• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.590-592
• /
• 1999

초고속 데이터 처리 및 전송에 필수적인 B-ISDN에 있어서 디지털 시스템들이 동기를 맞추어 동작을 하여야 데이터의 손실과 잡음을 막을 수 있다. 초고속 데이터를 전송하는 ATM 교환기에 있어 동작에 필요한 기준 클럭을 생성하여 시스템 전체에 공급하는 시스템 클럭 생성기는 기능의 안정성과 고신뢰성을 보장하여야 한다. 시스템 클럭 생성기의 운용 중 발생할 수 있는 장애에 대하여 필요한 장애 처리를 수행하기 위하여 내장형 제어용 소프트웨어를 설계하여 구현하였다. 이 제어용 소프트웨어는 시스템 클럭 생성기의 장애를 감시하여 처리하므로 시스템 전체에 클럭의 중단없이 안정되게 ATM교환기를 동작하게 한다. 본 고에서는 ATM 교환기의 시스템 클럭 생성기에서 발생하는 장애 처리를 위한 소프트웨어의 설계와 구현에 관하여 기술한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.10
• /
• pp.1537-1544
• /
• 2022

When designing chip, it considers design specification, timing problem, and clock synchronization on place & route (P&R) process. P&R process is complicated because of considering various factors. Chip uses clock tree synthesis (CTS) to reduce clock path delay. The purpose of this study is to examine shallow-CTS algorithm for checking clock tree synthesizable. Using open source Parser-Verilog, register transfer level (RTL) synthesizable Verilog file is parsed and it uses Pre-CTS and Post-CTS process that is included shallow-CTS. Based on longest clock path in the Pre-CTS and Post-CTS stages, the standard deviation before and after buffer insertion is compared and analyzed for the accuracy of CTS. In this paper, It is expected that the cost and time problem could be reduced by providing a pre-clock tree synthesis verification method at the RTL level without confirming the CTS result using the time-consuming licensed EDA tool.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.74-75
• /
• 2013

Pseudolite is a contraction of the term "pseudo-satellite," used to refer to something that is not a satellite which performs a function commonly in the domain of satellites. Pseudolite are most often small transceivers that are used to create a local, ground-based GPS alternative. This paper proposes a clock synchronization scheme for pseudolite.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.6B
• /
• pp.840-847
• /
• 2001

본 논문에서는 클럭 동기 회로에 사용되는 다차 함수 형태의 결합 필터를 선형 근사화 하는 알고리즘을 제안하고 이를 하드웨어로 구현한다. 정합 필터와 보간필터에 의한 클럭 동기회로는 수신기를 전 디지털 회로를 구현하기 위해 선호되지만 계산량이 증가하는 단점이 있다. 본 논문에서는 정합 필터의 임펄스 응답을 갖는 결합 보간 필터를 구현하고, base 함수의 적용을 선형 근사화 하여 필터의 계산량을 감소시켰다. 본 논문에서는 선형 근사화된 결합 보간 필터의 동작을 Matlab을 통한 시뮬레이션과 ALTERA Chip으로 테스트하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1735-1740
• /
• 2005

SoC design integrates many IPs that operate at different frequencies and the use of the different clock for each IP makes the design the most effective one. An asynchronous FIFO is required as a kind of a buffer to connect IPs that are asynchronous. However, in many cases, asynchronous FIFO is designed improperly and the cost of the wrong design is high. In this paper, an asynchronous FIFO is designed to transfer data across asynchronous clock domains by using a valid bit scheme that eliminates the problem of the metastability and synchronization altogether. This FIFO architecture is described in HDL and synthesized to the Bate level to compare with other FIFO scheme. The subject mater of this paper is under patent pending.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1345-1352
• /
• 2014

