• The Journal of the Acoustical Society of Korea
• /
• v.17 no.6
• /
• pp.74-78
• /
• 1998

보로 이루어진 복합구조물의 진동 에너지밀도와 파워를 구하기 위하여 파워흐름해 석법을 수행하였다. 복합구조물인 연성보에서는 구조 연결점에서의 파동변환에 따라 굽힘파, 종파, 비틀림파가 존재한다. 구조연결점에서 파동들의 파워투과와 반사를 고려하기 위해서는 파동전달법을 도입하였다. 이러한 파워흐름해석법을 이용하여 연성보에서 발생하는 열러 특 성의 파동들이 전달하는 에너지밀도와 파워의 공간적 분포 값을 엄밀해와 비교하였다. 결과 로써 파워흐름해석법은 고주파수영역에서 진동하는 연성보의 진동에너지와 파워의 공간적 분포를 예측하기 위해서 유용하게 사용될 수 있음을 보였다. 또한 파워흐름해석법의 중주파 수 영역에서의 적용 가능성에 대해 검토하였다.

• Journal of the Korean Society for Railway
• /
• v.17 no.1
• /
• pp.7-13
• /
• 2014

Stiffness variations and wave propagation/reflection in railway catenaries are the primary sources of contact loss between a pantograph and a railway contact wire. This paper analyzes which design parameter is more important for 200km/h conventional rail and 300km/h high-speed rail, in order to effectively reduce the contact loss. For the high-speed rail, the wave propagation and reflection in the overhead contact lines are more influential than the stiffness variation over a span. When the high-speed rail needs to speed-up, it is necessary to develop higher strength contact wires in order to increase the wave propagation speed. In addition, the dropper clamp mass should be reduced in order to alleviate the wave reflection. However, it is noted that the increase in the tension to a messenger wire could deteriorate the current collection quality, which contrasts with expectations. For the 200km/h conventional rail, the stiffness variation over a span is more influential than the wave propagation and reflection. Therefore, shortening span length, increasing the tension in the contact wire and optimizing the location of the droppers are recommended for a smoother stiffness variation over the span.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.2
• /
• pp.149-157
• /
• 2001

From the weakly nonlinear mild-slope wave equations introduced by Nadaoka et al.(1994, 1997), a set of weakly nonlinear wave equations for rapidly varying topography are derived by including the bottom curvature and slope-squared tenns ignored in the original equations ofNadaoka et al. To solve the linear version of extended wave equations derived in this study one-dimensional finite difference numerical model is con¬structed. The perfonnance of the model is tested for the case of wave reflection from a plane slope with various inclination. The numerical results are compared with the results calculated using other numerical models reported earlier. The comparison shows that the accuracy of the numerical model is improved significantly in comparison with that of the original equations ofNadaoka et al. by including a complete set of bottom curva1w'e and slope¬squared terms for a rapidly varying topography.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.422-425
• /
• 2005

In an transversely isotropic composite laminates, the velocities, the particle directions and the amplitudes of reflected and transmitted waves were obtained using the equation of motion, the constitutive equation, and the displacement equation expressed by wave number and frequency Eigenvalue problem involving a velocity was solved by Snell's law. Finally, the results were confirmed by T300 Carbon fiber/5208 Epoxy materials. This approach could be applied to the detection of flaws in a transversely isotropic composite laminates by the water immersion C-scan procedure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.1
• /
• pp.99-106
• /
• 2011

In this study, the dynamic contact of a catenary system is analyzed by using the finite element method. We derive the equations of motion for the catenary system by taking into consideration tension on the catenaries. After establishing the weak form, they are spatially discretized with beam elements. Then, we analytically calculated the wave propagation speed for a string, bar, beam, and the catenaries subjected to tension. Further, finite element computer program for contact dynamic analyses is developed. Finally, we analyze the wave propagation response corresponding to the moving load to the contact line are calculated.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.269-271
• /
• 2021

