• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.2
• /
• pp.169-179
• /
• 2010

Satisfying the same probability of loss of control and essentially two fail operative performance with a triplex computer architecture requires a lot of modification of the conventional redundancy management design techniques, previously employed in quadruplex digital flight control computer. T-50 FCS for triplex redundancy management design applied an advanced digital flight control architecture with an I/O controller which is functionally independent of the digital computer to achieve the same reliability and special failure analysis and isolation schemes for fail operational goals with a triplex configuration. The analysis results indicated that the triplex flight control system is to satisfy the safety requirement utilizing the advanced flight control techniques and the system performance of the implemented flight control system was verified by failure mode effect test.

• Journal of Aerospace System Engineering
• /
• v.11 no.3
• /
• pp.31-38
• /
• 2017

As demand for best practices relative to flight test safety management operations and processes in the aviation industry grows, standards for such aspects of the industry in Korea should be examined. Therefore, in this paper, we conducted flight test operation processes and safety management program development studies based on documents related to flight tests of the Korean civil aviation KC-100, the military aircraft T-50, the FAA (Federal Aviation Administration), and CAAC (Civil Aviation Administration of China) for performance validation, test evaluation and safety certification for aircraft under development and remodeling. In addition, we introduced and analyzed best practices of the FTSC (Flight Test Safety Committee) applicable to aircraft flight test processes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.9
• /
• pp.2050-2058
• /
• 2011

The objective of this thesis is to research the software requirement management system for the development of operational flight program (OFP) which is embedded in aircraft avionics. It offers the function to record the requirement revision log. In fact, the COTS (commercial off-the-shelf) program which has similar function already exists in the market. But this kind of software programs are too complicated and relatively expensive in acquisition. Furthermore, they require too expensive maintenance cost, medium sized business company, this thesis intended to provide the software requirement management system that can be simply installed and easily used.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.5
• /
• pp.349-357
• /
• 2022

Since the flight control computer of unmanned aerial vehicle (UAV) is a flight critical equipment, it is necessary to ensure reliability and safety from the development step, and a redundancy-based fault management design is required in order to operate normally even a failure occurs. To reduce cost, weight and power consumption, the dual-redundant flight control system design is considered in UAV. However, there are various restrictions on the fault management design. In this paper, we propose the fault detection and isolation designs for the dual-redundant flight control computer to satisfy the safety requirements of an UAV. In addition, the flight control computer developed by applying the fault management design performed functional tests in the integrated test environment, and after performing FMET in the HILS, its reliability was verified through flight tests.

• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.188-200
• /
• 2002

• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.279-287
• /
• 2018

Flight tests for aircraft development and certification have higher air accidents risk than other aerospace industries. Accordingly risk identification necessary for risk management in the safety management system is a very important factor in preventing similar air accidents during flight tests. But internationally issued accident statistics are usually confined to commercial transport aircraft and they do not reflect characteristics of flight tests, also databases to hazards identification during flight tests are not established or available in Republic of Korea. Therefore, we identified flight test procedures and traced the major causes of aviation accidents based on the statistics and preventive materials for risk management which were issued by international organizations and advanced countries of aviation. A total of 312 final reports classified as flight test among air accident/incident database held by U.S. NTSB were researched and about 200 flight test hazard were identified. The results of this study will be used as basic data for establishing the safety management system of the national comprehensive flight performance test site.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.537-544
• /
• 2018

A national comprehensive aviation test center is being constructed for the purpose of flight tests for development and modification of aircraft or flight inspections for the development of navaids. Flight testing is a high-risk task, so strict risk management processes are required prior to operation. In addition, since the flight test center is subject to the airdrome regulations under the current law, the introduction of the safety management system will enhance safety as usual in ordinary airports. The establishment of a safety management system based on ICAO criteria is an optimal means of ensuring safe and effective operation of the test center and may mitigate the risks that may arise during flight testing. This paper focuses on risk assessment and mitigation required for safety management at the flight test center. We conducted risk assessments on the flight hazards identified in the previous study. Then the high risk group of hazards were selected and risk mitigation techniques such as avoidance, reduction, acceptance, and control were applied.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2013

To have the competitiveness in the future worldwide small aircraft market, we should be able to develop the aircraft which is highly safe, easy to fly, and having excellent flight characteristics. FBW(Fly-By Wire) system is essential for the enhancement of flight safety and control easiness. FBW system that has been applied only to the modern fighter and transport aircraft is recently applied to smaller aircraft such as regional aircraft, business aircraft and even small aircraft. The purpose of this research includes the development of flight control computer, the definition of FBW system component, the design concept of each component for redundant management, OFP(Operational Flight Program) development, FBW system integration and HILS(Hardware In-the Loop Simulation) verification environment to test this FBW system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.10
• /
• pp.979-986
• /
• 2011

In this paper, an embedded program of a flight control system for a small high performance UAV is introduced. The program consists of modules for device management and guidance and control. The device management system handles navigation sensors and mission equipments. The program for the guidance and control system is used to accomplish various kinds of missions and realize automation of flight control. Driver programs embedded in the device management system for operation of sensors and external devices are based on Texas Instrument's DSP/BIOS RTOS(realtime operating system). The on-board programs for the guidance and control system is obtained by using the model-based auto code generation technology.

• Journal of Advanced Navigation Technology
• /
• v.23 no.4
• /
• pp.281-288
• /
• 2019

A Flight test is an important process that must be performed to maintain airworthiness in the aircraft lifecycle, including aircraft development and certification. Flight test can be conducted for the purpose of demonstrating or verifying compliance with the applicable standard. Results of the flight test air accident analysis confirm that it is caused by a combination of various factors as well as aircraft. The International Civil Aviation Organization recommends the establishment and implementation of a safety management system to prevent aircraft accidents, but it does not reflect the specificity of the flight test. As such, advanced countries are providing separate criteria to assist stakeholder in conducting flight test safety management. This study investigates and analyzes relevant regulations of advanced countries, in accordance with the construction of a national flight performance test site in Korea, and proposes government-level guidelines to help stakeholders develop their flight test operation manuals. The guidelines discuss topics such as organizational composition, safety and risk management, flight operation, personnel management, and administrative issues.