• Journal of the Korean GEO-environmental Society
• /
• v.11 no.5
• /
• pp.25-34
• /
• 2010

In this study characteristics for reclaimed ash was studied to enlarge the usage of reclaimed ash which is reaching to 72 million ton producted from whole thermal power plants in South Korea. Fly ash and bottom ash are reclaimed separately at some of thermal power plants. However, typically bottom ash and fly ash are mixed when they are buried at most of the thermal power plant, as a result the engineering characteristics of ponded ash are not investigated properly. In order to investigate the engineering characteristics of the ponded ash, laboratory tests were performed with ponded ash and fly ash from youngheung and samcheonpo thermal power plants. Specific gravity, unit weight, and grain size analysis test were fulfilled to evaluate the physical characteristics and triaxial permeability test, direct shear test, unconfined compressive strength test, compaction test were performed to evaluate the mechanical characteristics. And also engineering characteristics of coal ash from anthracite and Bituminous thermal power plants were compared and studied respectively. As a result of the study, it was confirmed that using coal ash from Bituminous thermal power plants can be effective in the place where lightweight materials are required and using coal ash from anthracite thermal power plants can be effective as backfill material which require higher permeability. Finally, it was confirmed that fly ash from youngheung thermal power plants which has the lowest permeability among the tested material is suitable for a field requiring impermeable material.

• Informatization Policy
• /
• v.18 no.3
• /
• pp.88-107
• /
• 2011

This paper proposes a prepaid system promotion policy for the 3G(WCDMA) MVNO with regard to the newly included paragraphs 3, 4 and 5 of Article 32 (User Protection) and Article 38 (Provision of Wholesale Telecommunications Services) of the Telecommunication Business Act, which was revised on March 22, 2010. As of June 2011, there are only a few prepaid system subscribers to the mobile communications service due to various limitations, including prepay, interconnection, carrier selection, the MVNO policy, and number portability. However, overseas communications service regulatory agencies and service providers are increasingly presenting policies and strategies for mobile prepaid plans, in order to accommodate the various customer demands that are increasing the use of smart phones and data. This paper advances various proposals concerning promotion of the prepaid system by the 3G MVNO under the current Telecommunication Business Act, including separation of the prepaid data system and the mobile network; introduction of a monthly fixed-rate hybrid prepaid system, a top-up system and USIM system; introduction of mobile network carrier selection; differentiated retail discounts between prepaid and post-paid prices; revision of the retail discount policy for wholesale provision; increase in the number of mandatory service providers; and in-depth consideration of the introduction of a number portability policy for the prepaid and post-paid systems.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.3
• /
• pp.134-145
• /
• 2013

Road construction projects are parcelled into sub-sections which are then tendered to individual contractors for construction. The type of work and equipments used are similar for each sub-section. However, such equipment are not shared on a regular basis among the contractors and only partially performed in an informal and ad hoc manner. Consequently, road construction equipment suffer from low utilization and increased leasing costs. Lean construction and Program Management approaches stress the importance of collaboration among individual participants in a way that increases the collective cost savings of the entire project. This research attempts to apply such theories with the notion that under utilization of expensive equipment can be improved by formalizing a way to enable the sharing of equipment in large, public sponsored, multi-sectioned road construction projects. A system was developed consisting of a set of criteria and processes that enables automatic allocation of equipment to multiple sites on daily basis, in a way that minimizes equipment costs and improves their individual utility. The system was then applied in allocating three different types of equipment to an actual road construction project with four sub-sections for three months. A new metric, nDPR showed that utilization improved for all equipment and also equipment related costs were decreased by 4.45%. Results also showed that increased shared opportunities of equipment correspond to an increase in utilization and cost savings.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.371-379
• /
• 2008

In this study, seismic elastic wave and dynamic elastic modulus properties are investigated by down-hole seismic tests that were applied to the 11 gneiss area. The research results show that the realtionship between the two properties are $V_s=0.5589{\times}V_p$ in gneiss. The relationship between the two properties are separated into two groups. Group 1 is influenced mainly by the specific gravity of rock, but group 2 is influenced mainly by the joint aperture. As weathering progresses, group 1 clearly shows a decreasing tendency. In fresh and slightly weathered rock-mass, correlations between $V_p$ and dynamic elastic modulus is expressed in linear line but in moderately-highly weathered rock-mass, correlations between $V_p$ and dynamic elastic modulus is expressed curve as a quadratic function. Correlations between $V_s$ and dynamic elastic modulus are analyzed similar with a $V_p$ case.

• Resources Recycling
• /
• v.29 no.4
• /
• pp.67-72
• /
• 2020

Recycling processes of spent copper wires cosisnt of several steps of cutting and chopping processes for peeling covering materials followed by gravity separation processes, where copper is recovered. Because copper thin wires could be lost during further recycling processes, the wire may need to be further treated. In the present study, the copper thin wire was treated with ball milling to prevent the loss. Since the aggregation of the copper wire could be formed by bending and entangling the copper wire each other, the degree of flexion of the copper wire was measured after ball milling. When the 0.5 cm and 3 cm copper wires were used, the 0.5 cm copper wire was not bent and the 3 cm copper wires were aggregated regardless of the ball addition. When the 1 cm and 2 cm copper wires were used, the degree of flexion was remarkable when the balls were added. In the tests using 2 cm copper wires, the aggregation ratio of the copper wire gradually increased with the amount of the 20 mm alumina ball, and when 200 ml of 30 mm alumina ball was used, the aggregation ratio increased to 89.29 %, but after increasing the ball amount further, the aggregation ratio decreased. Thus, it is expected that the loss of the copper wire could be reducedif when the copper thin wire is treated with ball milling by the aggregation of copper thin wires.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.5
• /
• pp.467-472
• /
• 1991