본 논문에서는 실제 현실에서 표현되는 소리의 특징인 파동(Sound wave)과 흐름(Sound flow) 그리고 회절(Diffraction of sound)을 가상환경에서 실시간으로 표현할 수 있는 방법을 제안한다. 우리의 접근 방식은 소리가 재생되는 위치로부터 장애물 여부를 판단하고, 장애물이 존재할 시, 장애물로 인해 반사와 회절된 새로운 소리 위치를 계산한다. 이 과정에서 레이트레이싱 기반으로 장애물과의 충돌 여부를 판단하고, 충돌에 의해 굴절된 벡터를 이용하여 장애물 너머에서 들리는 소리의 크기를 계산하며, 충돌된 레이의 개수에 따라 소리의 크기를 감쇠시킨다. 본 논문에서 제안하는 방법을 이용한 소리의 회절은 물리 기반 접근법에서 나타나는 회절 형태를 실시간으로 표현했으며, 장애물에 따라서 회절 패턴이 변경되고, 이에 따라 소리의 크기가 자연스럽게 조절되는 결과를 보여준다. 이 같은 실험은 실제 현실에서 나타나는 소리의 퍼짐과 같은 특징을 거의 유사하게 복원해냈다.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.102-107
• /
• 2006

Recently, rapid developments in computer hardware have enabled reverse-time migration to be applied to various production imaging problems. As a wave-equation technique using the two-way wave equation, reverse-time migration can handle not only multi-path arrivals but also steep dips and overturned reflections. However, reverse-time migration causes unwanted artefacts, which arise from the two-way characteristics of the hyperbolic wave equation. Zero-lag cross correlation with diving waves, head waves and back-scattered waves result in spurious artefacts. These strong artefacts have the common feature that the correlating forward and backward wavefields propagate in almost the opposite direction to each other at each correlation point. This is because the ray paths of the forward and backward wavefields are almost identical. In this paper, we present several tactics to avoid artefacts in shot-domain reverse-time migration. Simple muting of a shot gather before migration, or wavefront migration which performs correlation only within a time window following first arriving travel times, are useful in suppressing artefacts. Calculating the wave propagation direction from the Poynting vector gives rise to a new imaging condition, which can eliminate strong artefacts and can produce common image gathers in the reflection angle domain.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.6
• /
• pp.401-406
• /
• 2011

In this study, generation methods of oblique incident wave are newly proposed and examined using the fully non-linear numerical model with non-reflected wave generation system(LES-WASS-3D). In order to verify, free surface elevation and horizontal velocities are compared with $3^{rd}$ -order Stokes wave theory in 3-D oblique incident wave field. As a results, it is revealed that the numerical results by newly proposed technique are in good agreement with the theory.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1353-1359
• /
• 2004

There are many massive components added on the railway overhead-line. These components cause larger fluctuations of contact forces, which are due to wave reflections and Doppler effects when a high-speed train passes those. In this paper, mathematical formula are derived for the relation between the added mass and contact force fluctuations. Using the derived formula, we calculate a added mass on the overhead-line which cause amplification factor to become 2.5. German design practice requires that amplification factor due to the wave reflection should be less than 2.5 to obtain good current collection performance. To show the validity of the formula, simulation results are compared with the calculation results. Simulation results showed that contact force fluctuations grow rapidly when an added mass is larger than the calculation result. Therefore, the simple form of formula can be used for estimating maximum added mass not to cause large fluctuations of contact forces in early design phase.

• Geophysics and Geophysical Exploration
• /
• v.19 no.3
• /
• pp.131-135
• /
• 2016

Coarray is a parallel processing technique introduced in the Fortran 2008 standard. Coarray can implement parallel processing using simple syntax. In this research, we examined applicability of Coarray to seismic parallel processing by comparing performance of seismic data processing programs using Coarray and MPI. We compared calculation time using seismic wave propagation modeling and one to one communication time using domain decomposition technique. We also compared performance of parallel reverse-time migration programs using Coarray and MPI. Test results show that the computing speed of Coarray method is similar to that of MPI. On the other hand, MPI has superior communication speed to that of Coarray.