• Korean Journal of Culture and Social Issue
• /
• v.17 no.4
• /
• pp.381-393
• /
• 2011

Eco driving is a strategy to reduce energy consumption and greenhouse gas emissions from motor vehicle. However, it has not received much attention until recently. Psychological studies on this issue have been limited and the majority of existing studies have primarily been based on engineering and educational approaches. This study examined the effects of a self-management technique on two driving behaviors: speeding and putting the gears in neutral while waiting at the signal. The self-management technique consisted of three behavior interventions: goal-setting, self-monitoring, and reward. Three drivers participated in this study. An AB multiple baseline design across participants was adopted. Results showed that the self-management technique was effective in increasing both driving behaviors. Implications of the present findings and suggestions for future research were discussed.

• Convergence Security Journal
• /
• v.22 no.1
• /
• pp.61-69
• /
• 2022

When a large-scale cyber attack or terrorism occurs and the country suffers enormous damage or poses a fatal threat to security, social interest in nurturing cybersecurity workforce increases. In addition, the government often suggests policies and guideline to train cybersecurity workforce. However, the system that can systematically manage trained cyber workforce after they are employed in related organizations or companies is still weak. Software workforce has a standardized qualification level model, so appropriate jobs are set and managed for each level. Cyber workforce also need a specialized qualification level model that takes into account their career, academic background, and education&training performance. By assigning a qualification level, the duties that can be performed for each level should be set, and the position and duty of the department should also be assigned in consideration of the level. Therefore, in this paper, we propose a qualification level model for cyber security workforce.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.2
• /
• pp.56-62
• /
• 2016

The purpose of this research is to explore both on-site manager's and resident's assessment of the Automated Vacuum Waste Collection System (AVWCS) in suburban apartment complexes. In doing so, a self-administered questionnaire survey was conducted in 10 districts and their 11 apartment complexes in the Seoul Metropolitan Area. The main findings can be summarized as follows: the managers considered the AVWCS to be economically efficient and environmentally fiendly, and suggested that the system be managed in a more professional way, with an advanced technology and by more qualified technicians. The recommendation was related to residents' complaints and frequent mechanical failures frequently occurring in waste inlets and waste transport piping of the system. For residents using the system, the system was satisfactory, and should be necessarily improved with more user-friendly features. Further, most comments made by the residents were relevant to waste inlets such as safety, cleanliness, prompt repair, odor reduction, waste separation. It's of significant to train residents with how to properly use the system, which is expected to substantially fall a number of residents' complaints. Therefore, both professional management of AVWCS and regular workshops on how to utilize it are crucial in order to heighten its strengths.

• Korean Journal of Community Nutrition
• /
• v.26 no.5
• /
• pp.327-336
• /
• 2021

Objectives: This study was conducted to create a 3D printable snack dish model for the elderly with low food or fluid intake along with barriers towards eating. Methods: The decision was made by the hybrid-brainstorming method for creating the 3D model. Experts were assigned based on their professional areas such as clinical nutrition, food hygiene and chemical safety for the creation process. After serial feedback processes, the grape shape was suggested as the final model. After various concept sketching and making clay models, 3D-printing technology was applied to produce a prototype. Results: 3D design modeling process was conducted by SolidWorks program. After considering Dietary reference intakes for Koreans (KDRIs) and other survey data, appropriate supplementary water serving volume was decided as 285 mL which meets 30% of Adequate intake. To consider printing output conditions, this model has six grapes in one bunch with a safety lid. The FDM printer and PLA filaments were used for food hygiene and safety. To stimulate cognitive functions and interests of eating, numbers one to six was engraved on the lid of the final 3D model. Conclusions: The newly-developed 3D model was designed to increase intakes of nutrients and water in the elderly with dementia during snack time. Since dementia patients often forget to eat, engraving numbers on the grapes was conducted to stimulate cognitive function related to the swallowing and chewing process. We suggest that investigations on the types of foods or fluids are needed in the developed 3D model snack dish for future studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.310-316
• /
• 2019

In automotive application, customers are demanding high efficiency and various functions for convenience. The demand for these automotive applications is steadily increasing. In this study, it has been studied the analysis of heat flow to improve the PCB(printed circuit board) heating performance of WPC (wireless power charger) recently developed for convenience. The charging performance of the wireless charger has been reduced due to power dissipation and thermal resistance of PCB. Therefore, it has been proposed optimal PCB design, layout and position of electronic parts through the simulation of heat flow analysis and PCB design was analyzed and decided at each design stage. Then, the experimental test is performed to verify the consistency of the analysis results under actual environmental conditions. In this paper, The PCB modeling and heat flow simulation in transient response were performed using HyperLynx Thermal and FloTHERM. In addition, the measurement was performed using infrared thermal imaging camera and used to verify the analysis results. In the final comparison, the error between analysis and experiment was found to be less than 10 % and the heating performance of PCB was also improved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.184-188
• /
• 2019

The purpose of this paper is to investigate the effectiveness of Google Classroom (GC) and to examine the satisfaction of professors using GC as an online environment at a Mongolian University. Fourteen professors designed the lecture model and provided lessons using GC at D University for four weeks. GC provides new learning opportunities that are more efficient than face-to-face learning, because it can overcome the limitations of time and space. The results of the survey conducted with the professors who participated in the class to explore the effectiveness of GC show that the system provides: cooperation: 100% (strongly agree=7, Agree=7), personal learning opportunity: 100% (strongly agree=10, Agree=4), ease in learning: 100% (strongly agree=11, Agree=3), suitability: 100% (strongly agree=8, Agree=6), feedback opportunities: 100% (strongly agree=7, Agree=7), connection: 100% (strongly agree=7, Agree=7), accessibility: 100% (strongly agree=7, Agree=7), learning effectiveness: 100% (strongly agree=9, Agree=5), paperless experience: 100% (strongly agree=8, Agree=6). The professors who attended the class reacted positively to the use of GC, proving that the application of GC at this Mongolian University was appropriate and efficient. The use of GC is expected to help educational institutions strengthen and improve online learning, especially by breaking from traditional learning, and opening new paths for professors and students in Mongolia.