In order to investigate the changes of lipid ingredient and fatty acid content in flint corn by a growth process, total lipids from flint corn(Zea may l.) were extracted, purified and fractionated into three lipid classes (neutral lipid ; NL, glycolipid ; GL, phospolipid ; PL) by silicic acid column chromatography (SACC). Non-polar lipid ingredients and fatty acid contents were determined by thin layer chromatography (TLC) and gas chromatography (GC). And non-polar lipid ingredients were quantitatived by TLC scanner. The crude oil among proximare composition increased 2.74% to 4.43% and NL and PL were fractionated by SACC increased 48.5% to 86.02%, 1.01% to 2.73%, respectively. But GL decreased 50.4% to 11.25%. Neutral lipid ingredients identified monoglyceride, were 1.1~3.7%, 11.9~16.1%, 2.3~4.2%, 16.7~21.5% and 58.5~63.6%, respectively. The major fatty acids of NL were linoleic (48.9~61.0%), oleic(22.3~34.2%), palmitic (10.3~11.7%) acids and stearic, linolenic acids were also detected as minor components. The ratio of total unsaturated fatty acid to total saturated fatty acid presented a higher percentage of 5.87~6.34. The physico-chemical characteristics of flint corn lipids were presented as specific gravity presented 0.920, refractive index 1.468, saponification value 191.2, unsaponificable matter 0.97%, acid value 0.58 and iodine value 124.6, respectively.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1916-1932
• /
• 2008

The railway accident is characterized by widespread and great(immerse) damage to our society when an accident occurred even if the probability of a railway accident is low. It is no doubt that the role of a rolling stock driver who are active in the first line of the rail safety driving is the most important to prevent an unexpected railway accident. Before new railway safety law being taken into effect, each railway operating organization had the responsibility of training a rolling stock driver by qualification criteria (the requirements or standards of competency), training period, probation period decided on their own standards. To train drivers driving same locomotive model, each railway operating organization had a variety of standards to draft and train trainees. Consequently, It was considered inefficient way to train and manage rolling stock drivers. However, after implementing the new railway safety law, a new system including training and evaluation process to issue driver's license on the condition that entire requirements are satisfied has been established. To prove the competency of the rolling stock driver objectively, training center and third-party evaluation center are divided individually and assigned by government office. Training center should design the training program to allot theatrical education time for different trainee group and to secure maximum practical training time utilizing simulator system to enhance the rolling stock driver's competency. This study analyzes certain conditions necessary to maximize the effectiveness and practical use of training for aquisition of a driver's license and the problems of the existing rail safety law and the ways to improve them.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.3-14
• /
• 2020

This study aims to introduce and review on the recovery technologies of rare earth elements(REEs) from coal ash. Many researchers have been carried out by various beneficiation processes, such as particle size separation, magnetic separation, specific gravity, and flotation to recover rare earth elements from coal ash generated from Pulverized Coal(PC) boiler. Through the beneficiation process, it was confirmed that concentration of rare earth elements was much lower than the 4,700 ppm, and that additional enrichment treatment through wet process was needed for the products recovered after the beneficiation process. It was confirmed that the rare earth elements contained in coal ash were applied to the leaching process after pretreatment such as alkali-fusion to improve leaching efficiency. Although beneficiation and leaching methods have been studied, its optimum recovery technologies for rare earth elements not been confirmed up to now, research on the recovery of rare earth contained in coal ash is reported to continue. In case of Korea, the technology for the recovery of rare earth elements from coal ash and coal by-product could not been confirmed up to present. In these reasons, it is urgent to develop technologies such as beneficiation and leaching process continuously.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.2
• /
• pp.90-98
• /
• 2011

This study aims to discuss the characteristics of garden architecture in Italian Renaissance Villa Lante that was constructed by the cardinal in Bagnaia at 16th century through actual survey and analysis of the garden's elements. To do this, it was studied in two ways: Analysis of the present conditions and review historical documents. The results are as follows. First, the buildings, the gardens and the surrounding landscapes are visually connected each other in relations between the topography and the surrounding landscapes. Second, the spatial composition accepted Neoplatonic law of multiple proportions and was influenced by ancient myth and "Liber ruralium commodorum" of Pietro de Crescenzi(1305). Third, the garden's elements consist of plants, buildings and items. In plants, the upper plants are fir tree, cypress and pine tree and the lower plants are english holly, box tree and sweet oleander. The buildings are casino, loggia and terrace. The items are pot, sundial, chair, viewing platform and fountain. The result of this study, the political and social, technical phenomena which constitute construction pattern affected the locational property and the spatial organization of the neighbor on Villa Lante.

• Food Science and Industry
• /
• v.53 no.1
• /
• pp.69-83
• /
• 2020

For the development of the chitosan industry in Korea, the catch of red snow crabs caught on the east coast is rapidly decreasing. Therefore, it is urgent to develop raw materials that can replace the red snow crab as the top priority to solve the supply and demand problems, as well as wastewater treatment costs account for a large proportion of the cost of chitosan. In order to solve the problems, continuous research on biological extraction methods such as enzymatic extraction and microbial fermentation will increase production efficiency and lower unit cost as well as chemical extraction methods. Further efficient manufacturing method can be established. Establishing of novel techniques is indispensable for production of high-purity chitosan and the ability to regulate and separate the molecular weight, as well as joint research with industry, academia and research institute for the research and development of high-functional chitosan derivatives.