• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.355-363
• /
• 2015

Advancement in the medical field provides an opportunity for the development of medical equipment and also enable accurate diagnosis for the inspection and the treatment of diseases. The aging of equipment due to the frequent operation produce uncertainty in the patient exposure dose, so a quality control was implemented by establishing a safety management system on a regular basis. The x-ray tube voltage (kVp), which is directly involved in the patient exposure dose and the life of the equipment, needs periodic performance for the quality control, but it has a limitation due to the time and the cost. In this study, we proposed a new method for measuring the kVp with ease by using the Y and Cu to solve the problem of the time and cost. We also evaluated the usefulness and the effectiveness of the new method and its accuracy through the kVp measurement. After securing the condition, the amount of the tube current and evaluating the usefulness and effectiveness of kVp measured using Y and Cu. The density range used was at 0.5-1.0, kVp was in the range of ${\pm}10%$, then, we recorded the change in concentration as % of Y and Cu. This experiment showed that when Cu and Y was at 75 kVp, concentration was the same, and when the kVp was changed to 65 ~ 85 %, a gradual increase in concentration to 85 ~ 110 % was noted.

• Conservation Science in Museum
• /
• v.23
• /
• pp.1-16
• /
• 2020

In this paper, Gilt-bronze Standing Avaolkiteshvara (National Treasure No. 293, M355) excavated at Gyuam-ri in Buyeo was observed with a microscope to identify the production technique applied to it. It was also analyzed with XRF and hard X-ray to identify the composition and the surface treatment techniques and casting method applied. In this statue, Avalokiteshvara is standing upright on a lotus pedestal. The lotus designs on the pedestal and those on the shawl flowing down on both sides of the statue are characteristic of Buddhist statues from the seventh century or later. The use of supports to affix the outer and inner molds and traces of injected cast were observed in the interior of the pedestal. The blisters on the arms and pedestal created during the bronze casting indicate the use of lost-wax casting, which was popularly employed for the production of mid- or small-sized gilt-bronze Buddhist statues in ancient times. The composition analysis identified a copper-tin-lead ternary alloy in the interior of the statue that was conventional used in the sixth and seventh centuries. It is likely that this simple alloy was used to facilitate casting and produce clearer expressions of designs and ornaments on the statue. Mercury (Hg) was detected on the surface of the statue, indicating the use of amalgam-plating with gold (Au) dissolved in mercury. This plating method is a common surface treatment technique used for small gilt-bronze statutes in ancient Korea.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.6-6
• /
• 2018

본 연구에서는 고문헌에 기록된 도금 재료와 도금법 등을 확인하고 이를 기초자료로 활용하여 매실산을 사용한 금(Au)-수은(Hg) 아말감기법으로 고대 도금(鍍金)기술을 되살리고, 이를 토대로 경주 월지에서 출토된 금동삼존판불을 복원하였다. 먼저, 전통 도금법을 되살리기 위해서, "오주서종박물고변", "확지신편", 조선시대 각종 의궤 등에 공통적으로 기록되어 있는 매실에 주목하고, 매실을 3~4개월 발효 숙성 후 착즙한 뒤 그것을 농축하여 만든 매실산을 도금 실험에 적용하였다. 금아말감 도금을 위하여 월지 출토 금동삼존판불의 바탕소지금속인 청동삼존판불을 구리와 주석 89:11(Cu:6kg, Su:750g)로 합금하여 주물사 주조법으로 복원하였으며, 동일한 합금비로 제작된 $2.3cm{\times}3.5cm$(가로${\times}$세로)의 시편에 사전 실험을 실시하였다. 현대적 산처리 방식에 사용되는 질산과 전통방식으로 사용되는 매실산으로 시편에 산처리 한 후 각각 비교해 보고, 금분과 금박, 상온과 가온에 따른 아말감상태를 비교하는 실험을 진행하였는데, 실험에 사용된 매실산 70%는 pH가 1.94로, 오늘날 산처리에 사용하고 있는 질산 20%와는 차이가 있지만, 청동 시편 실험을 통해 매실산에 20분 정도 담근 뒤 금아말감을 도포 후 24시간 지나 가열($380{\sim}400^{\circ}C$) 했을 때 금도금이 잘 되어, 현대적 방법인 질산처리로 도금을 한 시편과 큰 차이가 없는 것으로 관찰되었다. 사전 실험을 통한 결과를 적용한 월지 출토 금동삼존판불 복원은 청동삼존판불 표면처리, 금-수은 합금 및 도금하기, 도금 후 표면처리의 순서로 진행되었는데, 금과 소지금속의 밀착력을 높이기 위해 표면을 숯을 이용해 탈지한 후 물로 씻어내고 매실산을 도포하여 20분 동안 두어 부식 및 세척을 시행하였다. 금도금을 위한 금-수은아말감은 가온할 때 수은이 증발하는 양을 고려하여 금1 : 수은10 비율로 합금하여 완성하였으며, 금아말감 도포 후 약 24시간 지난 다음, $380{\sim}400^{\circ}C$에 가열하여 수은을 기화시켜 도금작업을 완성하였다. 금아말감도금은 평균적으로 6~7차례 시행하여야 완벽히 도금되지만, 본 연구에서는 단 4차례의 도금만으로 금아말감도금을 완성시켰는데, 이것은 금아말감을 바탕소지인 청동에 도포한 후 24시간 동안 금아말감과 청동과의 반응 시간을 두게한 것이 큰 역할을 한 것으로 보이며, 이는 청동시편을 이용한 실험과 과학적 분석을 통하여 입증하였다. SEM으로 표면을 관찰한 결과 아말감 도포시간이 즉시인 경우 도금이 거의 되지 않은 것을 확인할 수 있었고 36시간이 넘어갈 경우 금 도금층이 불균일하게 관찰되었으므로 도금시간은 12시간~24시간 이내가 적절함을 확인할 수 있었다. EDS로 성분을 분석한 결과 산처리 시간이 20분인 시료의 경우 5 wt% 내외로 수은의 비율이 다른 시료에 비해 낮은 것을 확인할 수 있었다. 실험 및 분석결과 산처리 시간이 20분이고 아말감 도포시간이 24시간일 때 도금이 잘 이루어지므로 이 결과를 토대로 금동삼존판불을 복원하였다. 이번 연구를 통해 도금법에 표면을 세척하고 부식시키기 위해 사용한 물질이 매실산임을 찾아내어 확인할 수 있었는데, 이러한 점 에서 이 연구의 가장 큰 의미는 전통 소재와 기술을 복원한 것으로, 앞으로 매실산을 이용한 금 도금기술은 관련 학계에도 큰 기여를 할 것으로 기대된다.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.112-121
• /
• 2015

