047x_3+0.41745x_4+0.41629x_5+0.33454x_60.42798x_7+0.04923x_8$, 2nd principal component ($z_2$): $z_2=-0.09306x_1-0.34707x_2+0.08372x_3-0.03239x_4+0.11152x_5+0.00012x_6+0.02407x_7+0.92185x_8$, 3rd principal component ($z_3$): $Z_3=0.19832x_1+0.68210x_2+0.35824x_3-0.22522x_4-0.20876x_5-0.42373x_6-0.15055x_7+0.26562x_8$. The first principal component ($z_1$) as a "size factor" showed the high information absorption power with 63.26% (proportion), and its principal component score is determined by stem volume, D.B.H., mid diameter and height, which have considerably high factor loading. The second principal component ($z_2$) is the "shape factor" which indicates cubic similarity of the stem and its score is formed under the absolute influence of normal form factor. The third principal component ($z_3$) is the "shape factor" which shows the degree of thickness and length of stem. These three principal components have the satisfactory information absorption power with 88.36% of the accumulated percentage. variance (cf. table 3). 5) Thus the principal component and canonical correlation analyses could be applied to the field of forest measurement, judgement of site qualities, management diagnoses for the forest management and the forest products industries, and the other fields which require the assessment of synthetical characteristics.