Browse > Article

A Study on the Engineering Characteristics of Power Plant Coal Ash  

Kuk, Kilkeun (한양대학교 대학원 건설환경공학과)
Kim, Hyeyang (한양대학교 대학원 건설환경공학과)
Chun, Byungsik (한양대학교 공과대학 건설환경공학과)
Publication Information
Journal of the Korean GEO-environmental Society / v.11, no.5, 2010 , pp. 25-34 More about this Journal
Abstract
In this study characteristics for reclaimed ash was studied to enlarge the usage of reclaimed ash which is reaching to 72 million ton producted from whole thermal power plants in South Korea. Fly ash and bottom ash are reclaimed separately at some of thermal power plants. However, typically bottom ash and fly ash are mixed when they are buried at most of the thermal power plant, as a result the engineering characteristics of ponded ash are not investigated properly. In order to investigate the engineering characteristics of the ponded ash, laboratory tests were performed with ponded ash and fly ash from youngheung and samcheonpo thermal power plants. Specific gravity, unit weight, and grain size analysis test were fulfilled to evaluate the physical characteristics and triaxial permeability test, direct shear test, unconfined compressive strength test, compaction test were performed to evaluate the mechanical characteristics. And also engineering characteristics of coal ash from anthracite and Bituminous thermal power plants were compared and studied respectively. As a result of the study, it was confirmed that using coal ash from Bituminous thermal power plants can be effective in the place where lightweight materials are required and using coal ash from anthracite thermal power plants can be effective as backfill material which require higher permeability. Finally, it was confirmed that fly ash from youngheung thermal power plants which has the lowest permeability among the tested material is suitable for a field requiring impermeable material.
Keywords
Fly ash; Ponded ash; Construction material;
Citations & Related Records
연도 인용수 순위
  • Reference
1 강철(2006), 바텀애시를 이용한 경량칸막이재 개발에 관한 실 험적 연구, 석사학위논문, 공주대학교, pp. 17.
2 권혁두(2008), 지반보강 및 차수 그라우팅재로서의 Bottom Ash 활용에 관한 연구, 박사학위논문, 서울시립대학교, pp. 2.
3 김범주(2004), 미국의 석탄회 재활용 동향, 한국지반환경공학회, Vol. 5, No. 3, pp. 62-64.
4 박민용(2004), 경량성토재로서의 부산석회 재활용 방안 연구, 석사학위논문, 홍익대학교, pp. 12.
5 이인모(2000), 토질역학의 원리, 새론, pp. 151.
6 천병식, 고용일(1992), 석탄회의 도로성토재 및 노상재로서의 활용을 위한 비회와 저회의 적정혼합비, 대한토목학회 논문집, Vol. 12, No. 1, pp. 177-176.
7 천병식, 고용일, 오민열, 권형석(1990), 산업폐기물로 발생되 는 석탄회의 토질역학적 특성에 관한 연구, 대한토목학회 논문집, Vol. 10, No. 1, pp. 115-123.
8 천병식, 권형석 문보원, 류지양(1997), 석탄회의 도로노반재 로서의 활용에 관한 연구, 1997년 학술대회 논문집(II), 대한 토목학회, pp. 61-64.
9 천병식, 장명순, 최현석(1996), 석탄회의 성토재 및 포장재로 서의 재활용을 위한 기초연구, 1996년 연약지반처리위원회 봄 학술세미나, 한국지반공학회, pp. 931-107.
10 천병식, 조영구(1988), 화력발전소에서 부산되는 석탄회의 공학적 특성, 대한토목학회 논문집, Vol. 8, No. 2, pp. 59-66.
11 한국도로공사(2001), 도로설계요령, pp. 35-104.
12 한국콘크리트학회(2003), 콘크리트 표준시방서 해설, 한국콘 크리트 학회, pp. 49-78.
13 한국표준규격(2001), 흙의 다짐 시험 방법, KS F 2312, pp. 1-8.
14 한국표준규격(2001), 흙의 일축 압축 시험 방법, KS F 2314, pp. 1-7.
15 한국표준규격(2005), 굵은 골재 및 잔골재의 체가름 시험 방법, KS F 2502, pp. 1-8.
16 한국표준규격(2005), 석재의 흡수율 및 비중 시험 방법, KS F 2518, pp. 1-6.
17 한국표준규격(2005), 흙의 입도 시험 및 물리 시험용 시료 조제 방법, KS F 2301, pp. 1-7.
18 한국표준규격(2006), 긁기 경도에 의한 굵은 골재의 연석량 시험방법, KS F 2516, pp. 1-8.
19 한국표준규격(2006), 흙의 공학적 분류 방법, KS F 2324, pp. 1-10.
20 한국표준규격(2007), 굵은 골재의 밀도 및 흡수율 시험방법, KS F 2503, pp. 1-11.
21 한국표준규격(2007), 로스앤젤레스 시험기에 의한 굵은 골재 의 마모 시험, KS F 2508, pp. 1-12.
22 한국표준규격(2007), 압밀 배수 조건에서 흙의 직접 전단시험 방법, KS F 2343, pp. 1-9.
23 한국표준규격(2007), 콘크리트용 골재, KS F 2526, pp. 1-13.
24 환경부(2008), 제 4차 자원재활용 기본계획, pp. 100-102.
25 American Coal Ash Association(2008), CCP Survey, Retrieved from http://acaa.affiniscape.com/association/8003/files/2008_ACAA_ CCP_Survey_Report_FINAL_100509.pdf.
26 AASHTO(2009), Standard Method of Test for Density (Unit Weight), AASHTO T 121, pp. 1-4.
27 AASHTO(2005), Standard Method of Test for Air Content of Freshly Mixed Concrete by the Pressure Method, AASHTO T 152, pp. 1-4.
28 ASTM(2003), Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter, ASTM D5084-90, pp. 1-8.