• Journal of the Korean earth science society
• /
• v.45 no.3
• /
• pp.260-276
• /
• 2024

The purpose of this study is to explore whether pre-service teachers majoring in earth science improve their perception of computational thinking through STEAM classes focused on engineering-based wave power plants. The STEAM class involved designing the most efficient wave power plant model. The survey on computational thinking practices, developed from previous research, was administered to 15 Earth science pre-service teachers to gauge their understanding of computational thinking. Each group developed an efficient wave power plant model based on the scientific principal of turbine operation using waves. The activities included problem recognition (problem solving), coding (coding and programming), creating a wave power plant model using a 3D printer (design and create model), and evaluating the output to correct errors (debugging). The pre-service teachers showed a high level of recognition of computational thinking practices, particularly in "logical thinking," with the top five practices out of 14 averaging five points each. However, participants lacked a clear understanding of certain computational thinking practices such as abstraction, problem decomposition, and using bid data, with their comprehension of these decreasing after the STEAM lesson. Although there was a significant reduction in the misconception that computational thinking is "playing online games" (from 4.06 to 0.86), some participants still equated it with "thinking like a computer" and "using a computer to do calculations". The study found slight improvements in "problem solving" (3.73 to 4.33), "pattern recognition" (3.53 to 3.66), and "best tool selection" (4.26 to 4.66). To enhance computational thinking skills, a practice-oriented curriculum should be offered. Additional STEAM classes on diverse topics could lead to a significant improvement in computational thinking practices. Therefore, establishing an educational curriculum for multisituational learning is essential.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.119-126
• /
• 2023

Today, in order to improve fuel efficiency and dynamic behavior of automobiles, an era of light weight and simplification of automobile parts is being formed. In order to simplify and design and manufacture the shape of the product, various components are integrated. For example, in order to commercialize three products into one product, product processing is occurring to a very narrow area. In the case of existing parts, precision die casting or casting production is used for processing convenience, and the multi-piece method requires a lot of processes and reduces the precision and strength of the parts. It is very advantageous to manufacture integrally to simplify the processing air and secure the strength of the parts, but if a deep and narrow pocket part needs to be processed, it cannot be processed with the equipment's own spindle. To solve a problem, research on cutting processing is being actively conducted, and multi-axis composite processing technology not only solves this problem. It has many advantages, such as being able to cut into composite shapes that have been difficult to flexibly cut through various processes with one machine tool so far. However, the reality is that expensive equipment increases manufacturing costs and lacks engineers who can operate the machine. In the five-axis cutting processing machine, when producing products with deep and narrow sections, the cycle time increases in product production due to the indirectness of tools, and many problems occur in processing. Therefore, dedicated machine tools and multi-axis composite machines should be used. Alternatively, an angle spindle may be used as a special tool capable of multi-axis composite machining of five or more axes in a three-axis machining center. Various and continuous studies are needed in areas such as processing vibration absorption, low heat generation and operational stability, excellent dimensional stability, and strength securing by using the angle spindle.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.240-250
• /
• 2012

For this study, 373 students of H cyber university were chosen to conduct a survey in the spring semester of 2011. The result of this study through structural equation modeling analysis was as follows: First, organizational support significantly affected perceived isolation. Second, organizational support and perceived isolation significantly affected satisfaction. Third, perceived isolation and satisfaction significantly affected learning persistence, while organizational support didn't. In addition, satisfaction was verified as a mediating variable between organizational support, satisfaction, and learning persistence, and satisfaction was verified as a mediating variable between perceived isolation, organizational support and learning persistence. These results imply that perceived isolation and organizational support should be considered for the design and development strategies of instructional courses in order to enhance satisfaction and learning persistence of students in cyber educational environment.

• 전자공학회논문지 IE
• /
• v.49 no.1
• /
• pp.12-17
• /
• 2012

Fast development of ubiquitous technology prompted the broadening of the related application area. Application of ubiquitous techniques and system into the construction sites may give us many benefits. There are always a lot of hazard situations in construction sites, and the falling is known to have the high accident rate. To prevent the falling, there has been a lot of efforts including safety education and use of safety gears. In this study, we designed, fabricated and tested a system that can monitor the worker's safety and location informations in real time by using the wireless technology of TOA and RSSI. We used ATmegal28 that is popular in the industrial equipments as MCU and NanoPan 5357 module from Nanotron and CC2500 chipset from TI for radio circuits. We also used 3-axis accelerometer and pressure MEMS sensors to obtain the environmental information, and therefore to aquire the informations of the worker's movement and altitude. We used Labview software from National Instrument to monitor and control the system. We developed the system to send the warning alarms to the server operator and the workers when the workers in the danger zone did not wear the safety hook.