Bus architecture of SoC has been replaced by NoC in recent years. Noc uses the multi-clock domains to transmit and receive data between neighbor network interfaces and they have same frequency, but a phase difference because of clock skew. So a synchronizer is used for a mesochronous frequency in interconnection between network interfaces. In this paper the metastability is defined and analyzed in a D latch and a D flip-flop to search the possibilities that data can be lost in the process of sending and receiving data between interconnects when a local frequency and a transmitted frequency have a phase difference. 180nm CMOS model parameter and 1GHz are used to simulate them in HSpice. The simulation results show that the metastability happens in a latch and a flip-flop when input data change near the clock edges and there are intermediate states for a longer time as input data change closer at the clock edge. And the next stage can lose input data depending on environmental conditions such as temperature, processing variations, power supply, etc. The simulation results are very useful to design a mescochronous synchronizer for NoC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1464-1474
• /
• 1994

GPS(Global Positioning System)is a satellite-based navigation system that we can survey where we are, anywhere and anytime. In this paper, delay-lock loop of the receiver which detects the navigation data is theoretically analyzed, and designed using the digital logic circuit. Also logic operations for the synchronization are analyzed. The designed system consists of the correlator which correlates the received C/A code and the generated C/A code in the receiver, the C/A code generator which generates C/A code of selected satellite, and the direct digital clock syntheizer which generates the clock of the C/A code generator to control the C/A code phase and clock rate. From the analyses results of the proposed digital delay-lock loop system, the system has the detection propertied over 90% when its input signal power is above-113.98dB. The influence of input signal variation of digital delay loop, which is the input of A/D converter, is investigated and the performance is analyzed with the variation of threshold level via the computer simulation. The logic simulation results show that the designed system detects precisely the GPS navigation data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.1
• /
• pp.69-74
• /
• 2003

In this paper, we propose the synchronization recovery algorithm which is suitable to wireless Multimedia of wireless channel situation which is being used OFDM signaling method. The basic of the suggested clock synchronization. restoration Algorithm is to getting the shock response of channel or getting the multipath strength profile through IFTT after the getting the frequency, response of deducted channel from channel deducted of receiver and to trace the location in the channel energy concentrated area of timing area. And it also analysis the start point of 64-QAM and 16-QAM if the sampling clock offset has the sample of ${\pm}$ 1-3, and we identified the occurance of performance deterioration when occures more than 2 samples of offset to compare with star point and BER performance in optimum sampling point result of BER performance checking, and we know that the recovery algorithm proposed algorithm also provide excellent synchronization characteries under frequency, selecting fading channel as result of simulation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1301-1308
• /
• 2012

In this paper, the low-power clock generator synchronized with the AC power signal using the adiabatic dynamic CMOS logic (ADCL) buffer is proposed for adiabatic logics. To reduce the power dissipation in conventional CMOS logic and to maintain adiabatic charging and discharging with low power for the ADCL, the clock signal of logic circuits should be synchronized with the AC power source. The clock signal for an adiabatic charging and discharging with the AC power signal was generated with the designed Schmitt trigger circuit and ADCL frequency divider using the ADCL buffer. From the simulation result, the power consumption of the proposed clock generator was estimated with approximately 1.181uW and 37.42uW at output 3kHz and 10MHz respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.10B
• /
• pp.1470-1474
• /
• 2001

8B/10B 선로부호를 채택한 기가비트 이더넷 PCS 수신측에서는 동기부의 바이트 동기획득과 수신부의 디코딩을 위해 Running Disparity(RD) 에러인 데이터열을 검출해야 한다. 기존의 RD 에러 검출 방법은 직렬 입력 비트에서 RD 에러를 검출하였으나 제안하는 RD 에러 검출 방법은 125MHz 속도의 10비트 데이터열을 받아 4비트열과 6비트열로 나누어 바이트 클럭에 따라 RD를 계산하고 계산된 이전의 RD값과 현재의 RD값을 비교하며 RD 위반 에러 데이터를 검출한다. 이는 기존의 RD 에러 검출 방법이 비트 클럭과 니블 클럭에 따라 RD 에러를 검출하기 때문에 야기되는 초고속 처리에 대한 한계를 해결한 것이며 기가비트 이더넷에 적합한 새로운 RD 에러 검출 방법이다.