In this study, Copper Azole (CuAz), a domestically available wood preservative for pressure treatment, was employed to perform an experimental research on its infiltration and decay properties in Japanese Red Pine. Test specimens were pressure-injected with CuAz-2 preservative to measure its preservative effectiveness, and then its impact on weight and mass losses. Furthermore, wood specimens were treated with CuAz-2 preservatives of various concentration levels before they were decayed with brown-rot-fungi in order to observe decay properties on light microscope (LM) and field emission scanning electron microscope (FE-SEM). As a result, untreated specimen by Fomitopsis palustris showed the mass loss of more than 40%, and the value of preservative effectiveness of CuAz-2 by indoor decay was $1,73-3.32kg/m^3$. The concentration levels of CuAz-2 preservative were shown to cause significant variations in terms of decay progresses in the cross section, radial section, and tangential section. By contrast, untreated specimens had underwent serious decays in early wood, late wood, longitudinal resin canals, and ray, which led to vertical destruction of wood texture. As for the radial section, ray tracheid, ray parenchyma cell, and window like pits were decayed and destroyed. In the case of tangential section, uniseriate rays and vertical resin canals were seriously decayed. In conclusion, this study indicates that the adequacy of the current CuAz injection amount should be reviewed in the domestic environment because there are significantly different decays at different decay conditions.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.1
• /
• pp.21-28
• /
• 2018

The contents of total nitrogen, total phosphate, and total potash are important factors to determine the application rate of the organic fertilizers to arable lands. The concentrations of nutrient, organic matter, salt, water, heavy metal in mixed oil cakes and mixed organic fertilizers in circulation were investigated with 141 and 179, respectively. The mean levels of total nitrogen, total phosphate, and total potash in organic fertilizers of from 2015 to 2017 were 4.9%, 2.8%, 1.7%, respectively. The average contents of organic matter, salt, and water were 77.0%, 11.5%, and 0.3%, in mixed oil cakes, and 72.3%, 11.7%, 0.5% in mixed organic fertilizer, respectively. The maximum concentrations of Cr, Cu, Ni, and Zn were found to be in accordance with the official standard of commercial fertilizer. In order to promote balanced nutrient absorption of crops, it is necessary to increase the average content of total potash of the organic fertilizers to 3.2%.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.451-463
• /
• 2021

In this study we conducted component analyses of portable XRF detectors using four Au-Cu alloy standard samples to improve their accuracy by drawing up a calibration curve based on ICP-OES standard values. The portable XRF analysis found absolute errors of 0.3 to 3.7 wt% for Au and 0.2 to 8.2 wt% for Cu, confirming that the error range and standard deviation differed from one detector to another. Furthermore, the calibration curve improved their accuracy, such that the relative error rates of Au and Cu decreased from 9.8% and 14% to 3.5% and 3.7%, respectively. Accordingly, an experiment to confirm the calibration curve was conducted using unknown samples, finding that the measured values of the unknown samples fell on the calibration curve. Therefore, to accurately analyze the components of metal cultural heritage items, it is necessary to prepare a calibration curve for each element after checking whether the detector is suitable for the artifact.

