A Study on the Characteristics of Dynamic Elastic Modulus in GyeongGi Gneiss Complex by Down Hole Test

하향식 탄성파를 통한 경기 편마암의 동탄성 특성연구

  • Published : 2008.12.30

Abstract

In this study, seismic elastic wave and dynamic elastic modulus properties are investigated by down-hole seismic tests that were applied to the 11 gneiss area. The research results show that the realtionship between the two properties are $V_s=0.5589{\times}V_p$ in gneiss. The relationship between the two properties are separated into two groups. Group 1 is influenced mainly by the specific gravity of rock, but group 2 is influenced mainly by the joint aperture. As weathering progresses, group 1 clearly shows a decreasing tendency. In fresh and slightly weathered rock-mass, correlations between $V_p$ and dynamic elastic modulus is expressed in linear line but in moderately-highly weathered rock-mass, correlations between $V_p$ and dynamic elastic modulus is expressed curve as a quadratic function. Correlations between $V_s$ and dynamic elastic modulus are analyzed similar with a $V_p$ case.

본 연구에서는 경기도 일대의 편마암지역 11곳에서 다운홀(down-hole) 탄성파탐사를 이용하여 획득한 탄성파속도를 이용, 편마암지역에서의 탄성파 속도와 동탄성계수와의 상관성을 조사하였다. 연구결과 편마암에서의 탄성파속도의 특성은 $V_s=0.5589{\times}V_p$ 상관관계를 보여준다. 탄성파 속도와 동탄성계수와의 상관관계는 두 개의 군으로 분리된다. 풍화가 진행됨에 따라 첫 번째 군은 암석의 비중에 큰 영향을 받지만 두 번째 군에서는 절리면의 간격에 영향을 받는다. 풍화가 진행됨에 따라 첫 번째 군은 감소하는 경향을 보인다. 경암반에서의 압축파속도($V_p$) 동탄성계수($E_d$, $G_d$, $K_d$)의 상관관계는 선형으로 분석되었지만, 보통암반에서의 압축파속도($V_p$)와 동탄성계수($E_d$, $G_d$, $K_d$)의 상관관계는 2차 함수 포물선 곡선의 형태를 띠는 것으로 분석되었다. 전단파속도($V_s$)와 동탄성계수($E_d$, $G_d$, $K_d$)의 상관관계 또한 압축파속도($V_p$)와 유사한 결과를 보이는 것으로 분석되었다.

Keywords

References

  1. 박충화 외, 2002, 시추공 물리탐사를 이용한 동탄성계수 와 암상과의 상관성 분석, 한국지구과학회지, 23(6), 507-513
  2. 손호웅 외, 2000, 지반환경물리탐사, 시그마프레스, 716
  3. 송무영 외, 2002, 시추공 물리탐사를 통한 지반물성과 암 상과의 상관성 분석, 대학지질공학회지, 12(2), 127-135
  4. 민경덕 외, 1987, 응용지구물리학, 우성문화사, 772
  5. 이벽규, 2004, 암반분류별 동탄성계수 특성 연구, 공학석 사학위논문, 서울시립대학교
  6. 한국암반공학회 외, 1999, 건설기술자를 위한 지반조사 및 시험기술, 799
  7. 한국지반공학회, 2000, 토목기술자를 위한 암반공학, 구 미서관, 678
  8. Bieniawski and Z. T., 1989, Engineering rock mass classification, John Wiley, Rotterdam, 272
  9. International Society for Rock Mechanics (ISRM), 1981. Basic geotechnical description of rock masses. Int. J. Rock Mech. Min. Sci. 18(1), 85-110
  10. Yoshikazu, K. et al., 1997, Correlation between the results of geophysical prospecting and geotechnical properties, soil and foundations, The japanese geotechnical society, 45(9), Ser. No. 476, 11-14