• Journal of Conservation Science
• /
• v.38 no.2
• /
• pp.133-143
• /
• 2022

In this study, we analyzed the rickshaw (Owned by the Daegu Modern History Museum) by measuring each material. The purpose of the study was to identify the materials in modern cultural assets that utilize a variety of materials in a complex way, and establish basic data for preservation and management. Using portable X-ray fluorescence analyzers (P-XRF), species identification, fiber identification, paint film analysis (microscope observation, SEM-EDS, FTIR) on metal, wood, fiber and paint was carried out. Brass, an alloy of Copper, Zinc and Iron, was measured in the metal parts. Further, wooden parts, such as Oak (Quercus acutissima), Japanese Cedar (Cryptomeria japonica), Bamboo (Bambusoideae). Torreya nucifera (Torreya spp.) were identified in the body. Fiber parts consisted mainly of cotton, but some parts were also made of leather. In terms of paint, rickshaws were applied with multiple layers, using cashew (synthetic paint used in place of lacquer). In sum, the rickshaw body part appeared to overlap with layers of fiber, metal (soild), paint, and colored (black, red) layer.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.717-726
• /
• 2022

This study was conducted to assess the geochemical contamination degree of As, Cd, Cu, Pb, Sb, and Zn in the soil and water samples from an abandoned gold mine. Enrichment Factor (EF), Geoaccumulation Index (Igeo), and Pollution Load Index (PLI) were carried out to assess the geochemical contamination degree of the soil samples. Variations of sulfate and heavy metals concentration in water samples were determined to identify the geochemical distribution with respect to the distance from the mine tailing dam. Geochemical pollution indices indicated significant contaminated with As, Cd, Pb, and Zn in the soil samples that areas close to the mine tailing dam, while, Sb showed similar indices in all soil samples. These results indicated that the As, Cd, Pb, and Zn dispersion has occurred via anthropogenic sources, such as mining activities. In terms of water samples, anomalies in the concentrations of As, Cd, Zn, and SO₄^2- was determined at specific area, in addition, the concentrations of the elements gradually decreased with distance. This result implies the heavy metals distribution in water has carried out by the weathering of sulfide minerals in the mine tailing and soil. The study area has been conducted the remediation of contaminated soil in the past, however, the geochemical dispersion of heavy metals was supposed to be occurred from the potential contamination source. Therefore, continuous monitoring of the soil and water is necessary after the completion of remediation.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.24-37
• /
• 2023

This study analyzes the materials and external characteristics of the Angbu-ilgu, a kind of scaphe sundial, which was newly designated as a Korean Treasure in 2022. The Angbu-ilgu Treasure is owned by three institutions - the National Palace Museum Of Korea, Gyeongju National Museum, and Sungshin Women's University Museum - and is similar as a twin in its material, size, outward appearance, as well as production techniques that include casting, silver inlays, and metal joints. The Three-Treasure Angbu-ilgu is made of brass in the ratio of 90.6: 6.0: 1.8 with Cu: Zn: Pb. This composition clearly differs from Treasure No. 845, an Angbuilgu which has a composition ratio of 82.2: 3.7: 11.8 with Cu: Zn: Pb. In this new Angbu-ilgu Treasure, the hemisphere's stand has four vertical pillars sculpted in a dragon pattern and bilateral wings carved in a cloud pattern on the pillars, which are joined to the hemisphere's horizontal ring with rivets and silver solders, respectively. The dragon-in-clouds pillar (雲龍柱) shows the most outstanding formative beauty of the various Angbu-ilgu pillars produced in the late Joseon Dynasty. It can be seen that the altitude of the north pole engraved on the Angbu-ilgu was made after 1713. Production is, however, actually estimated to have occurred close to the 19th century, the era of the Jinju Kang family, who were professional Angbuilgu makers. Hopefully, this study will lead to a historical science and technology review with modern scientific instruments analyzing the materials and external characteristics of the three Angbu-ilgus designated as a Korean Treasure in 2022.

• Conservation Science in Museum
• /
• v.30
• /
• pp.101-126
• /
• 2023

Bogjeon chongtong, a military firearm from the Joseon Dynasty, remains undocumented with extant ones only discovered relatively recently. This study examined the structural and material characteristics of the bogjeon chongtong by comparing the specifications, shapes, inscriptions, and components of 12 pieces of bogjeon chongtong, which have not been described in detail to date. Bogjeon chongtong has certain set properties in terms of its specifications and shapes. This study also estimated the number of projectiles fired at once by comparing the specifications and records. In terms of design, the handle slot has an outline engraved in relief along with the name of the artifact. The inscribed outline is the most notable feature of the bogjeon chongtong that is not seen in other chongtong artifacts. Therefore, this study analyzed the inscription techniques used in the production process. The main ingredients of bogjeon chongtong are copper and tin, with a tin content of 6wt%. It was confirmed that this is highly similar to the average composition of bronze gunpowder weapons of the Joseon Dynasty as identified in prior research, and that it is also similar to the bronze gunmetal of medieval Europe. These conclusions were drawn in consideration of the material properties required for gunpowder weapons, which allows the inference that the materials used for firearms were selected by prioritizing functionality based on the alloy ratio.